#/************************************************************************
#*   IRC - Internet Relay Chat, Makefile
#*   Copyright (C) 1990, Jarkko Oikarinen
#*
#*   This program is free software; you can redistribute it and/or modify
#*   it under the terms of the GNU General Public License as published by
#*   the Free Software Foundation; either version 1, or (at your option)
#*   any later version.
#*
#*   This program is distributed in the hope that it will be useful,
#*   but WITHOUT ANY WARRANTY; without even the implied warranty of
#*   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#*   GNU General Public License for more details.
#*
#*   You should have received a copy of the GNU General Public License
#*   along with this program; if not, write to the Free Software
#*   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#*  
#*   $Id$
#*/

CC=gcc
INCLUDEDIR=../include
NETWORKSDIR=
FROMDOS=/home/cmunk/bin/4dos
# [CHANGEME]
# Default flags:
# Change XCFLAGS if you don't like what Config puts there.  Same with
# IRCDLIBS.
#
# If you are configuring by hand, try "-O -g" for XCFLAGS, and leave
# IRCDLIBS blank.  If that fails, try recomendations below.
#
XCFLAGS=
IRCDLIBS=

#
# use the following on MIPS:
#CFLAGS= -systype bsd43 -DSYSTYPE_BSD43 -I$(INCLUDEDIR)
# For Irix 4.x (SGI), use the following:
#CFLAGS= -g -cckr -I$(INCLUDEDIR)
#
# on NEXT use:
#CFLAGS=-bsd -I$(INCLUDEDIR)
#on NeXT other than 2.0:
#IRCDLIBS=-lsys_s
#
# AIX 370 flags
#CFLAGS=-D_BSD -Hxa -I$(INCLUDEDIR)
#IRCDLIBS=-lbsd
#
# Dynix/ptx V2.0.x
#CFLAGS= -I$(INCLUDEDIR) -O -Xo
#IRCDLIBS= -lsocket -linet -lnsl -lseq
# 
# Dynix/ptx V1.x.x
#IRCDLIBS= -lsocket -linet -lnsl -lseq
#
#use the following on SUN OS without nameserver libraries inside libc
#IRCDLIBS=-lresolv
#
# Solaris 2
#IRCDLIBS=-lsocket -lnsl -lresolv -L/usr/ucblib -R/usr/ucblib -lgen
#
# ESIX
#CFLAGS=-O -I$(INCLUDEDIR) -I/usr/ucbinclude
#IRCDLIBS=-L/usr/ucblib -L/usr/lib -lsocket -lucb -lns -lnsl
#
# LDFLAGS - flags to send the loader (ld). SunOS users may want to add
# -Bstatic here.
#
#LDFLAGS=-Bstatic
#
#Dell SVR4
#CC=gcc
#CFLAGS= -I$(INCLUDEDIR) -O2
#IRCDLIBS=-lsocket -lnsl -lucb

# [CHANGEME]
# IRCDMODE is the mode you want the binary to be.
# The 4 at the front is important (allows for setuidness)
#
# WARNING: if you are making ircd SUID or SGID, check config.h to make sure
#          you are not defining CMDLINE_CONFIG 
IRCDMODE = 711

# [CHANGEME]
# IRCDDIR must be the same as DPATH in include/config.h
#
IRCDDIR=/usr/local/lib/ircd

# [CHANGEME]
# Some SunOS versions want this.  Try it without first.
#RES=res_init.o res_comp.o res_mkquery.o
# BSDI systems want this.
#RES=res_skipname.o
# The rest are perfectly content with this.
RES=

# [CHANGEME]
# If you get a compile-time error dealing with u_int32_t, comment out
# this line.
# NEED_U_INT32_T=	-DNEED_U_INT32_T
NEED_U_INT32_T=

# [CHANGEME]
# If you get a link-time error dealing with strtoul, comment out
# this line.
# STRTOUL=	strtoul.o
STRTOUL=

# [CHANGEME]
# If you get crashes around a specific number of clients, and that client
# load comes close or a little over the system-defined value of FD_SETSIZE,
# override it here and see what happens.
FD_SETSIZE=

CFLAGS=-I$(INCLUDEDIR) $(XCFLAGS) $(NEED_U_INT32_T) $(FD_SETSIZE)

SHELL=/bin/sh
SUBDIRS=src
BINDIR=$(IRCDDIR)
MANDIR=/usr/local/man
INSTALL=/usr/bin/install
RM=rm
CP=cp
TOUCH=touch

all:	build

MAKEARGS =	'CFLAGS=${CFLAGS}' 'CC=${CC}' 'IRCDLIBS=${IRCDLIBS}' \
		'LDFLAGS=${LDFLAGS}' 'IRCDMODE=${IRCDMODE}' \
		'BINDIR=${BINDIR}' 'INSTALL=${INSTALL}' \
		'INCLUDEDIR=${INCLUDEDIR}' 'IRCDDIR=${IRCDDIR}' \
		'MANDIR=${MANDIR}' 'RM=${RM}' 'CP=${CP}' 'TOUCH=${TOUCH}' \
		'RES=${RES}' 'SHELL=${SHELL}' 'STRTOUL=${STRTOUL}'

server:
build:
	-@if [ ! -f include/setup.h ] ; then \
		echo "Hmm...doesn't look like you've run Config..."; \
		echo "Doing so now."; \
		sh Config; \
	fi
	@for i in $(SUBDIRS); do \
		echo "Building $$i";\
		( cd $$i; ${MAKE} ${MAKEARGS} build; ) \
	done
	@echo ' __________________________________________________ '
	@echo '| Compile is now complete. Now you have to go do   |'
	@echo '| The load-time configuration - try go read the    |'
	@echo '| file "dynconf" using your favourite viewer or    |'
	@echo '| editor. The file will contain instructions on how|'
	@echo '| to do the dynamic configuration :)               |'
	@echo '|                                                  |'
	@echo '| Thanks for using Unreal IRCd! If you are in need |' 
	@echo '| for any kind of help regarding the IRCd please   |'
	@echo '| read the Unreal.nfo file.                        |' 
	@echo '|__________________________________________________|'

clean:
	$(RM) -f *~ \#* core *.orig include/*.orig
	@for i in $(SUBDIRS); do \
		echo "Cleaning $$i";\
		( cd $$i; ${MAKE} ${MAKEARGS} clean; ) \
	done
	-@if [ -f include/setup.h ] ; then \
	  echo "To really restart installation, remove include/setup.h" ; \
	fi
	-@if [ -f include/settings.h ] ; then \
	  echo "and include/settings.h" ; \
	fi

cleandir: clean
	rm -rf include/networks.h include/setup.h include/settings.h Makefile Settings

makex: fromdos
	chmod +x Config newnet bsdinstall ircd ircdcron/ircdchk killircd
	chmod +x makeconf rehash ircdreg

fromdos: cleandir
	$(FROMDOS) -dv *
	$(FROMDOS) -dv src/*
	$(FROMDOS) -dv include/*
	$(FROMDOS) -dv doc/*
	$(FROMDOS) -dv crypt/*
	$(FROMDOS) -dv ircdcron/*
makedist: makex
	echo "Making UnrealIRCd compatible IRCd Dist."

stamp: makedist
	echo "/* Auto created release stamping */" > include/stamp.h
	echo "#define RELEASEID2 \"`date +%s`\"" >> include/stamp.h
	echo "#define RELEASESTUFF \"`hostname`\"" >> include/stamp.h
	echo "" >> include/stamp.h

depend:
	@for i in $(SUBDIRS); do \
		echo "Making dependencies in $$i";\
		( cd $$i; ${MAKE} ${MAKEARGS} depend; ) \
	done

install: all
	@echo "Now install by hand; make install is broken."