#!/bin/sh
#
# Config script for UnrealIRCd
# (C) 2001 The UnrealIRCd Team
#
# This configure script is free software; the UnrealIRCd Team gives 
# unlimited permission to copy, distribute and modify as long as the
# copyright headers stay intact
#
#
# Rewritten completely to be an interface to autoconf by codemastr
# This was inspired by the config by Michael Graff (explorer@flame.org)
# but was written from scratch

# In order to be faster than the old Config, this assumes that all information
# in the cache file is valid and therefore doesn't check it, so if you messed with
# default values thats your problem :P

# some bits edited by baafie on March 17 2004, every change marked.


RUN_CONFIGURE () {
ARG=" "

if [ -z "$BINDIR" -o -z "$DATADIR" -o -z "$CONFDIR" -o -z "$MODULESDIR" -o -z "$LOGDIR" -o -z "$CACHEDIR" -o -z "$DOCDIR" -o -z "$TMPDIR" ]; then
	echo "Sorry './Config -quick' cannot be used because your 'config.settings'"
	echo "file either does not exist or is from an old UnrealIRCd version"
	echo "(older than version 3.4-alpha4)."
	echo ""
	echo "Please run './Config' without -quick and answer all questions."
	echo ""
	exit
fi

mkdir -p $TMPDIR

# Do this even if we're not in advanced mode
if [ "$SHOWLISTMODES" = "1" ] ; then
	ARG="$ARG--with-showlistmodes "
fi
if [ "$ADVANCED" = "1" ] ; then
if [ "$TOPICNICKISNUH" = "1" ] ; then
	ARG="$ARG--with-topicisnuhost "
fi
if [ "$SHUNNOTICES" = "1" ] ; then
	ARG="$ARG--with-shunnotices "
fi
if [ "$NOOPEROVERRIDE" = "1" ] ; then
	ARG="$ARG--with-no-operoverride "
fi
if [ "$DISABLEUSERMOD" = "1" ] ; then
	ARG="$ARG--with-disableusermod "
fi
if [ "$OPEROVERRIDEVERIFY" = "1" ] ; then
	ARG="$ARG--with-operoverride-verify "
fi
if [ "$DISABLEEXTBANSTACKING" = "1" ]; then
	ARG="$ARG--with-disable-extendedban-stacking ";
fi
fi
if test x"$SSLDIR" = "x" ; then
ARG="$ARG--enable-ssl "
else
ARG="$ARG--enable-ssl=$SSLDIR "
fi
if [ "$REMOTEINC" = "1" ] ; then
ARG="$ARG--enable-libcurl=$CURLDIR "
fi
if [ "$PREFIXAQ" != "1" ]; then
ARG="$ARG--disable-prefixaq "
fi

ARG="$ARG--with-bindir=$BINDIR "
ARG="$ARG--with-datadir=$DATADIR "
ARG="$ARG--with-confdir=$CONFDIR "
ARG="$ARG--with-modulesdir=$MODULESDIR "
ARG="$ARG--with-logdir=$LOGDIR "
ARG="$ARG--with-cachedir=$CACHEDIR "
ARG="$ARG--with-docdir=$DOCDIR "
ARG="$ARG--with-tmpdir=$TMPDIR "

ARG="$ARG--with-nick-history=$NICKNAMEHISTORYLENGTH "
ARG="$ARG--with-sendq=$MAXSENDQLENGTH "
ARG="$ARG--with-permissions=$DEFPERM "
ARG="$ARG--with-fd-setsize=$MAXCONNECTIONS "
ARG="$ARG--enable-dynamic-linking "
ARG="$ARG $EXTRAPARA "
CONF="./configure $ARG"
if [ "x$INSTALLCURL" = "x1" ]; then
	extras/curlinstall || exit 1
fi
echo $CONF
$CONF || exit 1
cd "$UNREALCWD"
if [  "$QUICK" != "1" ] ; then
if [ ! -f $CONFDIR/ssl/server.cert.pem ]; then
export OPENSSLPATH
TEST=""
while [ -z "$TEST" ] ; do
    if [ "$GENCERTIFICATE" = "1" ] ; then
	TEST="Yes"
    else
	TEST="No"
    fi
    echo ""
    echo "Do you want to generate an SSL certificate for the IRCd?"
    echo "Only answer No if you already have one."
    echo $n "[$TEST] -> $c"
	read cc
    if [ -z "$cc" ] ; then
	cc=$TEST
    fi
    case "$cc" in
	[Yy]*)
	    GENCERTIFICATE="1"
	    ;;
	[Nn]*)
	    GENCERTIFICATE=""
	    ;;
	*)
	    echo ""
	    echo "You must enter either Yes or No"
	    TEST=""
	    ;;
    esac
done
if [ "$GENCERTIFICATE" = 1 ]; then
	make pem
	echo Certificate created succesfully.
	sleep 1
else
	echo "Ok, not generating SSL certificate. Make sure that the certificate and key"
	echo "are installed in conf/ssl/server.crt.pem and conf/ssl/server.key.pem prior to starting the IRCd."
fi
else
echo "SSL certificate exists in $CONFDIR/ssl/server.cert.pem, no need to regenerate."
fi
fi
}

RUN_ADVANCED () {
TEST=""
while [ -z "$TEST" ] ; do
    if [ "$SHOWLISTMODES" = "1" ] ; then
	TEST="Yes"
    else
	TEST="No"
    fi
    echo ""
    echo "Do you want to show the modes a channel has set in the /list output?"
    echo $n "[$TEST] -> $c"
	read cc
    if [ -z "$cc" ] ; then
	cc=$TEST
    fi
    case "$cc" in
	[Yy]*)
	    SHOWLISTMODES="1"
	    ;;
	[Nn]*)
	    SHOWLISTMODES=""
	    ;;
	*)
	    echo ""
	    echo "You must enter either Yes or No"
	    TEST=""
	    ;;
    esac
done

TEST=""
while [ -z "$TEST" ] ; do
    if [ "$TOPICNICKISNUH" = "1" ] ; then
	TEST="Yes"
    else
	TEST="No"
    fi
    echo ""
    echo "Do you want the /topic command to show the nick!user@host of the person"
    echo "who set the topic, rather than just the nickname?"
    echo $n "[$TEST] -> $c"
	read cc
    if [ -z "$cc" ] ; then
	cc=$TEST
    fi
    case "$cc" in
	[Yy]*)
	    TOPICNICKISNUH="1"
	    ;;
	[Nn]*)
	    TOPICNICKISNUH=""
	    ;;
	*)
	    echo ""
	    echo "You must enter either Yes or No"
	    TEST=""
	    ;;
    esac
done

TEST=""
while [ -z "$TEST" ] ; do
    if [ "$SHUNNOTICES" = "1" ] ; then
	TEST="Yes"
    else
	TEST="No"
    fi
    echo ""
    echo "Should Unreal notify a user when they are no longer shunned?"
    echo $n "[$TEST] -> $c"
	read cc
    if [ -z "$cc" ] ; then
	cc=$TEST
    fi
    case "$cc" in
	[Yy]*)
	    SHUNNOTICES="1"
	    ;;
	[Nn]*)
	    SHUNNOTICES=""
	    ;;
	*)
	    echo ""
	    echo "You must enter either Yes or No"
	    TEST=""
	    ;;
    esac
done

TEST=""
while [ -z "$TEST" ] ; do
    if [ "$NOOPEROVERRIDE" = "1" ] ; then
	TEST="Yes"
    else
	TEST="No"
    fi
    echo ""
    echo "Do you want to disable oper override?"
    echo $n "[$TEST] -> $c"
	read cc
    if [ -z "$cc" ] ; then
	cc=$TEST
    fi
    case "$cc" in
	[Yy]*)
	    NOOPEROVERRIDE="1"
	    ;;
	[Nn]*)
	    NOOPEROVERRIDE=""
	    ;;
	*)
	    echo ""
	    echo "You must enter either Yes or No"
	    TEST=""
	    ;;
    esac
done

TEST=""
while [ -z "$TEST" ] ; do
    if [ "$DISABLEUSERMOD" = "1" ] ; then
	TEST="Yes"
    else
	TEST="No"
    fi
    echo ""
    echo "Do you want to disable /sethost, /setident, /chgname,"
    echo "/chghost, and /chgident?"
    echo $n "[$TEST] -> $c"
	read cc
    if [ -z "$cc" ] ; then
	cc=$TEST
    fi
    case "$cc" in
	[Yy]*)
	    DISABLEUSERMOD="1"
	    ;;
	[Nn]*)
	    DISABLEUSERMOD=""
	    ;;
	*)
	    echo ""
	    echo "You must enter either Yes or No"
	    TEST=""
	    ;;
    esac
done

TEST=""
while [ -z "$TEST" ] ; do
    if [ "$OPEROVERRIDEVERIFY" = "1" ] ; then
	TEST="Yes"
    else
	TEST="No"
    fi
    echo ""
    echo "Do you want to require opers to /invite themselves into a +s or +p channel?"
    echo $n "[$TEST] -> $c"
	read cc
    if [ -z "$cc" ] ; then
	cc=$TEST
    fi
    case "$cc" in
	[Yy]*)
	    OPEROVERRIDEVERIFY="1"
	    ;;
	[Nn]*)
	    OPEROVERRIDEVERIFY=""
	    ;;
	*)
	    echo ""
	    echo "You must enter either Yes or No"
	    TEST=""
	    ;;
    esac
done

TEST=""
while [ -z "$TEST" ] ; do
    if [ "$DISABLEEXTBANSTACKING" = "1" ] ; then
        TEST="Yes"
    else
        TEST="No"
    fi
    echo ""
    echo "Do you want to disable extended ban stacking (~q:~c:#test, etc) support?"
    echo $n "[$TEST] -> $c"
        read cc
    if [ -z "$cc" ] ; then
        cc=$TEST
    fi
    case "$cc" in
        [Yy]*)
            DISABLEEXTBANSTACKING="1"
            ;;
        [Nn]*)
            DISABLEEXTBANSTACKING="0"
            ;;
        *)
            echo ""
            echo "You must enter either Yes or No"
            TEST=""
            ;;
    esac
done

}
c=""
n=""
UNREALCWD="`pwd`"
BASEPATH="$HOME/unrealircd"
DEFPERM="0600"
SSLDIR=""
NICKNAMEHISTORYLENGTH="2000"
MAXSENDQLENGTH="3000000"
MAXCONNECTIONS="1024"
REMOTEINC=""
CURLDIR=""
PREFIXAQ="1"
SHOWLISTMODES="1"
TOPICNICKISNUH=""
SHUNNOTICES=""
NOOPEROVERRIDE=""
DISABLEUSERMOD=""
OPEROVERRIDEVERIFY=""
DISABLEEXTBANSTACKING=""
GENCERTIFICATE="1"
EXTRAPARA=""
if [ "`eval echo -n 'a'`" = "-n a" ] ; then
        c="\c"
else
        n="-n"
fi


#parse arguments
NOCACHE=""
IMPORTEDSETTINGS=""
NOINTRO=""
QUICK=""
CLEAN=""
ADVANCED=""
while [ $# -ge 1 ] ; do
	if [ $1 = "--help" ] ; then
		echo "Config utility for UnrealIRCd"
		echo "-----------------------------"
		echo "Syntax: ./Config [options]"
		echo "-nocache     Ignore settings saved in config.settings"
		echo "-nointro     Skip intro (release notes, etc)"
		echo "-quick       Skip questions, go straight to configure"
		echo "-advanced    Include additional advanced questions"
		echo "-clean       Clean ./configure cache"
		exit 0
	elif [ $1 = "-nocache" ] ; then
		NOCACHE="1"
	elif [ $1 = "-nointro" ] ; then
		NOINTRO="1"
	elif [ $1 = "-quick" -o $1 = "-q" ] ; then
		QUICK="1"
		echo "running quick config"
		if [ -f "config.settings" ] ; then
			. ./config.settings
		fi
		RUN_CONFIGURE
		cd "$UNREALCWD"
		exit 0
	elif [ $1 = "-clean" -o $1 = "-C" ] ; then
		CLEAN="1"
	elif [ $1 = "-advanced" ] ; then
		PREADVANCED="1"
	fi
	shift 1
done

if [ "$PREADVANCED" = "1" ] ; then
	ADVANCED="1"
elif [ "$ADVANCED" = "1" ]; then
	ADVANCED=""
fi

if [ -n "$CLEAN" ] ; then
	rm -f config.cache
fi

clear

    if [ -f ".CHANGES.NEW" -a -z "$NOINTRO" ] ; then
        more .CHANGES.NEW
        echo $n "[Enter to continue]"
        read cc
        clear
    fi
    if [ -f "doc/RELEASE-NOTES" -a -z "$NOINTRO" ] ; then
        more doc/RELEASE-NOTES
        echo $n "[Enter to continue]"
        read cc
        clear
    fi

echo "We will now ask you a number of questions."
echo "You can just press ENTER to accept the defaults!"
echo ""

if [ -z "$NOCACHE" ] ; then
	# This needs to be updated each release:
	UNREALRELEASES="Unreal3.4-beta3 Unreal3.4-beta2 Unreal3.4-beta1 Unreal3.4-alpha4 Unreal3.4-alpha3 Unreal3.4-alpha2 Unreal3.4-alpha1"
	if [ -f "config.settings" ]; then
		. ./config.settings
	else
		# Try to load a previous config.settings
		for x in $UNREALRELEASES
		do
			if [ -f ../$x/config.settings ]; then
				IMPORTEDSETTINGS="../$x"
				break
			fi
		done
		echo "If you have previously installed UnrealIRCd on this shell then you can specify a"
		echo "directory here so I can import the build settings and third party modules"
		echo "to make your life a little easier."
		if [ ! -z "$IMPORTEDSETTINGS" ]; then
			echo "Found previous installation in: $IMPORTEDSETTINGS."
			echo "You can enter a different path or type 'none' if you don't want to use it."
			echo "Just press Enter to accept the default settings."
		else
			echo "If you install UnrealIRCd for the first time on this shell, then just hit Enter";
		fi

		TEST="$IMPORTEDSETTINGS"
		echo $n "[$TEST] -> $c"
		read cc
		if [ -z "$cc" ]; then
			IMPORTEDSETTINGS="$TEST"
		else
			IMPORTEDSETTINGS="$cc"
		fi
		if [ "$IMPORTEDSETTINGS" = "none" ]; then
			IMPORTEDSETTINGS=""
		fi
		if [ "$IMPORTEDSETTINGS" != "" ]; then
			if [ ! -f $IMPORTEDSETTINGS/config.settings ]; then
				echo "Directory $IMPORTEDSETTINGS does not exist or does not contain a config.settings file"
				exit
			fi
			# Actually load the settings
			. $IMPORTEDSETTINGS/config.settings
			# Copy over 3rd party modules (also deals with 0 file cases, hence the silly looking code)
			for f in $IMPORTEDSETTINGS/src/modules/third/*.c
			do
				[ -e "$f" ] && cp $f src/modules/third/
			done
		fi
	fi
fi

TEST="$BASEPATH"
echo ""
echo "In what directory do you want to install UnrealIRCd?"
echo "(Note: in Unreal3.4.x you should always install somewhere,"
echo "and if this directory does not exist it will be created)"
echo $n "[$TEST] -> $c"
read cc
if [ -z "$cc" ] ; then
   BASEPATH=$TEST
else
   BASEPATH=`eval echo $cc` # modified
fi

# TODO: For -advanced we could prompt the user.
BINDIR="$BASEPATH/bin"
DATADIR="$BASEPATH/data"
CONFDIR="$BASEPATH/conf"
MODULESDIR="$BASEPATH/modules"
LOGDIR="$BASEPATH/logs"
CACHEDIR="$BASEPATH/cache"
DOCDIR="$BASEPATH/doc"
TMPDIR="$BASEPATH/tmp"

TEST=""
while [ -z "$TEST" ] ; do
    TEST="$DEFPERM"
    echo ""
    echo "What should the default permissions for your configuration files be? (Set this to 0 to disable)"
    echo "It is strongly recommended that you use 0600 to prevent unwanted reading of the file"
    echo $n "[$TEST] -> $c"
	read cc
    if [ -z "$cc" ] ; then
	DEFPERM=$TEST
	break
    fi
    case "$cc" in
	[0-9]*)
	    DEFPERM="$cc"
	    ;;
	*)
	    echo ""
	    echo "You must enter a number"
	    TEST=""
	    ;;
    esac

done

TEST="$SSLDIR"
echo ""
echo "If you know the path to OpenSSL on your system, enter it here. If not"
echo "leave this blank (in most cases it will be detected automatically)."
echo $n "[$TEST] -> $c"
    read cc
if [ -z "$cc" ] ; then
    SSLDIR="$TEST"
else 
    SSLDIR=`eval echo $cc` # modified
fi

TEST=""
while [ -z "$TEST" ] ; do
    if [ "$REMOTEINC" = "1" ] ; then
	TEST="Yes"
    else
	TEST="No"
    fi
    echo ""
    echo "Do you want to enable remote includes?"
    echo "This allows stuff like this in your configuration file:"
    echo "include \"http://www.somesite.org/files/opers.conf\";"
    echo $n "[$TEST] -> $c"
	read cc
    if [ -z "$cc" ] ; then
	cc=$TEST
    fi
    case "$cc" in
	[Yy]*)
	    REMOTEINC="1"
	    ;;
	[Nn]*)
	    REMOTEINC=""
	    CURLDIR=""
	    ;;
	*)
	    echo ""
	    echo "You must enter either Yes or No"
	    TEST=""
	    ;;
    esac
done

if [ "$REMOTEINC" = "1" ] ; then
	if [ ! -d "$CURLDIR" ]; then
		# Reset any previous CURLDIR if it doesn't exist (anymore)
		CURLDIR=""
	fi


	INSTALLCURL="0"
        if [ "x$CURLDIR" = "x" ]; then
	        # There is no reason to support this:
	        if [ -d "/usr/local/include/curl" ]; then
		    CURLDIR="/usr/local"
		fi
	        # Zeroeth, let's act SANE
	        if [ -d "/usr/include/curl" ]; then
		    CURLDIR="/usr"
		fi
                # First, let's make shell admins happy...
                if [ -d "/usr/share/unreal-curl" ]; then
                        CURLDIR="/usr/share/unreal-curl"
                fi

                GOTASYNC=0
                if [ "x$CURLDIR" != "x" ]; then
                    # Check if it's of any use: a curl without async dns (cares) hangs the entire ircd..
                    # normally this is done in ./configure but now we're forced to do it also here..
                    if "$CURLDIR"/bin/curl-config --features | grep -q -e AsynchDNS; then
                        GOTASYNC="1"
                    fi
                  if [ "$GOTASYNC" != "1" ]; then
                          PREVCURLDIR="$CURLDIR"
                          CURLDIR=""
                  fi
                fi
                
                # Second, use the local curl if it exists (overrides above)
                if [ -d "$HOME/curl" ]; then
                        CURLDIR="$HOME/curl"
                        
                        # Check if it's recent enough...
                        # But first, check if curl-config can be trusted at all: it depends
                        # on 'bc' for some reason and not all systems have that installed!
                        echo "1+1"|bc 1>/dev/null 2>&1
                        if [ "$?" = 0 ]; then
                            "$CURLDIR"/bin/curl-config --checkfor 7.21.0
                            if [ "$?" != 0 ]; then
                                    echo ""
                                    echo "Your self-compiled CURL library in $CURLDIR is slightly outdated."
                                    echo "This probably means you had the library from a previous installation of UnrealIRCd."
                                    echo "Because previous versions may be linked to a previous version to c-ares which"
                                    echo "were not ABI compatible it is highly recommended to remove the version"
                                    echo "and recompile it. We now have an automatic downloader and installer to compile"
                                    echo "and install curl for you (in $CURLDIR). You can choose to do so in the question"
                                    echo "after this one."
                                    TEST=""
                                    while [ -z "$TEST" ] ; do
                                        TEST="Yes"
                                        echo "Shall I rename $CURLDIR to $CURLDIR.old so it can be rebuild later on?"
                                        echo $n "[$TEST] -> $c"
                                        read cc
                                        if [ -z "$cc" ] ; then
                                            cc=$TEST
                                        fi
                                        case "$cc" in
                                            [Yy]*)
                                                rm -rf "$CURLDIR".old
                                                mv "$CURLDIR" "$CURLDIR".old
                                                CURLDIR=""
                                                GOTASYNC=1
                                                # wow the GOTASYNC=1 is hackish, but we need to prevent the error from later on
                                                ;;
                                            [Nn]*)
                                                echo "Uh, ok... I hope you know what you are doing..."
                                                echo ""
                                                ;;
                                            *)
                                                echo ""
                                                echo "You must enter either Yes or No"
                                                TEST=""
                                                ;;
                                        esac
                                    done
                            fi
                        fi
                fi
                
                # Need to output it here, as the HOME check from above may cause this to be no longer relevant.
                if [ "x$CURLDIR" = "x" -a "$GOTASYNC" != "1" ]; then
                	echo "Curl library was found in $PREVCURLDIR, but it does not support Asynchronous DNS (not compiled with c-ares)"
                	echo "so it's of no use to us."
                fi
                	
        fi
        if [ "x$CURLDIR" = "x" ]; then
        	# Still empty?
        	TEST=""
                while [ -z "$TEST" ] ; do
                    TEST="Yes"
                    echo ""
        	    echo "Do you want me to automatically download and install curl for you?"
        	    echo "(will install in $HOME/curl)"
                    echo $n "[$TEST] -> $c"
                        read cc
                    if [ -z "$cc" ] ; then
                        cc=$TEST
                    fi
                    case "$cc" in
                        [Yy]*)
                            INSTALLCURL="1"
                            CURLDIR="$HOME/curl"
                            ;;
                        [Nn]*)
                            INSTALLCURL="0"
                            ;;
                        *)
                            echo ""
                            echo "You must enter either Yes or No"
                            TEST=""
                            ;;
                    esac
                done
        fi

	if [ "$INSTALLCURL" != "1" ]; then
	  TEST=""
          while [ -z "$TEST" ] ; do
                  TEST="$CURLDIR"
                  echo ""
                  echo "Specify the directory you installed libcurl to"
                  echo $n "[$TEST] -> $c"
                  read cc
                  if [ -z "$cc" ] ; then
                      cc=$TEST
                  else
                      TEST=$cc
                      CURLDIR=`eval echo $cc` # modified
                  fi
          done
        fi
fi


TEST=""
while [ -z "$TEST" ] ; do
    if [ "$PREFIXAQ" = "1" ] ; then
	TEST="Yes"
    else
	TEST="No"
    fi
    echo ""
    echo "Do you want to enable prefixes for chanadmin and chanowner?"
    echo "This will give +a the & prefix and ~ for +q (just like +o is @)"
    echo "Supported by the major clients (mIRC, xchat, epic, eggdrop, Klient,"
    echo "PJIRC, irssi, CGI:IRC, etc.)"
    echo "This feature should be enabled/disabled network-wide."
    echo $n "[$TEST] -> $c"
	read cc
    if [ -z "$cc" ] ; then
	cc=$TEST
    fi
    case "$cc" in
	[Yy]*)
	    PREFIXAQ="1"
	    ;;
	[Nn]*)
	    PREFIXAQ=""
	    ;;
	*)
	    echo ""
	    echo "You must enter either Yes or No"
	    TEST=""
	    ;;
    esac
done

TEST=""
while [ -z "$TEST" ] ; do
    TEST="$NICKNAMEHISTORYLENGTH"
    echo ""
    echo "How far back do you want to keep the nickname history?"
    echo $n "[$TEST] -> $c"
	read cc
    if [ -z "$cc" ] ; then
	NICKNAMEHISTORYLENGTH=$TEST
	break
    fi
    case "$cc" in
	[1-9]*)
	    NICKNAMEHISTORYLENGTH="$cc"
	    ;;
	*)
	    echo ""
	    echo "You must enter a number"
	    TEST=""
	    ;;
    esac
done

TEST=""
while [ -z "$TEST" ] ; do
    TEST="$MAXSENDQLENGTH"
    echo ""
    echo "What is the maximum sendq length you wish to have?"
    echo $n "[$TEST] -> $c"
	read cc
    if [ -z "$cc" ] ; then
	MAXSENDQLENGTH=$TEST
	break
    fi
    case "$cc" in
	[1-9][0-9][0-9][0-9]*)
	    MAXSENDQLENGTH="$cc"
	    ;;
	*)
	    echo ""
	    echo "You must enter a number greater than or equal to 1000"
	    TEST=""
	    ;;
    esac
done

echo ""
TEST=""
while [ -z "$TEST" ] ; do
    TEST="$MAXCONNECTIONS"
    echo ""
    echo "How many file descriptors (or sockets) can the IRCd use?"
    echo $n "[$TEST] -> $c"
	read cc
    if [ -z "$cc" ] ; then
	MAXCONNECTIONS=$TEST
	break
    fi
    case "$cc" in
	[1-9][0-9][0-9]*)
	    MAXCONNECTIONS="$cc"
	    ;;
	*)
	    echo ""
	    echo "You must to enter a number greater than or equal to 100"
	    TEST=""
	    ;;
    esac
done
if [ -n "$ADVANCED" ] ; then
	RUN_ADVANCED
fi

TEST="$EXTRAPARA"
echo ""
echo "Would you like to pass any custom parameters to configure?"
echo "See  \`./configure --help' and write them here:"
echo $n "[$TEST] -> $c"
read EXTRAPARA
if [ -z "$EXTRAPARA" ]; then
    EXTRAPARA="$TEST"
fi

rm -f config.settings
cat > config.settings << __EOF__
#
BASEPATH="$BASEPATH"
BINDIR="$BINDIR"
DATADIR="$DATADIR"
CONFDIR="$CONFDIR"
MODULESDIR="$MODULESDIR"
LOGDIR="$LOGDIR"
CACHEDIR="$CACHEDIR"
DOCDIR="$DOCDIR"
TMPDIR="$TMPDIR"
PREFIXAQ="$PREFIXAQ"
MAXSENDQLENGTH="$MAXSENDQLENGTH"
MAXCONNECTIONS="$MAXCONNECTIONS"
NICKNAMEHISTORYLENGTH="$NICKNAMEHISTORYLENGTH"
DEFPERM="$DEFPERM"
SSLDIR="$SSLDIR"
REMOTEINC="$REMOTEINC"
CURLDIR="$CURLDIR"
SHOWLISTMODES="$SHOWLISTMODES"
TOPICNICKISNUH="$TOPICNICKISNUH"
SHUNNOTICES="$SHUNNOTICES"
NOOPEROVERRIDE="$NOOPEROVERRIDE"
DISABLEUSERMOD="$DISABLEUSERMOD"
OPEROVERRIDEVERIFY="$OPEROVERRIDEVERIFY"
DISABLEEXTBANSTACKING="$DISABLEEXTBANSTACKING"
GENCERTIFICATE="$GENCERTIFICATE"
EXTRAPARA="$EXTRAPARA"
ADVANCED="$ADVANCED"
__EOF__
RUN_CONFIGURE
cd "$UNREALCWD"
cat << __EOF__

 _______________________________________________________________________
|                                                                       |
|                    UnrealIRCd Compile-Time Config                     |
|_______________________________________________________________________|
|_______________________________________________________________________|
|                                                                       |
| Now all you have to do is type 'make' and let it compile. When that's |
| done, you will receive other instructions on what to do next.         |
|                                                                       |
|_______________________________________________________________________|
|_______________________________________________________________________|
|                        - The UnrealIRCd Team -                        |
|                                                                       |
| * Bram Matthys (Syzop)     syzop@unrealircd.org                       |
| * Travis McArthur (Heero)  heero@unrealircd.org                       |
|_______________________________________________________________________|
__EOF__