177f102d26
Update example conf translations on new listen block.
2015-09-07 15:45:04 +02:00
972ef43a81
Update listen block in example.conf to new format.
2015-09-07 15:40:01 +02:00
a89d64869b
Upd release notes
2015-09-07 13:48:11 +02:00
13d7da7a7b
Update release notes and bump version to 3.4-beta4.
2015-09-06 10:09:19 +02:00
8c9ddb4767
Server protocol documentation moved to the wiki at https://www.unrealircd.org/docs/Server_protocol
2015-09-05 09:43:00 +02:00
c17d0291c9
Update release notes. 3.4-beta3 release now.
2015-08-16 15:09:30 +02:00
e4139a3c79
update release notes (crash reporter)
2015-08-15 18:19:10 +02:00
787563beef
Change version to 3.4-beta3 (some fixes will follow though, before release)
2015-08-15 18:12:47 +02:00
4a890e3915
Add IPv6 info to release notes.
2015-07-29 11:00:20 +02:00
7072902844
Update version to 3.4-beta2.
2015-07-23 14:52:16 +02:00
c088dd61e5
update release notes for 3.4-beta2
2015-07-23 14:48:26 +02:00
5d25c36a6c
Add doc/conf/examples/example.tr.conf, translated by Serkan.
2015-07-17 16:22:27 +02:00
591c322d0f
Translate the example conf in French
2015-07-15 22:52:18 +02:00
ef341b1f6d
Link to servers faster after boot. Check links for re-linking more often. Allow connfreq of 5 seconds. Set default to 15. Get rid of HANGONGOODLINK/HANGONRETRYDELAY stuff.
2015-07-14 15:23:28 +02:00
0028f6ad64
Change version to 3.4-beta1.
2015-07-13 20:17:18 +02:00
cdc6042fa8
Remove example.xx.conf until they are re-translated to the 3.4.x format & example conf rewrites of past month(s).
2015-07-13 13:18:05 +02:00
3a8a0450c8
update example conf
2015-07-13 12:28:47 +02:00
95b13123a3
and from sample conf
2015-07-12 15:54:01 +02:00
d33f1ca8f6
Remove /ADDLINE: it's (too) easy to create a broken configuration file this way and then have an un-rehashable and un-bootable IRCd without having shell access. Use SSH or SFTP/SCP instead. Or even better: remote includes, of course :)
2015-07-12 15:34:08 +02:00
da935b7e41
Remove /UNZLINE and /UNKLINE: all these commands did was tell you to use /ZLINE -xx and /KLINE -xx instead.
2015-07-11 11:21:42 +02:00
6c0ebb5bd3
Protection against linking race conditions is back again (IOTW: allow very rapid re-linking), but only if your network is fully 3.4.x (actually: current git unreal34 or later)
...
Re-implemented PROTOCTL SERVERS= which nenolod ripped out (#4355 ).
Add 2nd argument to PROTOCTL EAUTH=servername,unrealprotocol
Change UnrealProtocol from 2350 to 2351
2015-07-10 21:57:13 +02:00
e52545c107
update release notes a bit
2015-07-10 13:00:39 +02:00
6747653e90
update release notes on parv[0] (under MODULE CODERS)
2015-07-10 12:36:08 +02:00
de1c6330eb
Add validation to operclass parsing
2015-07-09 15:44:36 -07:00
2f8cb55e47
Add extended SWHOIS support. Allows multiple swhoises and tracking of who/what set the swhois.
...
Added swhois_add / swhois_delete functions which also take care of broadcasting
New remove_oper_privileges() function, will move the rest to use this (svsnoop svsmode etc)
Not finished yet...
2015-07-09 16:26:52 +02:00
3cb780bdb3
remove umodes g/h/v from help.conf as they are removed/moved
2015-07-09 14:41:19 +02:00
f03d865e77
Remove /CHATOPS. We already have /GLOBOPS which does the same.
...
Update help.conf a bit, in a lazy way.
2015-07-09 14:22:33 +02:00
ad4ab6c5f5
Update close permissions
2015-07-05 12:04:40 -07:00
ab7912caf4
Update opermotd permissions
2015-07-05 12:04:40 -07:00
5616f3acf9
Refactor setident permissions
2015-07-05 12:04:39 -07:00
f8448145af
update release notes a bit
2015-07-05 14:10:36 +02:00
f58402365c
Moved jointhrottle from channel mode +j to set::anti-flood::join-flood
...
with a default of 3:90 (3 joins per 90 seconds). There's rarely any need
to configure this on a per-channel basis and this way it's enabled by
default for everyone (unless you decide not to load load the module)
2015-07-05 13:31:56 +02:00
a90b7354b3
Add blacklist module for DNSBL checking.
2015-07-04 15:02:22 +02:00
8473cc1b1c
[ #4358 ]: Introduce certfp extban
2015-07-04 00:39:52 +08:00
b884ed3e8d
Remove more IsOp/IsAnOp
2015-06-29 01:55:22 -07:00
a1e7fefe94
Remove IsPrivileged
2015-06-27 14:13:26 -07:00
dc2b09a334
Remove more IsAnOp/IsOp
2015-06-27 14:06:34 -07:00
5943dd8c09
Remove some IsOper/IsAnOper
2015-06-27 11:25:22 -07:00
7b09e1ca97
Fix example.conf and upgrade spamfilter.conf
2015-06-27 18:29:27 +02:00
9161068098
remove some old sections from release notes.
2015-06-27 17:34:13 +02:00
13f4a8613e
add stuff on new oper system in release notes
2015-06-27 13:22:25 +02:00
81cba1b12d
Remove remaining OPCan*
...
Updates to default operclasses as well
2015-06-26 11:08:00 -07:00
ed4ed2a03d
add some more comments in modules.default.conf in extbans section.
2015-06-26 16:08:26 +02:00
d01ba1b3b6
remove adminonly (+A) channel mode. as there is no admin anymore.
2015-06-26 15:51:02 +02:00
329968a425
operclass: add map:real-map and map-ulines (show real map even if flat map, and show u-lined servers even if hide ulines is set)
...
grant map privilege to globop and higher in operclass.default.conf
2015-06-26 11:02:47 +02:00
734fd8ad5f
grant override:see to globops and above in operclass.default.conf.
2015-06-26 10:58:18 +02:00
2769e4860a
default operclasses: allow globop and higher to override whois and names by default (to see users in channels)
2015-06-26 10:49:56 +02:00
f981843672
add xxx-with-override operclasses. also to show inheritance.
2015-06-26 10:45:40 +02:00
eca9a0e55e
first version of doc/conf/operclass.default.conf. still testing...
2015-06-26 10:38:05 +02:00
0f2af3f506
current 3.4.x git is really bleeding edge now, come back in a day or so:
...
* remove netadmin, services-admin, admin, co-admin.
* remove all oper flags (there are some placeholders for the next... <24hrs..)
* ADMINCHAT and NACHAT are gone, since admin & netadmin no longer exist
* SVSO used oper flags, but this no longer exists, SVSO removed. maybe later we can add some sort of replacement.. maybe..
* re-style the m_oper code a bit
2015-06-25 22:26:53 +02:00
Bram Matthys