anope/data/nickserv.example.conf

/*
 * Example configuration file for NickServ.
 */

/*
 * First, create the service.
 */
service
{
	/*
	 * The name of the NickServ client.
	 * If you change this value, you probably want to change the client directive in the configuration for the nickserv module too.
	 */
	nick = "NickServ"

	/*
	 * The username of the NickServ client.
	 */
	user = "services"

	/*
	 * The hostname of the NickServ client.
	 */
	host = "${services.host}"

	/*
	 * The realname of the NickServ client.
	 */
	real = "Nickname Registration Service"

	/*
	 * The modes this client should use.
	 * Do not modify this unless you know what you are doing.
	 *
	 * These modes are very IRCd specific. If left commented, sane defaults
	 * are used based on what protocol module you have loaded.
	 *
	 * Note that setting this option incorrectly could potentially BREAK some, if
	 * not all, usefulness of the client. We will not support you if this client is
	 * unable to do certain things if this option is enabled.
	 */
	#modes = "+o"

	/*
	 * An optional comma separated list of channels this service should join. Outside
	 * of log channels this is not very useful, as the service will just idle in the
	 * specified channels, and will not accept any types of commands.
	 *
	 * Prefixes may be given to the channels in the form of mode characters or prefix symbols.
	 */
	#channels = "@#services,#mychan"

	/*
	 * The server alias that can be used to securely message this service. If
	 * your IRC server does not have an alias for this service you can set this
	 * to an empty string to tell users to use /msg instead.
	 *
	 * This setting is ignored when options:servicealias is disabled.
	 *
	 * Defaults to the nick of the service if not set.
	 */
	#alias = "NS"
}

/*
 * Core NickServ module.
 *
 * Provides essential functionality for NickServ.
 */
module
{
	name = "nickserv"

	/*
	 * The name of the client that should be NickServ.
	 */
	client = "NickServ"

	/*
	 * Requires users to give an email address when they register a nick.
	 *
	 * This directive defaults to "yes" and is recommended to be enabled.
	 */
	forceemail = yes

	/*
	 * Require users who change their email address to confirm they
	 * own their new email.
	 *
	 * If {ns_register}:registration is set to mail then this defaults
	 * to yes. Otherwise, it defaults to no.
	 */
	#confirmemailchanges = yes

	/*
	 * A message sent to users on connect if they use an unregistered nick. {nick} will be replaced with the user's nickname.
	 *
	 * This directive is optional.
	 */
	#unregistered_notice = "Your nickname is not registered. To register it, use: /msg NickServ REGISTER password email"

	/*
	 * The default options for newly registered nicks. Note that changing these options
	 * will have no effect on nicks which are already registered. The list must be separated
	 * by spaces.
	 *
	 * The options are:
	 * -    ns_private: Hide the nick from NickServ's LIST command
	 * -    hide_email: Hide the nick's email address from NickServ's INFO command
	 * -     hide_mask: Hide the nick's last or current user@host from NickServ's INFO command
	 * -   hide_status: Hide the nick's services operator access status from NickServ's INFO command
	 * -     hide_quit: Hide the nick's last quit message from NickServ's INFO command
	 * -   memo_signon: Notify user if they have a new memo when they sign into the nick
	 * -  memo_receive: Notify user if they have a new memo as soon as it's received
	 * -     memo_mail: Notify user if they have a new memo by mail
	 * -        autoop: User will be automatically opped in channels they enter and have access to
	 * -       neverop: User can not be added to access lists
	 * -           msg: Messages will be sent as PRIVMSGs instead of NOTICEs
	 * - ns_keep_modes: Enables keepmodes, which retains user modes across sessions
	 * -       protect: Protects the registered nickname from use by unidentified users.
	 * -      ns_stats: Enable Chanstats for newly registered nicks
	 *
	 * This directive is optional, if left blank, the options will default to memo_signon, and
	 * memo_receive. If you really want no defaults, use "none" by itself as the option.
	 */
	defaults = "autoop hide_email hide_mask memo_receive memo_signon ns_private protect"

	/*
	 * The minimum length of time between consecutive uses of NickServ's REGISTER command. This
	 * directive is optional, but recommended. If not set, this restriction will be disabled.
	 */
	regdelay = 5m

	/*
	 * The length of time before a nick's registration expires.
	 *
	 * This directive is optional, but recommended. If not set, the default is one year.
	 */
	expire = 1y

	/*
	 * Prevents the use of the ACCESS and CERT (excluding their LIST subcommand), DROP, FORBID, SUSPEND
	 * and SET PASSWORD commands by services operators on other services operators.
	 *
	 * This directive is optional, but recommended.
	 */
	secureadmins = yes

	/*
	 * If set, Anope will set the channel modes a user has access to upon identifying, assuming
	 * they are not already set.
	 *
	 * This directive is optional.
	 */
	modeonid = yes

	/*
	 * If set, Anope will set these user modes on any user who identifies.
	 *
	 * This directive is optional.
	 */
	#modesonid = "+R"

	/*
	 * If set, Anope will not show netsplits in the last quit message field
	 * of NickServ's INFO command.
	 */
	hidenetsplitquit = yes

	/*
	 * The default period to force users to stop using a protected nickname after.
	 *
	 * Defaults to 1 minute.
	 */
	defaultprotect = 1m

	/*
	 * The minimum period that a user can have a user forced off their protected nickname after.
	 *
	 * Defaults to 10 seconds.
	 */
	minprotect = 10s

	/*
	 * The maximum period that a user can have a user forced off their protected nickname after.
	 *
	 * Defaults to 10 minutes.
	 */
	maxprotect = 10m

	/*
	 * If set, forbids the registration of nicks that contain an existing
	 * nick with services access. For example, if Tester is a Services Oper,
	 * you can't register NewTester or Tester123 unless you are an IRC
	 * Operator.
	 *
	 * NOTE: If you enable this, you will have to be logged in as an IRC
	 * operator in order to register a Services Root nick when setting up
	 * Anope for the first time.
	 *
	 * This directive is optional.
	 */
	#restrictopernicks = yes

	/*
	 * The username, hostname, and real name used for pseudoclients created when
	 * Anope needs to hold a nickname. This is only used if your IRCd does not
	 * support SVSHOLDs.
	 */
	enforceruser = "enforcer"
	enforcerhost = "${services.host}"
	enforcerreal = "Services Enforcer"

	/*
	 * The length of time Anope should hold nicknames for.
	 *
	 * This directive is optional, but recommended. If not set it defaults to 1 minute.
	 */
	releasetimeout = 1m

	/*
	 * When a user's nick is forcibly changed to enforce nickname protection their new
	 * nick will be based on this value. Any # in the value will be replaced with a random
	 * number. If your IRCd has support for unique identifiers you can also set this to an
	 * empty string to change a user's nick to their unique identifier.
	 *
	 * Make sure this is a valid nick and that it is is not longer than the maximum nick
	 * length on your IRCd.
	 *
	 * This directive is optional. If not set it defaults to "Guest####"
	 */
	guestnick = "Guest####"

	/*
	 * If set, Anope does not allow ownership of nick names, only ownership of accounts.
	 */
	nonicknameownership = no

	/*
	 * The minimum length of passwords
	 *
	 * This directive is optional. If not set it defaults to 10.
	 */
	minpasslen = 10

	/*
	 * The maximum length of passwords
	 *
	 * This directive is optional. If not set it defaults to 50.
	 */
	maxpasslen = 50

	/*
	 * Whether all of the secondary nicks of an account have to expire or be
	 * dropped before the display nick can expire or be dropped.
	 */
	preservedisplay = no
}

/*
 * Core NickServ commands.
 *
 * In Anope modules can provide (multiple) commands, each of which has a unique command name. Once these modules
 * are loaded you can then configure the commands to be added to any client you like with any name you like.
 *
 * Additionally, you may provide a permission name that must be in the opertype of users executing the command.
 *
 * Sane defaults are provided below that do not need to be edited unless you wish to change the default behavior.
 */

/* Command group configuration for NickServ.
 *
 * Commands may optionally be placed into groups to make NickServ's HELP output easier to understand.
 * Remove the following groups to use the old behavior of simply listing all NickServ commands from HELP.
 */
command_group
{
	name = "nickserv/admin"
	description = _("Services Operator commands")
}

/* Give it a help command. */
command { service = "NickServ"; name = "HELP"; command = "generic/help"; }

/*
 * ns_ajoin
 *
 * Provides the command nickserv/ajoin.
 *
 * Used for configuring channels to join once you identify.
 */
module
{
	name = "ns_ajoin"

	/*
	 * The maximum number of channels a user can have on NickServ's AJOIN command.
	 */
	ajoinmax = 10
}
command { service = "NickServ"; name = "AJOIN"; command = "nickserv/ajoin"; }

/*
 * ns_alist
 *
 * Provides the command nickserv/alist.
 *
 * Used for viewing what channels you have access to.
 */
module { name = "ns_alist" }
command { service = "NickServ"; name = "ALIST"; command = "nickserv/alist"; }
command { service = "NickServ"; name = "ACCESS"; command = "nickserv/alist"; hide = yes; }

/*
 * ns_cert
 *
 * Provides the command nickserv/cert.
 *
 * Used for configuring your SSL certificate list, which can be used to automatically identify you.
 */
module
{
	name = "ns_cert"

	/*
	* Should users who are connected with a SSL client certificate have its fingerprint be added to
	* their account when they register. Defaults to yes.
	*/
	automatic = yes

	/*
	 * The maximum number of entries allowed on a nickname's certificate fingerprint list.
	 * The default is 5. This number cannot be set to 0.
	 */
	max = 5
}
command { service = "NickServ"; name = "CERT"; command = "nickserv/cert"; }

/*
 * ns_confirm
 *
 * Provides the command nickserv/confirm.
 *
 * Used for confirming previous account actions.
 */
module { name = "ns_confirm" }
command { service = "NickServ"; name = "CONFIRM"; command = "nickserv/confirm"; }

/*
 * ns_drop
 *
 * Provides the command nickserv/drop.
 *
 * Used for unregistering names.
 */
module { name = "ns_drop" }
command { service = "NickServ"; name = "DROP"; command = "nickserv/drop"; }

/*
 * ns_email
 *
 * Provides various functionality relating to email addresses. This includes the
 * following commands:
 *
 * - nickserv/confirm/email: Used for confirming email changes.
 * - nickserv/getemail: Used for getting accounts by searching for emails.
 * - nickserv/set/email, nickserv/saset/email: Used for setting an account's
 *   emailvaddress.
 */
module
{
	name = "ns_email"

	/*
	 * The amount of time a user has after requesting a change of email address
	 * before it expires. Defaults to 1 day.
	 */
	#changeexpire = 1d

	/*
	 * The limit to how many registered accounts can use the same email address.
	 * If set to 0 or left commented there will be no limit enforced when
	 * registering new accounts or using /msg NickServ SET EMAIL.
	 */
	#maxemails = 1

	/*
	 * Whether to attempt to remove aliases when counting email addresses. This
	 * means removing dots (.) and anything after a plus (+) in the user part of
	 * the address, e.g. foo.bar+baz@example.com -> foobar@example.com.
	 */
	#remove_aliases = yes
}
command { service = "NickServ"; name = "CONFIRM EMAIL"; command = "nickserv/confirm/email"; }
command { service = "NickServ"; name = "GETEMAIL"; command = "nickserv/getemail"; permission = "nickserv/getemail"; group = "nickserv/admin"; }
command { service = "NickServ"; name = "SET EMAIL"; command = "nickserv/set/email"; }
command { service = "NickServ"; name = "SASET EMAIL"; command = "nickserv/saset/email"; permission = "nickserv/saset/email"; }

/*
 * ns_group
 *
 * Provides the commands:
 *   nickserv/group
 *   nickserv/ungroup
 *   nickserv/glist
 *   nickserv/saset/display
 *   nickserv/set/display
 *
 * Used for controlling grouped nicknames.
 */
module
{
	name = "ns_group"

	/*
	 * The maximum number of nicks allowed in a group.
	 *
	 * This directive is optional, but recommended. If not set or set to 0, no limits will be applied.
	 */
	maxaliases = 10

	/*
	 * If set, the NickServ GROUP command won't allow any group changes. This is recommended to
	 * prevent users from accidentally dropping their nicks, as it forces users to explicitly
	 * drop their nicks before adding it to another group.
	 *
	 * This directive is optional, but recommended.
	 */
	nogroupchange = yes
}
command { service = "NickServ"; name = "GLIST"; command = "nickserv/glist"; }
command { service = "NickServ"; name = "GROUP"; command = "nickserv/group"; }
command { service = "NickServ"; name = "UNGROUP"; command = "nickserv/ungroup"; }
command { service = "NickServ"; name = "SET DISPLAY"; command = "nickserv/set/display"; }
command { service = "NickServ"; name = "SASET DISPLAY"; command = "nickserv/saset/display"; permission = "nickserv/saset/display"; }

# For compatibility with Atheme.
command { service = "NickServ"; name = "SET ACCOUNTNAME"; command = "nickserv/set/display"; hide = yes; }
command { service = "NickServ"; name = "SASET ACCOUNTNAME"; command = "nickserv/saset/display"; permission = "nickserv/saset/display"; hide = yes; }

/*
 * ns_identify
 *
 * Provides the command nickserv/identify.
 *
 * Used for identifying to accounts.
 */
module
{
	name = "ns_identify"

	/*
	 * If set, limits the number of concurrent users that can be logged in as a given account at once.
	 */
	maxlogins = 10
}
command { service = "NickServ"; name = "ID"; command = "nickserv/identify"; hide = yes; }
command { service = "NickServ"; name = "IDENTIFY"; command = "nickserv/identify"; }

/*
 * ns_info
 *
 * Provides the commands:
 * nickserv/info. - Used for gathering information about an account.
 * nickserv/set/hide, nickserv/saset/hide - Used for configuring which options are publicly shown in nickserv/info.
 *
 */
module { name = "ns_info" }
command { service = "NickServ"; name = "INFO"; command = "nickserv/info"; }

command { service = "NickServ"; name = "SET HIDE"; command = "nickserv/set/hide"; }
command { service = "NickServ"; name = "SASET HIDE"; command = "nickserv/saset/hide"; permission = "nickserv/saset/hide"; }

/*
 * ns_list
 *
 * Provides the commands:
 *   nickserv/list - Used for retrieving and searching the registered account list.
 *   nickserv/set/private, nickserv/saset/private - Used for configuring whether or a users account shows up in nickserv/list.
 *
 */
module
{
	name = "ns_list"

	/*
	 * The maximum number of nicks to be returned for a NickServ LIST command.
	 */
	listmax = 50
}
command { service = "NickServ"; name = "LIST"; command = "nickserv/list"; }
command { service = "NickServ"; name = "SET PRIVATE"; command = "nickserv/set/private"; }
command { service = "NickServ"; name = "SASET PRIVATE"; command = "nickserv/saset/private"; permission = "nickserv/saset/private"; }

/*
 * ns_logout
 *
 * Provides the command nickserv/logout.
 *
 * Used for logging out of your account.
 */
module { name = "ns_logout" }
command { service = "NickServ"; name = "LOGOUT"; command = "nickserv/logout"; }

/*
 * ns_recover
 *
 * Provides the command nickserv/recover.
 *
 * Used for recovering your nick from services or another user.
 */
module
{
	name = "ns_recover"

	/*
	 * If set, Anope will svsnick and svsjoin users who use the recover
	 * command on an identified user to the nick and channels of the recovered user.
	 *
	 * This directive is optional.
	 */
	restoreonrecover = yes
}
command { service = "NickServ"; name = "RECOVER"; command = "nickserv/recover"; }

# For compatibility with Anope 1.8 and Atheme.
command { service = "NickServ"; name = "GHOST"; command = "nickserv/recover"; hide = yes; }
command { service = "NickServ"; name = "RELEASE"; command = "nickserv/recover"; hide = yes; }

/*
 * ns_register
 *
 * Provides the commands nickserv/confirm/register, nickserv/register, and nickserv/resend.
 *
 * Used for registering accounts.
 */
module
{
	name = "ns_register"

	/*
	 * The method for confirming account registrations. Possible values are:
	 *
	 * "admin" to require confirmation by a Services Operator.
	 * "code" to require confirmation with a code provided via IRC.
	 * "disable" to disable account registration.
	 * "mail" to require confirmation with a code provided via email.
	 * "none" to automatically confirm (this is the default).
	 */
	registration = "code"

	/*
	 * The minimum length of time between consecutive uses of NickServ's RESEND command.
	 *
	 * This directive is optional, but recommended. If not set, this restriction will be disabled.
	 */
	resenddelay = 90s

	/*
	 * Prevents users from registering their nick if they are not connected
	 * for at least the given number of seconds.
	 *
	 * This directive is optional.
	 */
	#nickregdelay = 1m

	/*
	 * The length of time a user using an unconfirmed account has
	 * before the account will be released for general use again.
	 */
	#unconfirmedexpire = 1d
}
command { service = "NickServ"; name = "CONFIRM REGISTER"; command = "nickserv/confirm/register"; }
command { service = "NickServ"; name = "REGISTER"; command = "nickserv/register"; }
command { service = "NickServ"; name = "RESEND"; command = "nickserv/resend"; }

/*
 * ns_resetpass
 *
 * Provides the command nickserv/confirm/resetpass and nickserv/resetpass.
 *
 * Used for resetting passwords by emailing users a temporary one.
 */
module
{
	name = "ns_resetpass"

	/*
	 * The amount of time a user has after requesting a password reset before it
	 * expires. Defaults to 1 day.
	 */
	#resetexpire = 1d
}
command { service = "NickServ"; name = "CONFIRM RESETPASS"; command = "nickserv/confirm/resetpass"; }
command { service = "NickServ"; name = "RESETPASS"; command = "nickserv/resetpass"; }

# For compatibility with Anope 2.0.
command { service = "NickServ"; name = "GETPASS"; command = "nickserv/resetpass"; hide = yes; }

/*
 * ns_sasl
 *
 * Provides support for authentication to services via IRCv3 SASL. This is a standardised
 * alternative to ns_identify that is supported by several IRCds.
 *
 * You will need to configure your IRCd to use SASL. See the following links for details:
 *
 * InspIRCd: https://docs.inspircd.org/4/modules/sasl/
 * UnrealIRCd: https://www.unrealircd.org/docs/SASL#Enabling_SASL_on_the_server
 */
module
{
	name = "ns_sasl"

	/*
	 * The nick of the client which operates as the SASL agent.
	 */
	#agent = "NickServ"

	/*
	 * Sets the number of invalid SASL authentication attempts before services
	 * removes a partially-connected user from the network. If not defined then
	 * the value specified in options:badpasslimit will be used instead.
	 */
	#badpasslimit = 1

	/*
	 * Sets the time after which invalid SASL authentication attempts are
	 * forgotten about. If a user does not fail to authenticate in this amount
	 * of time, the incorrect password count will reset to zero. If not defined
	 * then the value specified in options:badpasstimeout will be used instead.
	 */
	#badpasstimeout = 15m
}

/*
 * ns_sasl_anonymous, ns_sasl_external, ns_sasl_plain
 *
 * Provides support for the following SASL mechanisms:
 *
 * ns_sasl_anonymous: Adds the ANONYMOUS mechanism which allows logging out of
 *                    an account. See RFC 4505 for more details.
 * ns_sasl_external:  Adds the EXTERNAL mechanism which allows logging into an
                      account using a TLS client certificate. See RFC 4422 for
                      for more details.
 * ns_sasl_plain:     Adds the PLAIN mechanism which allows logging in to an
                      account using a plain text username and password. See RFC
                      4422 for more details.
 */
module { name = "ns_sasl_anonymous" }
module { name = "ns_sasl_external" }
module { name = "ns_sasl_plain" }

/*
 * ns_set
 *
 * Provides the commands:
 *   nickserv/set, nickserv/saset - Dummy help wrappers for the SET and SASET commands.
 *   nickserv/saset/noexpire - Used for configuring noexpire, which prevents nicks from expiring.
 *   nickserv/set/password, nickserv/saset/password  - Used for changing a users password.
 */
module { name = "ns_set" }

command { service = "NickServ"; name = "SET"; command = "nickserv/set"; }
command { service = "NickServ"; name = "SASET"; command = "nickserv/saset"; permission = "nickserv/saset/"; group = "nickserv/admin"; }

command { service = "NickServ"; name = "SET PASSWORD"; command = "nickserv/set/password"; }
command { service = "NickServ"; name = "SASET PASSWORD"; command = "nickserv/saset/password"; permission = "nickserv/saset/password"; }

command { service = "NickServ"; name = "SASET NOEXPIRE"; command = "nickserv/saset/noexpire"; permission = "nickserv/saset/noexpire"; }

/*
 * ns_set_keepmodes
 *
 * Provides the command nickserv/set/keepmodes and nickserv/saset/keepmodes.
 *
 * Allows configuring services to keep user modes across logins.
 */
module
{
	name = "ns_set_keepmodes"

	/*
	 * Anope will try to not restore user modes that aren't settable by users. However, if
	 * you have modes that you don't want to be automatically restored you can list them
	 * here.
	 */
	#norestore = "ABCabc"
}
command { service = "NickServ"; name = "SET KEEPMODES"; command = "nickserv/set/keepmodes"; }
command { service = "NickServ"; name = "SASET KEEPMODES"; command = "nickserv/saset/keepmodes"; permission = "nickserv/saset/keepmodes"; }

/*
 * ns_set_language
 *
 * Provides the command nickserv/set/language and nickserv/saset/language.
 *
 * Allows configuring the language that services uses.
 */
module { name = "ns_set_language" }
command { service = "NickServ"; name = "SET LANGUAGE"; command = "nickserv/set/language"; }
command { service = "NickServ"; name = "SASET LANGUAGE"; command = "nickserv/saset/language"; permission = "nickserv/saset/language"; }

/*
 * ns_set_layout
 *
 * Provides the command nickserv/set/layout and nickserv/saset/layout.
 *
 * Allows configuring the layout that services uses.
 */
module { name = "ns_set_layout" }
command { service = "NickServ"; name = "SET LAYOUT"; command = "nickserv/set/layout"; }
command { service = "NickServ"; name = "SASET LAYOUT"; command = "nickserv/saset/layout"; permission = "nickserv/saset/layout"; }

/*
 * ns_set_message
 *
 * Provides the commands nickserv/set/message and nickserv/saset/message.
 *
 * Allows users to let services send them PRIVMSGs instead of NOTICEs.
 *
 * This might cause problems with badly written clients as the IRC RFC
 * requires that automatic responses to a PRIVMSG use a NOTICE to avoid
 * message loops. Only enable this if you are sure this can not happen.
 */
#module { name = "ns_set_message" }
#command { service = "NickServ"; name = "SET MESSAGE"; command = "nickserv/set/message"; }
#command { service = "NickServ"; name = "SASET MESSAGE"; command = "nickserv/saset/message"; permission = "nickserv/saset/message"; }

/*
 * ns_set_misc
 *
 * Provides the command nickserv/set/misc.
 *
 * Allows you to create arbitrary commands to set data, and have that data show up in nickserv/info.
 * A field named misc_description may be given for use with help output.
 */
module { name = "ns_set_misc" }
command { service = "NickServ"; name = "SET URL"; command = "nickserv/set/misc"; misc_description = _("Associate a URL with your account"); }
command { service = "NickServ"; name = "SASET URL"; command = "nickserv/saset/misc"; misc_description = _("Associate a URL with this account"); permission = "nickserv/saset/url"; group = "nickserv/admin"; }
#command { service = "NickServ"; name = "SET MASTODON"; command = "nickserv/set/misc"; misc_description = _("Associate a Mastodon account with your account"); }
#command { service = "NickServ"; name = "SASET MASTODON"; command = "nickserv/saset/misc"; misc_description = _("Associate a Mastodon account with this account"); permission = "nickserv/saset/mastodon"; group = "nickserv/admin"; }
#command { service = "NickServ"; name = "SET LOCATION"; command = "nickserv/set/misc"; misc_description = _("Associate a location with your account"); }
#command { service = "NickServ"; name = "SASET LOCATION"; command = "nickserv/saset/misc"; misc_description = _("Associate a location with this account"); permission = "nickserv/saset/location"; group = "nickserv/admin"; }

/*
 * ns_set_op
 *
 * Provides the commands:
 *   nickserv/set/autoop, nickserv/saset/autoop - Allows configuring whether status modes are automatically granted when joining a channel.
 *   nickserv/set/neverop, nickserv/saset/neverop - Allows configuring whether a user can be added to access lists.
 */
module { name = "ns_set_op" }

command { service = "NickServ"; name = "SET AUTOOP"; command = "nickserv/set/autoop"; }
command { service = "NickServ"; name = "SASET AUTOOP"; command = "nickserv/saset/autoop"; permission = "nickserv/saset/autoop"; }

command { service = "NickServ"; name = "SET NEVEROP"; command = "nickserv/set/neverop"; }
command { service = "NickServ"; name = "SASET NEVEROP"; command = "nickserv/saset/neverop"; permission = "nickserv/saset/neverop"; }

# For compatibility with DALnet Services.
command { service = "NickServ"; name = "SET NOOP"; command = "nickserv/set/neverop"; hide = yes; }
command { service = "NickServ"; name = "SASET NOOP"; command = "nickserv/saset/neverop"; permission = "nickserv/saset/neverop"; hide = yes; }

/*
 * ns_set_protect
 *
 * Provides the commands nickserv/set/protect and nickserv/saset/protect.
 *
 * Used for configuring nickname protection.
 */
module { name = "ns_set_protect" }
command { service = "NickServ"; name = "SET PROTECT"; command = "nickserv/set/protect"; }
command { service = "NickServ"; name = "SASET PROTECT"; command = "nickserv/saset/protect"; permission = "nickserv/saset/protect"; }

# For compatibility with Anope 2.0.
command { service = "NickServ"; name = "SET KILL"; command = "nickserv/set/protect"; hide = yes; }
command { service = "NickServ"; name = "SASET KILL"; command = "nickserv/saset/protect"; permission = "nickserv/saset/protect"; hide = yes; }

/*
 * ns_set_timezone
 *
 * Provides the command nickserv/set/timezone and nickserv/saset/timezone.
 *
 * Allows configuring the timezone that services uses.
 */
module { name = "ns_set_timezone" }
command { service = "NickServ"; name = "SET TIMEZONE"; command = "nickserv/set/timezone"; }
command { service = "NickServ"; name = "SASET TIMEZONE"; command = "nickserv/saset/timezone"; permission = "nickserv/saset/timezone"; }

/*
 * ns_suspend
 *
 * Provides the commands nickserv/suspend and nickserv/unsuspend.
 *
 * Used to suspend and unsuspend nicknames. Suspended nicknames can not be used but their settings are preserved.
 */
module
{
	name = "ns_suspend"

	/*
	 * The length of time before a suspended nick becomes unsuspended.
	 *
	 * This directive is optional. If not set, the default is never.
	 */
	#suspendexpire = 90d

	/*
	 * Settings to show to non-opers in NickServ's INFO output.
	 * Comment to completely disable showing any information about
	 * suspended nicknames to non-opers.
	 */
	show = "suspended, by, reason, on, expires"
}
command { service = "NickServ"; name = "SUSPEND"; command = "nickserv/suspend"; permission = "nickserv/suspend"; group = "nickserv/admin"; }
command { service = "NickServ"; name = "UNSUSPEND"; command = "nickserv/unsuspend"; permission = "nickserv/suspend"; group = "nickserv/admin"; }

/*
 * ns_update
 *
 * Provides the command nickserv/update.
 *
 * Used to update your status on all channels, turn on your vhost, etc.
 */
module { name = "ns_update" }
command { service = "NickServ"; name = "UPDATE"; command = "nickserv/update"; }