This makes websocket_common unload last (and near-last: rpc & websocket)
and makes us call Mod_Init for these three modules first.
This way, the period where the websocket handler is unavailable is kept
to a minimum.
This also renames the ModuleSetOptions option MOD_OPT_UNLOAD_PRIORITY
to MOD_OPT_PRIORITY since it dynamically changes the module priority
in the list. For 6.x compatibility, MOD_OPT_UNLOAD_PRIORITY can still
be used.
This was caused by the transition from letter extbans (eg ~a) to
named extbans (eg ~account) and a combination of the bug fix in 6.0.2
(60a70acd86) and the 'channeldb' module
not checking for duplicates while reading the database.
Reported by PeGaSuS in https://bugs.unrealircd.org/view.php?id=6091
using mixed UnrealIRCd 5 and UnrealIRCd 6 networks.
This is a slightly complex rewrite of make_mode_str() and do_mode(),
as we nog go from single mode lines to potentially multiple mode lines.
In short: whenever we would be near buffer cut-off point (the famous
512 byte limit) then previously we would prevent the mode, though not
succesfully in all cases where a network consists of mixed 5.x and 6.x.
From this point onward we no longer do that. Instead we convert one
MODE command to two MODE lines if that is needed.
The benefit of this is that we no longer prevent it BEFORE processing
the MODE, which is a flawed method and could be wrong (causing desyncs).
And also, we no longer partially ignore MODE lines from clients when
they would cause the limit to be exceeded, as we replace them with
two MODE lines instead.
These are more changes than I wanted at such a late point but.. they seem
to be necessary to prevent U5-U6 compatibility issues.
It's usage would be rare, but this is f.e. used from channeldb.
Other uses may be in some 3rd party module.
Example: set_channel_mode(channel, "+k", "key")
It means you can no longer modify eg parv[1] in-place with strtoken and such.
The main reason for this is that as a command handler you have no idea
where the arguments may come from. It could be from a do_cmd() with
read-only storage (eg a string literal) and so on.
It started with an experiment of how far I could get and how annoying the
side-effects would be, but they seem to be quite managable, so I'm
committing this stuff.
Hopefully this catches/solves some stupid bugs somewhere :)
* New macro IsInvalidChannelTS() which evaluates to ts < 750000
* Check for faulty creation time ("fishy timestamp") at ALL places
where channel->creationtime is set.
* Also, important, changed behavior:
if !IsInvalidChannelTS then:
1) We print our warning
2) We pretend ts is our channel creationtime (which may be
TStime() if the channel did not previously exist)
3) We allow the command through and allow it to merge (in case of SJOIN)
This makes it so we still log the error (noisy) but on the other hand
we won't get "infected" by fishy timestamps since we will never set
them, no matter what happens.
Also rename them to describe better what they do.
ConfigFile:
cf_filename -> filename
cf_next -> next
cf_entries -> items
ConfigEntry:
ce_fileptr -> file
ce_varlinenum -> line_number
ce_fileposstart -> file_position_start
ce_fileposend -> file_position_end
ce_sectlinenum -> section_linenumber
ce_varname -> name
ce_vardata -> value
ce_cond -> conditional_config
ce_entries -> items
ce_next -> next
ce_prevlevel -> parent
Also add doxygen docs for both structs.
change some more calls to make_channel() to use find_channel().
Also make it take 1 argument instead of 3.
Needed to be careful in sjoin code since the previous code set
channel->creationtime to 0 if client was a remote. Now merged
a few if's into one. Should be correct :D.
They were already ignored in MODE by remote UnrealIRCd servers,
but this makes it so local modes (+Z and +d at the moment)
are not sent across the wire.
This also changes the channel_modes() function to have an additional
'hide_local_modes' argument. Set this to 1 if you are building a
buffer that will be sent to remote servers, otherwise use 0,
which is far more common.
Also, this will skip saving of local channel modes to channeldb
since all of these are temporary, or at the moment anyway.
Thanks to alice for reporting this bug and providing a good test
case to help fix this issue and the previous ones.
* Fix channel history issues with writing on terminate
* Change tkldb and reputation to only write the db
on terminate and not on every REHASH anymore
..all this thanks to the new loop.ircd_terminating, so modules can
see the difference between regular rehash and terminating.
if running multiple ircds from the same directory you sometimes get
weird messages otherwise (not that we really support such a thing
but i use it while dev'ing).
any parameter channel mode module loaded after channeldb.
Reported by GaMbiTo, with help from PeGaSuS, Gottem and k4be
in https://bugs.unrealircd.org/view.php?id=5669
It is not safe to call channel mode parameter functions when
unloading modules. Makes sense I think.
We now no longer write the db on rehash, which is something i
didn't like anyway (wasted CPU cycles). The problem was that
one could not just scratch the write db call, as otherwise if
someone rehashes every minute would cause the db never to
be saved. This is because on each rehash the event to write
the db gets rescheduled to +5 minutes in the future.
We now work around that in the same way as connthrottle does.
Obviously it would be better to make the event system itself
deal with this, but that is (way) too much for now.
'sptr' is sufficient and in most cases the only one you should care about.
Should you need it, you can access sptr->direction in cases where you
need the old information (usually only for some sendto_* functions
and some protoctl checks), so 'cptr' was redundant too.
[!] This change likely introduces some bugs. This was many hours of work.
I only cut some corners in 4 functions, which will be fixed at a later
stage..... yes, more major changes to come.
On the plus side, I likely fixed some bugs in the process. Situations
where cptr vs sptr usage was incorrect. Eg using cptr->name (near server)
when sptr->name should be used (the actual source server), etc....
which specifies the time in milliseconds rather than seconds. This
allows for additional precision, or at least multiple calls per second.
The minimum allowed every_msec value is 100 at this time.
The prototype is now: EventAdd(Module *module, char *name,
vFP event, void *data, long every_msec, int count);
MOD_UNLOAD. And MOD_HEADER(xyz) is now MOD_HEADER even without ()
since this isn't a function, really.
To make things understandable I added the following to the
developer section of the release notes:
* The module header is now as follows:
ModuleHeader MOD_HEADER
= {
"nameofmodule",
"5.0",
"Some description",
"Name of Author",
"unrealircd-5",
};
There's a new author field, the version must start with a digit,
and also the name of the module must match the loadmodule name.
So for example third/funmod must also be named third/funmod.
* The MOD_TEST, MOD_INIT, MOD_LOAD and MOD_UNLOAD functions no longer
take a name argument. So: MOD_INIT(mymod) is now MOD_INIT()
aChannel to Channel, and some more. Third party module coders will
love this. But.. it makes things more logical and the doxygen output
will look more clean and logical as well.
(More changes will follow)
src/modules/tkl.c is the main one).
Also move DB writing/reading functions to src/misc.c so they can be
removed out of channeldb and tkldb.
Important note to current tkldb users:
Unfortunately due to the major cleanup I had to remove upgrading
for previously saved tkl db files. That seemed not worth the effort
for maybe <15 current users or so. It also makes the tkldb code
a lot more cleaner. Otherwise it would be a huge mess.
Currently a FIXME item: spamfilter support in RMTKL.
and remove old dependency field (never used, was always NULL,
broken since 3.2.x)
I'll add some constraints later on things like names and versions.
IOTW: more changes to follow, don't mass update your own mods yet.
Bram Matthys