Instead, run check_tkls() when TKL changes are made directly.
While this is technically slower when more than one TKL is placed
at once, the value of getting it out of the check_pings event is
greater.
This is partially for the sake of Stskeeps, even though he left the
project long ago, but mainly so we can work towards dynamic ticks in
the event loop while guaranteeing latencies for connected clients,
even with fakelag.
- Remote MOTD support. Not adequately tested. Required restructuring of the asynchronous download callback and handler.
- Added some consts throughout url.c, etc.
- Fix segfault where the an include directive specifies a URL and cURL follows redirects, resulting in a different resultant URL. The remote includes code would look for the an include block using the resultant URL and assume that it would be found. The new code searches differently, has new checks, and ignores the resultant URL.
- Removed duplicated m_motd() and friends that were both in modules and s_serv.c. The copies in s_serv.c (core) were overriding the in-module functions.
descriptors. Because of this, Unreal did not restart properly as you would
get an "Address already in use" error. This only seemed to happen when
logging to syslog.
- Fixed a similar issue with syslog (and debugmode) and closing fd's as well:
the first port we listened on would not open up, ircd did not log any error.
load (for example when the webserver is down), then the most recent
version of that remote include will be used, and the ircd will still boot
and be able to rehash. Even though this is quite a simple feature, it
can make a key difference when deciding to roll out remote includes on
your network. Previously, servers would be unable to boot or rehash when
the webserver was down, which would be a big problem (often unacceptable).
The latest version of fetched urls are cached in the cache/ directory as
cache/<md5 hash of url>.
Obviously, if there's no 'latest version' and an url fails, the ircd will
still not be able to boot. This would be the case if you added or changed
the path of a remote include and it's trying to fetch it for the first time.
To disable this new behavior, check out REMOTEINC_SPECIALCACHE in
include/config.h.
timesynch) made autoconnect not work for the duration of the offset
(eg: -60 would make autoconnect wait 60 seconds after boot, instead of
autoconnecting almost immediately). Reported by aragon (#0003853).
In the IRCd world correct time is very important. This means that time
should be correct when the IRCd is booted, either by running ntpd/ntpdate
on the system or some other synchronization software, or by using the
built-in timesync feature.
Whenever the clock is adjusted for more than a few seconds AFTER the IRCd
has booted, it can lead to dangerous effects ranging from unfair
timestamps
for nicks and channels (and hence the possibility to takeover channels),
to even completely stalling the IRCd (negative timeshift) or making it so
nobody can connect anymore due to throttling (positive timeshift).
We now try to 'fix' the worst effects such as the IRCd freeze and
throttling. This does not fix the whole problem, so I've added some big
warnings when the clock is adjusted, including an annoying one every 5
minutes if the clock was set backwards, until the time is OK again
(catches up with the original time).
This fixes#0003230 reported by Stealth, and #0002521 reported by durrie.
set::spamfilter::slowdetect-fatal, set::ssl::server-cipher-list,
set::ssl::renegotiate-bytes, set::ssl::renegotiate-timeout,
set::watch-away-notification and ./unreal gencloak. Reported by Bock
(#0003764).
- set::ssl::renegotiate-bytes: fix when specifying a value such as 10m.
- './unreal gencloak' now actually works
- Fix typo in user mode q notice, reported by Strawberry_Kittens and others
(#0003761).
- Possible fix for MAC OS X compile problem - UNCONFIRMED.
trying to read unrealircd.conf. All due to strange chmod() behavior. We now no
longer try to set permissions on Mac OS X. Patch provided by Tibby (#3489).
defines IRC_USER, IRC_GROUP which is a string specifiying what user name/
group name that should be changed into, instead of a hardcoded gid/uid.
This should make it easier for packaged binary releases to work (even
though this probably means Debian will take us in, ick .. Can't we pull
a new fight with debian-legal again?)
- #0003363 patched by adrianp, changing IRC_UID and IRC_GID into
defines IRC_USER, IRC_GROUP which is a string specifiying what user name/
group name that should be changed into, instead of a hardcoded gid/uid.
This should make it easier for packaged binary releases to work (even
though this probably means Debian will take us in, ick .. Can't we pull
a new fight with debian-legal again?)
error, reported by Bock (#0003114).
- Added information about extbans to help.conf (/HELPOP ?EXTBANS). Patch from Bock
(#0003113).
- Made SAPART work for mulitple channels, just like SAJOIN. Patch provided by Bock
(#0003064). This also fixes SAPART now being announced to all opers globally, just
like SAJOIN.
- Finally fixed /RESTART issue on windows for good, should now always restart correctly.
Patch provided by BuHHunyx and Bock (#0002734).
synchronize the IRCd clock (TSOffset) with a few good time servers. It currently only does
this on-boot, but it will hopefully help a lot of people with most of their time differences.
I still keep recommending anyone who can to run proper time-synchronization software such as
ntpd/ntpdate on their servers.
To disable time synchronization (eg: because you are already running ntp), you can simply
set set::timesynch::enabled to no.
The boot timeout for the timeserver response (=causes boot delay) can be configured via
set::timesynch::timeout and is set to 3 seconds by default (range is 1s-5s), there should
be no reason to change this.
The time server can be configured by setting set::timesynch::server, the default is to
use 3 time servers on 3 continents (US, EU, AU) which should be sufficient for anyone but
if you got a good one near you you can use that one instead.
The time protocol we use is (S)NTP v4.
- '/quote dns i' now shows the nameserver settings (which is taken from /etc/resolv.conf
on *NIX, and from the registry on Windows)
- We no longer depend on a C++ compiler (was useless c-ares dependency caused by libtool)
- '/REHASH -dns' now rereads the resolver data from resolv.conf/registry, no IRCd restart
needed anymore. It's currently kinda experimental however, but I *think* it will work ok.
Unfortunately the above features required some ugly hacks if curl was enabled, so if you
use curl (Remote includes), feel free to test on your OS (Linux, but especially FreeBSD
and the other *NIXes) to see if things still compile (make clean; ./Config && make).
- Redid some net synching code to make it more efficient (#2716).
- Fixed spamfilter crash problem: the action 'viruschan' is now no longer incompatible
with target 'user'. Reported by Monk (#0002570).
William Pitcock