Anope Version  S V N
--------------------
** ADDED    CONFIGURATION DIRECTIVES **
# NSResendDelay <time>  [RECOMMENDED]
#     Sets the minimum length of time between consecutive uses of the
#     RESEND command.  If not given, this restriction is disabled (note
#     that this allows "resend flooding" or "mail bombing").

NSResendDelay  90s

** MODIFIED CONFIGURATION DIRECTIVES **

** DELETED  CONFIGURATION DIRECTIVES ** 

Anope Version 1.7.14
--------------------
** ADDED    CONFIGURATION DIRECTIVES **

** MODIFIED CONFIGURATION DIRECTIVES **

** DELETED  CONFIGURATION DIRECTIVES ** 

Anope Version 1.7.13
--------------------
** ADDED    CONFIGURATION DIRECTIVES **

** MODIFIED CONFIGURATION DIRECTIVES **

** DELETED  CONFIGURATION DIRECTIVES ** 

Anope Version 1.7.12
--------------------
** ADDED    CONFIGURATION DIRECTIVES **

# BSFantasyCharacter [REQUIRED]
#    This option allows you to change the default prefix for fantasy
#    commands in channels. This character will have to be prepended to all
#    fantasy commands. If you choose "!" (the default), fantasy commands
#    will, for example, be "!kick", "!op", etc.

BSFantasyCharacter "!"

** MODIFIED CONFIGURATION DIRECTIVES **

** DELETED  CONFIGURATION DIRECTIVES ** 

Anope Version 1.7.11
--------------------
** ADDED    CONFIGURATION DIRECTIVES **

# NickLen [REQUIRED]
#     Set this to the maximum allowed nick length on your network. Anope does
#     not support values larger than 31, so setting them makes no sense. Be
#     sure to set this correctly, as setting this wrong can result in services
#     being disconnected from the network.

NickLen 31

** MODIFIED CONFIGURATION DIRECTIVES **
# UserKey1|2|3 <value> [RECOMMENDED]
#
#     These keys are required to initiate the random number generator. These
#     numbers MUST be random as you want your passcodes to be random. Don't
#     give these keys to anyone! Keep them private!
#
#     *** NOTE ***
#     If you don't enable these, or keep their default values, any talented
#     programmer would be able to easily "guess" random strings used to mask
#     information. Be safe, and come up with three different 7 digit numbers

#UserKey1 9866235
#UserKey2 8362013
#UserKey3 2362899

** DELETED  CONFIGURATION DIRECTIVES ** 

Anope Version 1.7.10
--------------------
** ADDED    CONFIGURATION DIRECTIVES **

** MODIFIED CONFIGURATION DIRECTIVES **

** DELETED  CONFIGURATION DIRECTIVES ** 

Anope Version 1.7.9
-------------------
** ADDED    CONFIGURATION DIRECTIVES **
# IRCDModule <module_name>  [REQUIRED]
#     The ircd protocol module should be used when connecting anope to your
#     chosen IRCD.  This should be one of the following options, or a file 
#     provided by your IRCD author.
#
#     Bahamut 1.4.27 [or later]         - "bahamut"
#     DreamForge 4.6.7                  - "dreamforge"
#     Hybrid IRCd 7.0 [experimental]    - "hybrid"
#     InspIRCd 1.0 Beta 5               - "inspircd"
#     InspIRCd module is provided by Brain <brain@inspircd.org> 
#     Plexus 2.0 [or later]             - "plexus"
#     PTLink 6.15.0 [experimental]      - "ptlink"
#     RageIRCd 2.0.0 [beta-6 of later]  - "rageircd"
#     Ratbox 2.0.6 [or later]           - "ratbox"
#     ShadowIRCD 4.0x [beta 7 or later] - "shadowircd"
#     Solid IRCD 3.4.x [3.4.6 or later] - "solidircd"
#     UltimateIRCd 3.0.0 [or later]     - "ultimate3"
#     UltimateIRCd 2.8.2 [or later]     - "ultimate2"
#     Unreal 3.2 [beta-19 or later]     - "unreal32"
#     Unreal 3.1.1 [or later]           - "unreal31"
#     ViagraIRCd 1.3.x [or later]       - "viagra"
#

#IRCDModule "unreal32"

# HostCoreModules <list> [RECOMMENDED]
#     These modules will be loaded as part of HostServ's core.
#     It is not recommended you change these settings unless you are 
#     sure you understand exactly what it is you are doing.
HostCoreModules "hs_help hs_on hs_off hs_group hs_list hs_set hs_setall hs_del hs_delall"

# MemoCoreModules <list> [RECOMMENDED]
#     These modules will be loaded as part of MemoServ's core.
#     It is not recommended you change these settings unless you are 
#     sure you understand exactly what it is you are doing.
MemoCoreModules "ms_send ms_cancel ms_list ms_read ms_del ms_set ms_info ms_rsend ms_check ms_staff ms_sendall ms_help"

# HelpCoreModules <list> [RECOMMENDED]
#     These modules will be loaded as part of HelpServ's core.
#     It is not recommended you change these settings unless you are 
#     sure you understand exactly what it is you are doing.
HelpCoreModules "he_help"

# BotCoreModules <list> [RECOMMENDED]
#     These modules will be loaded as part of BotServ's core.
#     It is not recommended you change these settings unless you are 
#     sure you understand exactly what it is you are doing.
BotCoreModules "bs_help bs_botlist bs_assign bs_set bs_kick bs_badwords bs_act bs_info bs_say bs_unassign bs_bot bs_fantasy bs_fantasy_kick bs_fantasy_kickban bs_fantasy_owner bs_fantasy_seen bs_fantasy_unban"

# OperCoreModules <list> [RECOMMENDED]
#     These modules will be loaded as part of OperServ's core.
#     It is not recommended you change these settings unless you are 
#     sure you understand exactly what it is you are doing.
OperCoreModules "os_help os_global os_stats os_oper os_admin os_staff os_mode os_kick os_clearmodes os_killclones os_akill os_sgline os_sqline os_szline os_chanlist os_userlist os_logonnews os_randomnews os_opernews os_session os_noop os_jupe os_ignore os_set os_reload os_update os_restart os_quit os_shutdown os_defcon os_chankill os_svsnick os_oline os_umode os_modload os_modunload os_modlist os_modinfo"

# NickCoreModules <list> [RECOMMENDED]
#     These modules will be loaded as part of NickServ's core.
#     It is not recommended you change these settings unless you are 
#     sure you understand exactly what it is you are doing.
NickCoreModules "ns_help ns_register ns_group ns_identify ns_access ns_set ns_drop ns_recover ns_release ns_sendpass ns_ghost ns_alist ns_info ns_list ns_logout ns_status ns_update ns_getpass ns_getemail ns_forbid ns_suspend"

# ChanCoreModules <list> [RECOMMENDED]
#     These modules will be loaded as part of ChanServ's core.
#     It is not recommended you change these settings unless you are 
#     sure you understand exactly what it is you are doing.
ChanCoreModules "cs_help cs_register cs_identify cs_set cs_xop cs_access cs_akick cs_drop cs_sendpass cs_ban cs_clear cs_modes cs_getkey cs_invite cs_kick cs_list cs_logout cs_topic cs_info cs_getpass cs_forbid cs_suspend cs_status"

# OSOpersOnly [RECOMMENDED]
#     If this is defined, only IRC Operators will be permitted to use
#     OperServ, regardless of module based command access restrictions.

OSOpersOnly

# NSEmailMax [OPTIONAL]
# Module: ns_maxemail
#
# Limit the amount of registrations with the same email address to the
# amount given here. If set to 0 or left commented, there will be no limit
# enforced when registering new accounts or using /msg NickServ SET EMAIL.
#
#NSEmailMax 1

# NSAutoOPDBName [OPTIONAL]
# Module: ns_noop
#
# Use the given filename as database for the autoop list. If not given,
# the default of "autoop.db" will be used.
#
#NSAutoOPDBName "autoop.db"

# OSInfoDBName [OPTIONAL]
# Module: os_info
#
# Use the given filename as database for the oper information lines.
# If not given, the default of "os_info.db" will be used.
#
#OSInfoDBName "os_info.db"

** MODIFIED CONFIGURATION DIRECTIVES **

# UserKey1|2|3 <value> [REQUIRED]
#     
#     These keys are required to initiate the random number generator. These
#     numbers MUST be random as you want your passcodes to be random. Don't
#     give these keys to no anyone! Keep them private!
#     For those pple who don't understand what to do here: Just pick three
#     _different_ _random_ numbers with about 6 or 7 digits and put them here.
#     If the keys don't work, they might be too long or you forgot to remove
#     the # in front of them. Example:
#     UserKey1 9866235

#     UserKey1 <your_first_random_number_here>
#     UserKey2 <your_second_random_number_here>
#     UserKey3 <you_third_random_number_here>

# Numeric [OPTIONAL]
#     Many ircd identify themselves with a Numeric ID when using this option
#     consult your ircds documentation before using this.
#Numeric "3AX"
#Numeric "4"

# ModuleDelayedAutoload [OPTIONAL]
#
# When compiled with module support, this contains a space separated list
# of modules to automaticaly load when services are ready for new clients.
# e.g. new pesudo clients such as CatServ :-) *meow*
# By default a number of modules that we found worth adding by default are
# loaded. Feel free to change this if you want to add more, or remove some
# from the list.
#
ModuleDelayedAutoload "cs_appendtopic cs_enforce ns_maxemail ns_noop os_info"

** DELETED  CONFIGURATION DIRECTIVES ** 

###########################################################################
#
# Proxy detection
#
###########################################################################

# Note: if ProxyDetect is not set, all parameters after it in this section
# are optional.

# ProxyDetect [OPTIONAL]
#
# Enables insecure proxy detection. Services will automatically
# scan each incoming user and akill those that use insecure proxy.
#
# Anope currently supports detection of Wingate (port 23), SOCKS4/5
# (port 1080), and HTTP proxy (ports 3128 and 8080). It uses the
# protocol of each proxy type to connect to an IRC server, it does
# not only check if the port is open (so your users may still have
# an open telnet server on their port 23 for example).
#
# WARNING: You should get the authorization of the administrator of
# the computer which runs the proxy detector before enabling it; not
# all administrators will accept it. Also note that in certain
# countries, port scanning is prohibited.
#
# This feature requires threading support to be compiled into Anope.

#ProxyDetect

# ProxyThreads <number> [REQUIRED]
#
# Sets the number of threads Services will launch when starting. Each
# thread will have the responsibility to scan queued hostname for
# proxies.
#
# This value must be set depending of the number of users you have
# on your network. The more threads are used, the more simultaneous
# checks can be done. Remember however, that threads are
# resource-consuming.
#
# WARNING: On Linux, each thread takes a background process, and there
# is an additional process used for thread management; this is a problem
# if you are limited in the number of background process you can use
# (on a paid shell for example).

ProxyThreads 5

# ProxyMessage... <message> [RECOMMENDED]
#
# Sets the notices that will be sent out to users before Services
# scan them for proxy. You may not use all of them, but just as much as
# necessary.

ProxyMessage1 "I will now detect if you're using an insecure proxy."
ProxyMessage2 "If you see a connection on port 23, 1080, 3128 or 8080 from"
ProxyMessage3 "my.box.net, please disregard it, as it is the detector in action."
ProxyMessage4 "See http://proxy.myirc.net/ for information about our proxy policy."
#ProxyMessage5 "Enter"
#ProxyMessage6 "whatever"
#ProxyMessage7 "you want"
#ProxyMessage8 "here."

# ProxyCheck... [OPTIONAL]
#
# Determines what types of proxy Anope will try to find (respectively
# Wingate on port 23, SOCKS4 on port 1080, SOCKS5 on port 1080, HTTP
# proxy on port 3128, HTTP proxy on port 8080 and HTTP proxy on port
# 80).

ProxyCheckWingate
ProxyCheckSocks4
ProxyCheckSocks5
ProxyCheckHTTP1
ProxyCheckHTTP2
ProxyCheckHTTP3

# ProxyTimeout <time> [REQUIRED]

# Sets the maximum length of time we allow a connect/read operation to
# take. If you set this value too high, your threads may hang on a single
# check for a very long time. The best is to try different values
# and see which one is the more efficient for your network.

ProxyTimeout 15s

# ProxyTestServer <ip> <port> [REQUIRED]
#
# Sets the *IP* and port of the IRC server to use as a target when
# testing users for proxy.

ProxyTestServer "1.2.3.4" 6667

# ProxyExpire <time> [RECOMMENDED]
#
# Sets the length of time before a proxy host cache entry expires, if
# not used. If this is not set the default time is 2 days.

ProxyExpire 30d

# ProxyCacheExpire <time> [REQUIRED]
#
# Sets the length of time before a normal host cache entry expires, if
# not used. This cannot be set to 0d.
#
# Every non-proxy hosts will be stored in cache (to avoid too many scans
# to the same host), so you should set this enough low to not fill your
# memory, especially on large networks.

ProxyCacheExpire 1d

# ProxyAkillReason <reason> [REQUIRED]
#
# Sets the reason that will be used to AKILL an user from the network
# if a proxy is detected.

ProxyAkillReason "You're using an insecure proxy. See http://proxy.myirc.net/config.html for information about how to config your proxy in a safe manner."

# WallProxy [OPTIONAL]
#
# Sends a WALLOPS/GLOBOPS when an user using an insecure proxy is being
# AKILLed.

WallProxy

# ProxyMax <number> [REQUIRED]
#
# Sets the maximum proxy cache entries that can be displayed in a single
# call to OperServ CACHE.

ProxyMax 50


Anope Version 1.7.8
-------------------
** ADDED    CONFIGURATION DIRECTIVES **

# UseTS6  [OPTIONAL]
#
# Modern hybrid ircd like Ratbox 2.0.x support a protocol called TS6. 
# However this protocol is optional thus our default support is for without 
# TS6, if you want to take advantage of TS6, enable this option.

#UseTS6

** MODIFIED CONFIGURATION DIRECTIVES **

** DELETED  CONFIGURATION DIRECTIVES ** 

Anope Version 1.7.7
-------------------
** ADDED    CONFIGURATION DIRECTIVES **

# NSAddAccessOnReg  [OPTIONAL]
#
# When enabled, services will add the usermask of registering users to the
# access list of their newly created account. If you disable this, users
# will always have to identify to nickserv before being recognized, unless
# they manually add an address to the access list of their account.

NSAddAccessOnReg

# UlineServers  [OPTIONAL]
#
# A list of ulined servers on your network, these servers are assumed they
# can set channel modes and we will not attempt to take them from them
# WARNING: do not put your user servers in this option

UlineServers "stats.your.network, proxy.your.network"

# KillOnSGline [OPTIONAL]
#
# When enabled, this option makes the services send an (SVS)KILL command
# immediately after SGLINE ADD. This eliminates the need of killing the 
# users after the SGLINE has been added.

# KillOnSGline

# KillOnSQline [OPTIONAL]
#
# When enabled, this option makes the services send an (SVS)KILL command
# immediately after SQLINE ADD. This eliminates the need of killing the 
# users after the SQLINE has been added.

# KillOnSQline

** MODIFIED CONFIGURATION DIRECTIVES **

** DELETED  CONFIGURATION DIRECTIVES ** 

# NetworkDomain <name> [OPTIONAL]
#
#     If your network has a common domain name, specify it there (for
#     example, all IRCZONE servers have a name ending in ".irczone.cl",
#     so "irczone.cl" would be set there.
#
#     You can specify more than one Network Domain by separating each one by
#     a space: NetworkDomain "localnet.net localnet.com"
#
#     Note that this directive is no longer used by the GLOBAL command, since
#     it uses a dynamic list of connected servers regardless of their
#     domains. However, some modules may still use this value, so you might
#     want to keep it just in case.

NetworkDomain "localnet.com"

# ListOpersOnly  [DEPRECATED]
#     When enabled, limits use of the ChanServ and NickServ LIST commands
#     to IRC operators.
#
#     This directive has been superseded by the NSListOpersOnly and
#     CSListOpersOnly directives.

#ListOpersOnly

Anope Version 1.7.6
-------------------
** ADDED    CONFIGURATION DIRECTIVES **

# UserKey1|2|3 <value> [REQUIRED]
#     
#     These keys are required to initiate the random number generator. These
#     numbers MUST be random as you want your passcodes to be random. Don't
#     give these keys to no anyone! Keep them private!

#UserKey1 9866235
#UserKey2 5216332
#UserKey3 9651291


# RestrictOperNick [OPTIONAL]
#     Forbids the registration of nicks that contain nick with services        
#     access. So if Tester is a Services Oper, for example, You can't 
#     register NewTester or Tester123 unless you are an IRC operator.
#RestrictOperNicks

# UseTokens [OPTIONAL]
#     Allows irc networks to use TOKEN commands instead of the 
#     standard commands. This saves bandwidth but can break older
#     modules that are not set to trap for TOKEN - if you are using
#     older modules do NOT use this option
#UseTokens

# UseSVS2MODE [OPTIONAL]
#     On Unreal IRCD use SVS2MODE instead of SVSMODE, doing this will
#     show services changing user modes.
#UseSVS2MODE

# NewsCount [OPTIONAL]
#     The number of LOGON/OPER News item to display when a user logs
#     on. The default value is 3
#NewsCount 3

# Numeric [OPTIONAL]
#     Many ircd identify themselves with a Numeric when using this option
#     consult your ircds documentation before using this
#Numeric 0

# UnRestrictSAdmin [OPTIONAL]
#     On many ircd Anope removes the umode of +a from users whom are not
#     Service Admin in Anope. This mode is NOT used by Anope for any form
#     of access. Thus this option allows them to keep the mode without having
#     to be a Service Admin in Anope
#UnRestrictSAdmin


** MODIFIED CONFIGURATION DIRECTIVES **
** DELETED  CONFIGURATION DIRECTIVES ** 

Anope Version 1.7.5
-------------------
** ADDED    CONFIGURATION DIRECTIVES **

# UseSVSHOLD [OPTIONAL]
#     Allows Bahamut-networks to use SVSHOLD instead of the services
#     enforcer. This option has been introduced in Bahamut 1.4.35 and
#     places a temporary Q:Line instead of introducing a new nick,
#     which is better for both CPU and bandwidth. If you enable this
#     option on a pre-1.4.35 Bahamut, it is most likely to break.
#UseSVSHOLD

** MODIFIED CONFIGURATION DIRECTIVES **

# NetworkDomain <name> [OPTIONAL]
#
#     If your network has a common domain name, specify it there (for
#     example, all IRCZONE servers have a name ending in ".irczone.cl",
#     so "irczone.cl" would be set there.
#
#     You can specify more than one Network Domain by separating each one by
#     a space: NetworkDomain "localnet.net localnet.com"
#
#     Note that this directive is no longer used by the GLOBAL command, since
#     it uses a dynamic list of connected servers regardless of their
#     domains. However, some modules may still use this value, so you might
#     want to keep it just in case.

NetworkDomain "localnet.com"

** DELETED  CONFIGURATION DIRECTIVES ** 

Anope Version 1.7.4
-------------------
** ADDED    CONFIGURATION DIRECTIVES **

# NSNickTracking  [OPTIONAL]
#
# When enabled, services will track your last nick identified when issuing
# nick changes.

#NSNickTracking

** MODIFIED CONFIGURATION DIRECTIVES **
** DELETED  CONFIGURATION DIRECTIVES ** 

Anope Version 1.7.3
-------------------
** ADDED    CONFIGURATION DIRECTIVES **

# BSCaseSensitive [OPTIONAL]
#    This option will make botserv use cAsE sEnSiTiVe checking for badwords

# BSCaseSensitive

# MSMemoReceipt    [OPTIONAL]
# Allow the use of memo receipts for the following groups:
# 1 - Opers Only
# 2 - Everybody
#
#MSMemoReceipt 1

Anope Version 1.7.2
--------------------
No Changes.

Anope Version 1.7.1
--------------------
** ADDED    CONFIGURATION DIRECTIVES **

# UseRDB [OPTIONAL]
# 
#    Enable this if you want anope to load its data from a remote database.
#    (e.g. MySQL)
#
#UseRDB

# NickRegDelay <seconds> [OPTIONAL]
#     Prevents users from regging their nick if they are not
#     connected for at least X seconds.         
#NickRegDelay 30

** MODIFIED CONFIGURATION DIRECTIVES **
** DELETED  CONFIGURATION DIRECTIVES **