Anope 2.0.0-rc4 Release

ns_cert: Bold code 2 -> 002.

CMakeLists.txt

@@ -497,6 +497,10 @@ if(WIN32)
   install(FILES ${Anope_SOURCE_DIR}/src/win32/anope.bat
     DESTINATION ${BIN_DIR}
   )
+
+  # Package any DLLs in src/win/
+  file(GLOB EXTRA_DLLS RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} "${Anope_SOURCE_DIR}/src/win32/*.dll")
+  install(FILES ${EXTRA_DLLS} DESTINATION ${BIN_DIR})
 endif(WIN32)
 
 install(CODE "file(REMOVE_RECURSE \"${CMAKE_INSTALL_PREFIX}/${LIB_DIR}/modules\")")

Config

@@ -2,7 +2,7 @@
 #
 # Configuration script for Services.
 #
-# Anope (c) 2003-2011 Anope team
+# Anope (c) 2003-2014 Anope Team
 # Contact us at team@anope.org
 #
 # This program is free but copyrighted software; see the file COPYING for

data/botserv.example.conf

@@ -3,7 +3,17 @@
  */
 
 /*
- * First, create the service.
+ * First, create the service. If you do not want to have a 'BotServ', but do want the ability to have
+ * ChanServ assigned to channels for the use of fantasy commands, you may delete the below 'service' block.
+ *
+ * Note that deleting a 'service' block for a pseudoclient that is already online will not remove the
+ * client, the client becomes no different from a normal service bot, so you will have to use botserv/bot
+ * to manually delete the client.
+ *
+ * You may then waant to map some of the below commands to other services, like placing botserv/bot on
+ * OperServ so you can delete the below client, and mapping assign and unassign to ChanServ so users are
+ * able to control whether or not ChanServ is in the channel. You may also want to map botserv/set/nobot
+ * to OperServ so you can restrict who can assign the other core service clients.
  */
 service
 {
@@ -62,6 +72,8 @@ module
 
 	/*
 	 * The name of the client that should be BotServ.
+	 *
+	 * This directive is optional.
 	 */
 	client = "BotServ"
 
@@ -147,9 +159,10 @@ command { service = "BotServ"; name = "SET NOBOT"; command = "botserv/set/nobot"
  *
  * Allows service bots to be automatically assigned to channels upon registration.
  */
-#module { name = "bs_autoassign" }
-bs_autoassign
+#module
 {
+	name = "bs_autoassign"
+
 	/*
 	 * Automatically assign ChanServ to channels upon registration.
 	 */

data/chanserv.example.conf

@@ -173,18 +173,18 @@ module
  * ChanServ privilege configuration.
  *
  * ChanServ privileges are used to determine who has what access in channels. By default the core has its own
- * set of levels it uses for various ChanServ commands, which are defined below. Privilege ranks are used to
- * determine how powerful privileges are relative to each other, which is used by Anope to determine who has greater
- * access in a channel.
+ * set of privileges it uses for various commands, which are defined below. Privilege ranks are used to
+ * determine how powerful privileges are relative to other privileges, which is used by Anope to determine
+ * who has greater access in a channel.
  *
- * If you loaded cs_access, you may define a level for the privilege, which is used by chanserv/access and chanserv/levels.
+ * If you load cs_access, you may define a level for the privilege, which is used by chanserv/access and chanserv/levels.
  * The levels defined will be used as the default levels for newly registered channels.
  * The level "founder" is a special level which means anyone with the privilege FOUNDER on the channel
  * has that permission. Additionally, the level "disabled" means that no one can use the privilege, including founders.
  *
- * If you loaded cs_flags, you may define a flag associated with that privilege for use in chanserv/flags.
+ * If you load cs_flags, you may define a flag associated with that privilege for use in chanserv/flags.
  *
- * If you loaded cs_xop, you may define a xop command to associate the privilege with.
+ * If you load cs_xop, you may define a XOP command to associate the privilege with.
  *
  * The name of privileges are uesd to associate them with channel modes. If you are using an IRCd that allows you to define additional
  * channel status modes, such as InspIRCd, you can associate privileges (and thus access levels, flags, xop) with the mode by naming
@@ -403,7 +403,7 @@ privilege
 {
 	name = "FOUNDER"
 	rank = 360
-	level = "founder"
+	level = 10000
 	flag = "F"
 	xop = "QOP"
 }
@@ -829,7 +829,12 @@ command { service = "ChanServ"; name = "HELP"; command = "generic/help"; }
  * Provides commands chanserv/access and chanserv/levels.
  * Provides the access system "levels".
  *
- * Used for giving users access in channels.
+ * Used for giving users access in channels using a levels system. Allows allows redefining which privileges
+ * are representated by given level on a per channel basis.
+ *
+ * The "LIST" subcommand of chanserv/access will show every access entry on the channel, including access
+ * entries not added by cs_access. The "level" of these entries will be the representation of the access
+ * entry by the other access system, which could be an XOP command name, or a set of flags.
  */
 module { name = "cs_access" }
 command { service = "ChanServ"; name = "ACCESS"; command = "chanserv/access"; group = "chanserv/access"; }
@@ -921,6 +926,10 @@ command { service = "ChanServ"; name = "ENTRYMSG"; command = "chanserv/entrymsg"
  * Provides the access system "flags".
  *
  * Used for giving users access in channels.
+ *
+ * The "LIST" subcommand of chanserv/flags will show every access entry on the channel, including access
+ * entries not added by cs_flags. The "Flags" of these entries will be the flags representation of the
+ * privilege set granted by the access entry. 
  */
 module { name = "cs_flags" }
 command { service = "ChanServ"; name = "FLAGS"; command = "chanserv/flags"; group = "chanserv/access"; }
@@ -1032,7 +1041,9 @@ command { service = "ChanServ"; name = "LOG"; command = "chanserv/log"; group =
  *
  * Provides the command chanserv/mode and chanserv/modes.
  *
- * Used for changing mode locks and changing modes.
+ * Used for changing mode locks and changing modes. Multiple commands may be mapped to chanserv/modes, the
+ * configuration directive 'set' and 'unset' are used to tell chanserv/modes which modes should be set or
+ * unset when the command is executed.
  */
 module
 {
@@ -1133,6 +1144,12 @@ module
 	 * 3: ban in the form of *!*user@*.domain
 	 */
 	defbantype = 2
+
+	/*
+	 * If set, persisent channels have their creation times lowered to their
+	 * original registration dates.
+	 */
+	persist_lower_ts = true
 }
 command { service = "ChanServ"; name = "SET"; command = "chanserv/set"; group = "chanserv/management"; }
 command { service = "ChanServ"; name = "SET AUTOOP"; command = "chanserv/set/autoop"; }
@@ -1249,6 +1266,9 @@ command { service = "ChanServ"; name = "UP"; command = "chanserv/up"; group = "c
  * privileges given by each is determined by the privilege:xop settings above. These commands should
  * be ordered from highest to lowest, as each command inherits the privileges of the commands below
  * it.
+ *
+ * The "LIST" subcommand of chanserv/xop will show only XOP access entries of the given XOP type. You
+ * can not view the entire access list at once, and instead should use another access system to do that.
  */
 module { name = "cs_xop" }
 command { service = "ChanServ"; name = "QOP"; command = "chanserv/xop"; group = "chanserv/access"; }

data/chanstats.example.conf

@@ -26,10 +26,9 @@ module
 
 	/*
 	 * Enable Chanstats for newly registered nicks / channels.
-	 * Set it to 0 to disable it.
 	 */
-	NSDefChanstats = 1
-	CSDefChanstats = 1
+	ns_def_chanstats = yes
+	cs_def_chanstats = yes
 }
 command { service = "ChanServ"; name = "SET CHANSTATS"; command = "chanserv/set/chanstats"; }
 command { service = "NickServ"; name = "SET CHANSTATS"; command = "nickserv/set/chanstats"; }

data/example.conf

@@ -168,7 +168,7 @@ uplink
 
 	/*
 	 * Enable if Services should connect using SSL.
-	 * You must have m_ssl loaded for this to work.
+	 * You must have an SSL module loaded for this to work.
 	 */
 	ssl = no
 
@@ -276,13 +276,6 @@ module
 	 * If the protocol module you have loaded does not support this, this setting will have no effect.
 	 */
 	use_server_side_topiclock = yes
-
-	/*
-	 * Some IRCds allow "SASL" authentication to let users identify to Services
-	 * during the IRCd user registration process. If set, Services will allow
-	 * authenticating users through this mechanism.
-	 */
-	sasl = yes
 }
 
 /*
@@ -541,7 +534,7 @@ options
 
 	/*
 	 * Default language that non- and newly-registered nicks will receive messages in.
-	 * Leave empty to default to English.
+	 * Set to "en" to enable English. Defaults to the language the system uses.
 	 */
 	#defaultlanguage = "es_ES.UTF-8"
 }
@@ -767,6 +760,8 @@ log
  *  nickserv/auspex               - Can see any information with /nickserv info
  *  nickserv/confirm              - Can confirm other users nicknames
  *  nickserv/drop                 - Can drop other users nicks
+ *  operserv/config               - Can modify services's configuration
+ *  protected                     - Can not be kicked from channels by Services
  *
  * Available commands:
  *   botserv/bot/del          botserv/bot/add               botserv/bot/change        botserv/set/private
@@ -1222,6 +1217,7 @@ module
  *
  */
 
+#module { name = "enc_bcrypt" }
 module { name = "enc_sha256" }
 #module { name = "enc_md5" }
 #module { name = "enc_sha1" }

data/hostserv.example.conf

@@ -139,7 +139,7 @@ command { service = "HostServ"; name = "ON"; command = "hostserv/on"; }
 /*
  * hs_request
  *
- * Provides the commands hostserv/request, hostserv/active, hostserv/reject, and hostserv/waiting.
+ * Provides the commands hostserv/request, hostserv/activate, hostserv/reject, and hostserv/waiting.
  *
  * Used to manage vHosts requested by users.
  */

data/irc2sql.example.conf

@@ -3,63 +3,6 @@
  *
  */
 
-module
-{
-	name = "irc2sql"
-
-	/* 
-	 * The name of this engine.
-	 * This must match with the name in the mysql{ } block
-	 */
-	engine ="mysql/main"
-
-	/*
-	 * An optional prefix to prepended to the name of each created table.
-	 * Do not use the same prefix for other programs.
-	 */
-
-	prefix = "anope_"
-
-	/*
-	 * GeoIP - Automagically add a users geoip to the user table.
-	 * Tables are created by irc2sql, you have to run the
-	 * geoipupdate script after you started anope to download
-	 * and import the actual geoip database
-	 *
-	 */
-
-	/*
-	 * Enable GeoIP Lookup
-	 */
-	GeoIPLookup = yes
-
-	/*
-	 * Chose between the smaller 'country' or the bigger 'city' database.
-	 *
-	 */
-	GeoIPDatabase = "country"
-
-	/*
-	 * The name of the client that should send the CTCP VERSION requests.
-	 * It must already exist or must be defined in the following service block.
-	 */
-	client = "StatServ"
-
-	/*
-	 * Get the CTCP version from users
-	 * The users connecting to the network will receive a CTCP VERSION
-	 * request from the above configured services client
-	 */
-	ctcpuser = "yes"
-
-	/*
-	 * Send out CTCP VERSION requests to users during burst.
-	 * Disable this if you restart Anope often and don't want to
-	 * annoy your users.
-	 */
-	ctcpeob = "yes"
-}
-
 service
 {
 	/*
@@ -104,3 +47,52 @@ service
 	 */
 	#channels = "@#services,#mychan"
 }
+
+module
+{
+	name = "irc2sql"
+
+	/*
+	 * The name of the client that should send the CTCP VERSION requests.
+	 * It must already exist or must be defined in the following service block.
+	 */
+	client = "StatServ"
+
+	/* 
+	 * The name of the SQL engine to use.
+	 * This must be MySQL and must match the name in the mysql{} block
+	 */
+	engine = "mysql/main"
+
+	/*
+	 * An optional prefix to prepended to the name of each created table.
+	 * Do not use the same prefix for other programs.
+	 */
+	prefix = "anope_"
+
+	/*
+	 * GeoIP - Automatically adds users geoip location to the user table.
+	 * Tables are created by irc2sql, you have to run the
+	 * geoipupdate script after you started Anope to download
+	 * and import the GeoIP database.
+	 *
+	 * The geoip database can be the smaller "country" database or the
+	 * larger "city" database. Comment to disable geoip lookup.
+	 */
+	geoip_database = "country"
+
+	/*
+	 * Get the CTCP version from users
+	 * The users connecting to the network will receive a CTCP VERSION
+	 * request from the above configured services client
+	 */
+	ctcpuser = "yes"
+
+	/*
+	 * Send out CTCP VERSION requests to users during burst.
+	 * Disable this if you restart Anope often and don't want to
+	 * annoy your users.
+	 */
+	ctcpeob = "yes"
+}
+

data/modules.example.conf

@@ -159,7 +159,7 @@ module { name = "help" }
 }
 
 /*
- * m_httpd [EXTRA]
+ * m_httpd
  *
  * Allows services to serve web pages. By itself, this module does nothing useful.
  *
@@ -184,7 +184,7 @@ module { name = "help" }
 		/* Time before connections to this server are timed out. */
 		timeout = 30
 
-		/* Listen using SSL. Requires m_ssl. */
+		/* Listen using SSL. Requires an SSL module. */
 		#ssl = yes
 
 		/* If you are using a reverse proxy that sends one of the
@@ -340,9 +340,85 @@ module { name = "help" }
 		port = 3306
 	}
 }
+/*
+ * m_redis
+ *
+ * This module allows other modules to use Redis.
+ */
+#module
+{
+	name = "m_redis"
+
+	/* A redis database */
+	redis
+	{
+		/* The name of this service */
+		name = "redis/main"
+
+		/*
+		 * The redis database to use. New connections default to 0.
+		 */
+		db = 0
+
+		ip = "127.0.0.1"
+		port = 6379
+	}
+}
 
 /*
- * m_proxyscan [EXTRA]
+ * m_regex_pcre [EXTRA]
+ *
+ * Provides the regex engine regex/pcre, which uses the Perl Compatible Regular Expressions library.
+ */
+#module { name = "m_regex_pcre" }
+
+/*
+ * m_regex_posix [EXTRA]
+ *
+ * Provides the regex engine regex/posix, which uses the POSIX compliant regular expressions.
+ * This is likely the only regex module you will not need extra libraries for.
+ */
+#module { name = "m_regex_posix" }
+
+/*
+ * m_regex_tre [EXTRA]
+ *
+ * Provides the regex engine regex/tre, which uses the TRE regex library.
+ */
+#module { name = "m_regex_tre" }
+
+/*
+ * m_rewrite
+ *
+ * Allows rewriting commands sent to/from clients.
+ */
+#module { name = "m_rewrite" }
+#command
+{
+	service = "ChanServ"; name = "CLEAR"; command = "rewrite"
+
+	/* Enable m_rewrite. */
+	rewrite = true
+
+	/* Source message to match. A $ can be used to match anything. */
+	rewrite_source = "CLEAR $ USERS"
+
+	/*
+	 * Message to rewrite the source message to. A $ followed by a number, eg $0, gets
+	 * replaced by the number-th word from the source_message, starting from 0.
+	 */
+	rewrite_target = "KICK $1 *"
+
+	/*
+	 * The command description. This only shows up in HELP's output.
+	 * Comment this option to prevent the command from showing in the
+	 * HELP command.
+	 */
+	rewrite_description = "Clears all users from a channel"
+}
+
+/*
+ * m_proxyscan
  *
  * This module allows you to scan connecting clients for open proxies.
  * Note that using this will allow users to get the IP of your services.
@@ -423,6 +499,97 @@ module { name = "help" }
 	}
 }
 
+/*
+ * m_sasl
+ *
+ * Some IRCds allow "SASL" authentication to let users identify to Services
+ * during the IRCd user registration process. If this module is loaded, Services will allow
+ * authenticating users through this mechanism. Supported mechanisms are:
+ * PLAIN, EXTERNAL.
+ */
+#module { name = "m_sasl" }
+
+/*
+ * m_sasl_dh-aes [EXTRA]
+ *
+ * Add the DH-AES mechanism to SASL.
+ * Requires m_sasl to be loaded.
+ * Requires openssl.
+ */
+#module { name = "m_sasl_dh-aes" }
+
+/*
+ * m_sasl_dh-aes [EXTRA]
+ *
+ * Add the DH-BLOWFISH mechanism to SASL.
+ * Requires m_sasl to be loaded.
+ * Requires openssl.
+ */
+#module { name = "m_sasl_dh-blowfish" }
+
+/*
+ * m_ssl_gnutls [EXTRA]
+ *
+ * This module provides SSL services to Anope using GnuTLS, for example to
+ * connect to the uplink server(s) via SSL.
+ *
+ * You may only load either m_ssl_gnutls or m_ssl_openssl, bot not both.
+ */
+#module
+{
+	name = "m_ssl_gnutls"
+
+	/*
+	 * An optional certificate and key for m_gnutls to give to the uplink.
+	 *
+	 * You can generate your own certificate and key pair by using:
+	 *
+	 *   certtool --generate-privkey --bits 2048 --outfile anope.key
+	 *   certtool --generate-self-signed --load-privkey anope.key --outfile anope.crt
+	 *
+	 */
+	cert = "data/anope.crt"
+	key = "data/anope.key"
+
+	/*
+	 * Diffie-Hellman parameters to use when acting as a server. This is only
+	 * required for TLS servers that want to use ephemeral DH cipher suites.
+	 *
+	 * This is NOT required for Anope to connect to the uplink server(s) via SSL.
+	 *
+	 * You can generate DH parameters by using:
+	 *
+	 *   certtool --generate-dh-params --bits 2048 --outfile dhparams.pem
+	 *
+	 */
+#	dhparams = "data/dhparams.pem"
+}
+
+/*
+ * m_ssl_openssl [EXTRA]
+ *
+ * This module provides SSL services to Anope using OpenSSL, for example to
+ * connect to the uplink server(s) via SSL.
+ *
+ * You may only load either m_ssl_openssl or m_ssl_gnutls, bot not both.
+ *
+ */
+#module
+{
+	name = "m_ssl_openssl"
+
+	/*
+	 * An optional certificate and key for m_openssl to give to the uplink.
+	 *
+	 * You can generate your own certificate and key pair by using:
+	 *
+	 *   openssl genrsa -out anope.key 2048
+	 *   openssl req -new -x509 -key anope.key -out anope.crt -days 1095
+	 */
+	cert = "data/anope.crt"
+	key = "data/anope.key"
+}
+
 /*
  * m_sql_authentication [EXTRA]
  *
@@ -466,10 +633,16 @@ module { name = "help" }
 	 * If not set, then registration is not blocked.
 	 */
 	#disable_reason = "To register on this network visit http://some.misconfigured.site/register"
+
+	/*
+	 * If set, the reason to give the users who try to "/msg NickServ SET EMAIL".
+	 * If not set, then email changing is not blocked.
+	 */
+	#disable_email_reason = "To change your email address visit http://some.misconfigured.site"
 }
 
 /*
- * m_sql_log
+ * m_sql_log [EXTRA]
  *
  * This module adds an additional target option to log{} blocks
  * that allows logging Service's logs to SQL. To log to SQL, add
@@ -535,127 +708,7 @@ module { name = "help" }
 }
 
 /*
- * m_redis
- *
- * This module allows other modules to use Redis.
- */
-#module
-{
-	name = "m_redis"
-
-	/* A redis database */
-	redis
-	{
-		/* The name of this service */
-		name = "redis/main"
-
-		/*
-		 * The redis database to use. New connections default to 0.
-		 */
-		db = 0
-
-		ip = "127.0.0.1"
-		port = 6379
-	}
-}
-
-/*
- * m_regex_pcre [EXTRA]
- *
- * Provides the regex engine regex/pcre, which uses the Perl Compatible Regular Expressions library.
- */
-#module { name = "m_regex_pcre" }
-
-/*
- * m_regex_posix [EXTRA]
- *
- * Provides the regex engine regex/posix, which uses the POSIX compliant regular expressions.
- * This is likely the only regex module you will not need extra libraries for.
- */
-#module { name = "m_regex_posix" }
-
-/*
- * m_regex_tre [EXTRA]
- *
- * Provides the regex engine regex/tre, which uses the TRE regex library.
- */
-#module { name = "m_regex_tre" }
-
-/*
- * m_rewrite
- *
- * Allows rewriting commands sent to/from clients.
- */
-#module { name = "m_rewrite" }
-#command
-{
-	service = "ChanServ"; name = "CLEAR"; command = "rewrite"
-
-	/* Enable m_rewrite. */
-	rewrite = true
-
-	/* Source message to match. A $ can be used to match anything. */
-	rewrite_source = "CLEAR $ USERS"
-
-	/*
-	 * Message to rewrite the source message to. A $ followed by a number, eg $0, gets
-	 * replaced by the number-th word from the source_message, starting from 0.
-	 */
-	rewrite_target = "KICK $1 *"
-
-	/*
-	 * The command description. This only shows up in HELP's output.
-	 * Comment this option to prevent the command from showing in the
-	 * HELP command.
-	 */
-	rewrite_description = "Clears all users from a channel"
-}
-
-/*
- * m_ssl [EXTRA]
- *
- * This module uses SSL to connect to the uplink server(s).
- */
-#module
-{
-	name = "m_ssl"
-
-	/*
-	 * An optional certificate and key for m_ssl to give to the uplink.
-	 *
-	 * You can generate your own certificate and key pair by using:
-	 *
-	 *   openssl genrsa -out anope.key 2048
-	 *   openssl req -new -x509 -key anope.key -out anope.crt -days 1095
-	 */
-	cert = "data/anope.crt"
-	key = "data/anope.key"
-}
-
-/*
- * m_xmlrpc [EXTRA]
- *
- * Allows remote applications (websites) to execute queries in real time to retrieve data from Anope.
- * By itself this module does nothing, but allows other modules (m_xmlrpc_main) to receive and send XMLRPC queries.
- */
-#module
-{
-	name = "m_xmlrpc"
-
-	/* Web service to use. Requires m_httpd. */
-	server = "httpd/main"
-}
-
-/*
- * m_xmlrpc_main [EXTRA]
- *
- * Adds the main XMLRPC core functions.
- * Requires m_xmlrpc.
- */
-#module { name = "m_xmlrpc_main" }
-
-/*
- * webcpanel [EXTRA]
+ * webcpanel
  *
  * This module creates a web configuration panel that allows users and operators to perform any task
  * as they could over IRC. If you are using the default configuration you should be able to access
@@ -676,3 +729,25 @@ module { name = "help" }
 	/* Page title. */
 	title = "Anope IRC Services";
 }
+
+/*
+ * m_xmlrpc
+ *
+ * Allows remote applications (websites) to execute queries in real time to retrieve data from Anope.
+ * By itself this module does nothing, but allows other modules (m_xmlrpc_main) to receive and send XMLRPC queries.
+ */
+#module
+{
+	name = "m_xmlrpc"
+
+	/* Web service to use. Requires m_httpd. */
+	server = "httpd/main"
+}
+
+/*
+ * m_xmlrpc_main
+ *
+ * Adds the main XMLRPC core functions.
+ * Requires m_xmlrpc.
+ */
+#module { name = "m_xmlrpc_main" }

data/stats.standalone.example.conf

@@ -168,7 +168,7 @@ uplink
 
 	/*
 	 * Enable if Services should connect using SSL.
-	 * You must have m_ssl loaded for this to work.
+	 * You must have an SSL module loaded for this to work.
 	 */
 	ssl = no
 

data/version.log

@@ -1,4 +1,174 @@
-Revision d9a1c1f - Fri, 20 Dec 2013 22:56:38 -0500 - Update version.log
+Revision f830884 - Mon, 24 Feb 2014 00:30:47 -0500 - Package dlls in src/win32 on Windows
+Revision 1dfdf36 - Mon, 24 Feb 2014 00:06:38 -0500 - Fix m_ssl_gnutls to send its cert. Most of this is from Attila.
+Revision 4ac3ade - Sun, 23 Feb 2014 23:08:35 -0500 - Use a more reliable way to detect if services are running in anoperc
+Revision 212abeb - Sun, 23 Feb 2014 23:42:43 +0100 - webcpanel: Update copyright year. ns_cert: Bold code 2 -> 002.
+Revision 7d4427c - Sun, 23 Feb 2014 05:24:06 +0100 - Regenerated language files.
+Revision e836be4 - Sat, 22 Feb 2014 17:46:00 -0500 - Store a cert->account map and use it for SASL EXTERNAL and certfp auth
+Revision 1db5c55 - Sat, 22 Feb 2014 13:46:36 -0500 - Merge pull request #58 from attilamolnar/2.0+gnutlsdep
+Revision bb1b015 - Sat, 22 Feb 2014 16:59:10 +0100 - Make m_ssl_gnutls work with at least GnuTLS v2.8
+Revision e42684a - Sat, 22 Feb 2014 16:40:56 +0100 - Update italian translation, from Simos.
+Revision d7de7ee - Sat, 22 Feb 2014 15:58:36 +0100 - Italian language completed translation, first release
+Revision 0a390ad - Sat, 22 Feb 2014 15:56:34 +0100 - Regenerated language files, and updated dutch language file.
+Revision aa6b12c - Fri, 21 Feb 2014 21:54:01 -0500 - Fix Windows build
+Revision e2bd08f - Fri, 21 Feb 2014 20:50:23 -0500 - Add some missing serial updates in os_dns
+Revision 2047934 - Fri, 21 Feb 2014 19:57:31 -0500 - Regenerate Italian language file
+Revision e07dcbf - Fri, 21 Feb 2014 19:57:31 -0500 - Update italian translation, from Simos
+Revision e3a8a45 - Fri, 21 Feb 2014 19:49:29 -0500 - Merge pull request #56 from ShutterQuick/2.0+noxcrypt
+Revision f1ad7fd - Fri, 21 Feb 2014 20:41:41 +0000 - fix comment, activate not active
+Revision 43f2645 - Thu, 20 Feb 2014 20:07:38 +0000 - update help info
+Revision b6935e7 - Thu, 20 Feb 2014 11:42:20 -0800 - enc_bcrypt.cpp: Get rid of the libxcrypt dependency by including code from libxcrypt, and move enc_bcrypt out of extras
+Revision a3c8458 - Thu, 20 Feb 2014 17:11:11 +0000 - Updated services crontab location
+Revision 5933a5e - Tue, 18 Feb 2014 22:24:24 +0000 - Merge remote branch 'upstream/2.0' into 2.0
+Revision 109d8f4 - Tue, 18 Feb 2014 13:04:16 -0500 - Do not import forbids with wildcards in their names, how 1.8 treats wildcaded forbids depends on the IRCd
+Revision 1edb7e7 - Tue, 18 Feb 2014 12:59:37 -0500 - Merge pull request #54 from attilamolnar/2.0+webcpanelfix
+Revision 928e2e1 - Tue, 18 Feb 2014 12:57:31 -0500 - Fix loading noexpire channels in db_old
+Revision 5a140e4 - Tue, 18 Feb 2014 12:54:22 -0500 - Merge pull request #55 from attilamolnar/2.0+alphabet
+Revision f643939 - Tue, 18 Feb 2014 13:00:46 +0100 - Alphabetically order modules in modules.example.conf ('r' < 's' and 'w' < 'x')
+Revision 0db81ca - Mon, 17 Feb 2014 22:21:08 -0500 - Merge pull request #52 from attilamolnar/2.0+gnutls
+Revision 7f7144d - Mon, 17 Feb 2014 22:20:38 -0500 - Merge pull request #53 from attilamolnar/2.0+reuseaddrfix
+Revision 3883716 - Tue, 18 Feb 2014 03:28:02 +0100 - Turn BinarySocket::Write() into a no-op when called with l == 0
+Revision 5beea4e - Tue, 18 Feb 2014 03:27:12 +0100 - Fix TemplateFileServer writing empty messages resulting in zero length DataBlocks being created and later passed to SocketIO::Send()
+Revision 2d0fdb7 - Tue, 18 Feb 2014 02:31:01 +0100 - Fix setsockopt() with SO_REUSEADDR not working due to wrong argument type
+Revision 80588fb - Mon, 17 Feb 2014 19:43:19 -0500 - Fix os_ignore to work correctly with SQL
+Revision ef7dc94 - Mon, 17 Feb 2014 19:39:25 -0500 - Move most of the implementation details out of os_forbid.h, fixes crashing if a module adding a forbid is unloaded without removing the forbid
+Revision 7b4eec9 - Mon, 17 Feb 2014 13:53:45 -0500 - Remove docs/IRCD, it is very outdated and no longer correct at all
+Revision baff417 - Mon, 17 Feb 2014 13:53:04 -0500 - Move encryption.h to include/modules
+Revision 7074944 - Mon, 17 Feb 2014 13:39:49 -0500 - Fix not applying ipv[46]_cidr to connecting clients in os_session, #1573
+Revision 1c39d25 - Mon, 17 Feb 2014 01:12:01 +0100 - Add m_ssl_gnutls
+Revision f1c5c27 - Sun, 16 Feb 2014 23:49:57 +0000 - Merge branch '2.0', remote branch 'upstream/2.0' into 2.0
+Revision 9c0134e - Mon, 17 Feb 2014 00:41:36 +0100 - Rename m_ssl to m_ssl_openssl and update docs
+Revision 959fee5 - Sun, 16 Feb 2014 18:28:39 -0500 - Fix Windows build
+Revision 3854a55 - Sun, 16 Feb 2014 16:07:36 -0500 - Merge pull request #51 from ShutterQuick/2.0+oldforbid
+Revision ab1e0eb - Sun, 16 Feb 2014 12:56:27 -0800 - db_old.cpp: Correctly import forbidden nicks and chans
+Revision cffe864 - Sun, 16 Feb 2014 14:10:25 -0500 - Merge pull request #50 from ShutterQuick/bcrypt
+Revision bc15753 - Sun, 16 Feb 2014 11:07:37 -0800 - modules.example.conf: Update examples for bcrypt - also clearify that m_sasl_dh* requires openssl
+Revision a71d0f6 - Sun, 16 Feb 2014 11:07:36 -0800 - enc_bcrypt: Add module
+Revision 50d7bf7 - Fri, 14 Feb 2014 19:15:43 -0500 - Merge pull request #48 from ShutterQuick/2.0+nnghsasl
+Revision d44bcef - Fri, 14 Feb 2014 16:06:24 -0800 - modules.example.conf: Add info about m_sasl_dh-aes and m_sasl_dh-blowfish
+Revision c0ce71e - Fri, 14 Feb 2014 15:12:25 -0800 - m_sasl_dh-blowfish: Add module
+Revision 0eeb0ca - Fri, 14 Feb 2014 15:12:25 -0800 - m_sasl_dh-aes: Add module
+Revision b13bded - Fri, 14 Feb 2014 15:03:42 -0800 - sasl.h, m_sasl.cpp: Move IdentifyRequest to the header
+Revision 1b1180f - Fri, 14 Feb 2014 13:42:21 -0800 - base64.cpp: B64Decode(): Don't crash on "="
+Revision a4ecfa5 - Fri, 14 Feb 2014 13:05:01 -0800 - Anope::string: Add .data()
+Revision 3c8009b - Fri, 14 Feb 2014 13:05:01 -0800 - sasl.h, m_sasl.cpp: Add RemoveSession(), DeleteSessions(), and have active sessions closed when a Mechanism is unloaded
+Revision ca85df2 - Fri, 14 Feb 2014 11:10:20 -0500 - Don't convert XOP access entries to levels in db_old
+Revision 5dfa659 - Fri, 14 Feb 2014 11:09:53 -0500 - Do not sync channels in Channel::Reset if they are in the middle of syncing, and checkmodes in Channel::Sync. Fixes channel modes sometimes not being set if always_lower_ts is on
+Revision f428d61 - Thu, 13 Feb 2014 19:42:02 -0500 - Use better command access checking in webpanel for operserv/akill
+Revision fc50edf - Wed, 12 Feb 2014 14:49:22 -0500 - Disable m_sasl by default
+Revision 269c278 - Wed, 12 Feb 2014 14:39:41 -0500 - Add SASL EXTERNAL support. Thanks to ShutterQuick for fixing and testing.
+Revision 96fc940 - Tue, 11 Feb 2014 19:25:44 -0500 - Only trim newlines and carriage returns in BufferedSocket::GetLine
+Revision 8c8e6d4 - Tue, 11 Feb 2014 18:08:09 -0500 - Make initial registration notices with mail less repetitive
+Revision 22976b8 - Tue, 11 Feb 2014 17:33:28 -0500 - Fix flags +* or -* sometimes incorrectly reporting opers as overriding when they are not
+Revision 4dff710 - Tue, 11 Feb 2014 03:57:15 +0100 - ns_suspend: Show the setter of the suspension and the reason when manually unsuspending.
+Revision fe80d2c - Tue, 11 Feb 2014 02:26:00 +0100 - os_modinfo: Add ability to list only extra modules.
+Revision 16dac87 - Mon, 10 Feb 2014 10:03:38 -0500 - Regenerate anope.it_IT.po
+Revision 30c5956 - Mon, 10 Feb 2014 09:57:24 -0500 - Update Italian language translation
+Revision 6d61a84 - Sun, 9 Feb 2014 18:51:52 -0500 - Add an opertype priv "protected" to not allow services to kick a user. Also classify ulines as protected
+Revision f6b8596 - Sun, 9 Feb 2014 10:59:36 -0500 - Log memoserv/sendall
+Revision da6760f - Fri, 7 Feb 2014 13:28:07 -0500 - Properly convert suspended nicks and channels in db_old
+Revision ad962ad - Fri, 7 Feb 2014 13:12:57 -0500 - Allow other modules to suspend nicknames and channels without having to subclass suspendinfo
+Revision 5327bec - Fri, 7 Feb 2014 13:02:20 -0500 - Allow other modules to be able to view and modify cs and ns set_misc data
+Revision f43c99c - Fri, 7 Feb 2014 12:12:52 -0500 - Merge pull request #46 from ShutterQuick/patch-1
+Revision c0a491c - Fri, 7 Feb 2014 18:04:16 +0100 - Update cs_updown.cpp
+Revision 66cc965 - Wed, 5 Feb 2014 15:26:03 -0500 - Ignore nonblocking errnors on socket operations
+Revision 2440514 - Wed, 5 Feb 2014 08:46:56 -0500 - Document a little more accurrately the privilege stuff and document why the access lists behave as they do
+Revision fad1da8 - Wed, 5 Feb 2014 08:46:56 -0500 - Process mode changes in ns_ajoin before joining users, fixes not being able to ajoin users to +R channels on Unreal
+Revision bb0e2a9 - Wed, 5 Feb 2014 08:46:51 -0500 - Make it easier to use fantasy without botserv, and document it
+Revision 4f8c4f8 - Mon, 3 Feb 2014 10:05:13 -0500 - Actually just allow mode clear to take any mode name
+Revision 2595711 - Mon, 3 Feb 2014 08:41:27 -0500 - Fix typo in mode clear, exempts -> excepts
+Revision 9a88953 - Sun, 2 Feb 2014 03:21:02 -0500 - Apply the last commit to cs_list
+Revision 53f8db0 - Sat, 1 Feb 2014 11:42:08 -0800 - Merge pull request #44 from ShutterQuick/2.0+listfix
+Revision f94cb7f - Sat, 1 Feb 2014 11:24:52 -0800 - ns_list: Fix typo (NS_SUSPENDED -> SUSPENDED)
+Revision c30fb13 - Sat, 1 Feb 2014 11:12:39 -0800 - Merge pull request #43 from ShutterQuick/2.0+ajoinfix
+Revision 7926238 - Sat, 1 Feb 2014 10:55:12 -0800 - Improve IsChannelValid()
+Revision 211a944 - Sat, 1 Feb 2014 10:35:10 -0800 - ns_ajoin: Treat ',' as a separator.
+Revision cff6161 - Sat, 1 Feb 2014 10:31:17 -0800 - commasepstream: Add a allowempty param
+Revision 4455d43 - Fri, 31 Jan 2014 02:43:26 -0800 - Merge pull request #42 from ShutterQuick/2.0+saslfix
+Revision 405b41e - Fri, 31 Jan 2014 01:41:27 -0800 - protocol/(inspircd12/unreal/charybdis): Have SASL login in on the account name instead of nick alias
+Revision bacb276 - Tue, 28 Jan 2014 14:45:21 -0500 - Use TBURST on hybrid to set topics
+Revision 4c1f6b4 - Sun, 26 Jan 2014 16:08:23 -0800 - Merge pull request #40 from attilamolnar/2.0+csclonefix
+Revision 53a78c2 - Sun, 26 Jan 2014 20:06:36 +0100 - Fix cs_clone allowing users to clone a channel to itself
+Revision e61a283 - Sun, 26 Jan 2014 16:33:28 +0100 - Update language files.
+Revision c330219 - Sun, 26 Jan 2014 01:18:38 -0500 - Anope 2.0.0-rc3 Release
+Revision cd18459 - Sun, 26 Jan 2014 01:17:58 -0500 - Only have extras rerun config if it was successfully run before. Config can create the build directory even if cmake isn't found.
+Revision f28b114 - Sun, 26 Jan 2014 01:15:19 -0500 - Correct error message in gl_global to reference the right module
+Revision 87230c1 - Sun, 26 Jan 2014 01:14:58 -0500 - Fix extra space in the unknown command error message
+Revision a29b789 - Sun, 26 Jan 2014 01:14:28 -0500 - Use the SQLine reason in the kick reason for sqlined channels
+Revision e965bc3 - Sun, 26 Jan 2014 01:03:43 -0500 - Revert "Rename db_old hash plain -> none which is what 1.8 calls it"
+Revision 01780c9 - Sat, 25 Jan 2014 17:58:20 -0500 - Fix setname handler on unreal
+Revision 4d3363f - Tue, 21 Jan 2014 21:55:59 -0500 - Anope 2.0.0-rc2 Release
+Revision 75e27b6 - Tue, 21 Jan 2014 21:55:59 -0500 - Update version.log
+Revision fbaca3f - Tue, 21 Jan 2014 21:55:56 -0500 - Update language files
+Revision 81b01bb - Tue, 21 Jan 2014 21:10:06 -0500 - Fix missing colon in stats and top, fix smileys and actions count. Patch by bush.
+Revision 1027ec6 - Tue, 21 Jan 2014 17:33:57 -0500 - Made the chanstats confs try and look similar to every other configuration file
+Revision 4d9273e - Tue, 21 Jan 2014 17:20:15 -0500 - Unbreak account stuff from commit ccae59430ab50393f43ccc38a6a6c0c24191b601.
+Revision 67c13b4 - Tue, 21 Jan 2014 00:29:59 +0100 - Update and fix some more typos in the dutch language file.
+Revision 10386a3 - Tue, 21 Jan 2014 00:28:40 +0100 - Make the server connected (uplink) message more sane.
+Revision dc19ea3 - Mon, 20 Jan 2014 02:19:06 -0500 - Alias charybdis/uid -> ratbox/uid because grawity is weird
+Revision 2261fa3 - Mon, 20 Jan 2014 00:05:53 -0500 - Fix example config for bs_autoassign
+Revision fab9f0f - Sun, 19 Jan 2014 19:03:19 -0500 - Change config readers bool logic to accept unrecognized values as yes
+Revision df8d85d - Sun, 19 Jan 2014 08:11:19 +0100 - m_chanstats: fixed the config options NSDefChanstats and CSDefChanstats
+Revision 4b192ad - Fri, 17 Jan 2014 06:49:49 +0100 - m_chanstats: do not count negative words if you have more smileys in a line than words
+Revision d27594f - Wed, 15 Jan 2014 16:59:32 -0500 - Fix webcpanels chanserv/modes page
+Revision 43aaaea - Tue, 14 Jan 2014 03:50:08 -0500 - Mark m_sql_log, m_rewrite, and m_dnsbl as extra so they show up in modlist with no parameters, as they are "unusual"
+Revision ccae594 - Tue, 14 Jan 2014 03:49:22 -0500 - Call User::Login after sending the login event, in case a module wants to act on the fact that the ircd sees  the user as logged in
+Revision 974adb7 - Sun, 12 Jan 2014 17:44:14 -0500 - Update French language file
+Revision f3531e7 - Fri, 10 Jan 2014 01:41:03 -0500 - Fix not initializing module in the main log constructor
+Revision 15a27c6 - Thu, 9 Jan 2014 17:01:18 -0500 - Move oper count and vhost stuff to set/remove mode internal
+Revision 0b0db75 - Thu, 9 Jan 2014 16:45:07 -0500 - Fix repeat kicker message to show the correct number of times a user can say the same thing before being kicked
+Revision b90a9a3 - Thu, 9 Jan 2014 16:09:38 -0500 - Fix empty ttb in bs kick repeat on
+Revision 64f9aed - Thu, 9 Jan 2014 15:46:04 -0500 - Hook to OnUserLogin instead of OnNickIdentify in ns_ajoin
+Revision 56f2cbe - Thu, 9 Jan 2014 15:44:58 -0500 - Remove help access levels from help output because it no longer exists
+Revision 9a9ca41 - Thu, 9 Jan 2014 15:42:31 -0500 - Rename db_old hash plain -> none which is what 1.8 calls it
+Revision e19661e - Thu, 9 Jan 2014 15:41:49 -0500 - Make DNSBL log message use the module type and give it a category too
+Revision 09879c5 - Mon, 6 Jan 2014 13:59:14 -0500 - Fix compile with -std=c++11
+Revision 12f55e4 - Mon, 6 Jan 2014 12:54:29 -0500 - Hide +s channels from /cs list output to non opers
+Revision 43c5654 - Mon, 6 Jan 2014 00:19:19 -0500 - Add a small note about the extras script in docs/INSTALL
+Revision d307885 - Sun, 5 Jan 2014 15:39:09 -0800 - Merge pull request #39 from DanielOaks/cs-status-channelname
+Revision d4f7db1 - Mon, 6 Jan 2014 09:37:08 +1000 - Add the channel name to reply of cs-status, useful for applications
+Revision 201ad9c - Sat, 4 Jan 2014 17:54:04 -0500 - Always run uid/sid generation loop at least once to not reuse older ids immediately
+Revision 45c0bf8 - Sat, 4 Jan 2014 17:45:58 -0500 - Fix recovering enforcers not properly quitting them
+Revision d64855b - Sat, 4 Jan 2014 13:44:47 -0500 - Allow m_sql_authentication to disable email changing similar to m_ldap_authentication
+Revision 4617fdb - Sat, 4 Jan 2014 13:41:08 -0500 - Make /cs status use the chanserv/auspex privilege instead of chanserv/access/modify, as it only views channel access
+Revision ac20474 - Sat, 4 Jan 2014 12:24:04 -0500 - Also make m_sql_authentication block nick grouping if it is disabling registration
+Revision e1ce617 - Fri, 3 Jan 2014 19:54:14 -0500 - Move modules/stats under extras because it depends on m_mysql, update its config a bit to look similar to all of the other config files
+Revision 2781b69 - Thu, 2 Jan 2014 11:44:18 -0500 - Add an explicit privilege for os_config's modify
+Revision 1e502c8 - Thu, 2 Jan 2014 11:41:49 -0500 - Update os_config
+Revision 004c4cb - Thu, 2 Jan 2014 11:03:33 -0500 - Move modules out of extras that dont have external dependencies
+Revision 072202c - Thu, 2 Jan 2014 10:56:57 -0500 - Have db_old load news.db too
+Revision 595dad4 - Wed, 1 Jan 2014 20:48:38 -0500 - Update copyright to 2014. This was done with: find include/ src/ lang/ docs/ modules/ *.* Config -exec sed -i 's/-20.. Anope Team/-2014 Anope Team/i' {} \;
+Revision a374e24 - Wed, 1 Jan 2014 16:21:38 -0500 - Make inspircds module class names not conflict because it confuses OSX
+Revision 6e6543d - Tue, 31 Dec 2013 16:12:21 -0500 - I don't think this OnBotKick to hold channels is necessary anymore as Sync should cover everything now, and this causes weird things when the last user in a channel kicks themselves out using the bot. Also handle users rejoining a channel while its held better.
+Revision 6124af6 - Tue, 31 Dec 2013 15:31:56 -0500 - Show the command name and not service name in the access denied log messages
+Revision f21b40b - Mon, 30 Dec 2013 10:50:15 -0500 - Set last_realname in m_ldap_authentication when new nicks are registered
+Revision 567700b - Mon, 30 Dec 2013 10:42:07 -0500 - Also have m_ldap_authentication disable nick grouping if registration is disabled
+Revision 3b80da9 - Mon, 30 Dec 2013 10:34:57 -0500 - Fix loading kicker ttb data
+Revision c519119 - Sun, 29 Dec 2013 05:27:36 +0100 - Don't expire ignores when NoExpire is enabled.
+Revision 780bc7c - Sat, 28 Dec 2013 23:28:30 +0100 - Do not translate command parameters that do not have translatable strings in them, or are not meant to be translated in the first place.
+Revision 3d12752 - Sat, 28 Dec 2013 09:39:16 -0500 - Fix naming collision between modes +g and +G on inspircd, rename the common badwords censor mode to censor
+Revision 9c0ceed - Fri, 27 Dec 2013 17:24:52 -0500 - Readd channel description to ns alist output
+Revision 187973c - Fri, 27 Dec 2013 17:20:47 -0500 - Allow inverting opertype privs and commands, to make them behave like the log settings
+Revision 072631a - Fri, 27 Dec 2013 17:15:07 -0500 - Fix forbid add message to show the correct type
+Revision b638b65 - Fri, 27 Dec 2013 17:12:01 -0500 - Fix crash when channels are registered that do not exist by non users
+Revision 0fb2b60 - Thu, 26 Dec 2013 21:06:26 -0500 - Fix xmlrpc dochannel example
+Revision 16f3f0c - Thu, 26 Dec 2013 21:06:07 -0500 - Don't leak ldap results
+Revision b28db7b - Thu, 26 Dec 2013 17:33:06 -0500 - Fix crash with badwords of type 'end' and possibly when messages contain only control codes. Also fix matching single words at the beginning of lines.
+Revision 9bf9cfc - Thu, 26 Dec 2013 16:08:56 -0500 - If using db_flatfile:fork, don't allow multiple saves to happen at one time on shutdown/restart wait for any pending saves to finish
+Revision 0c9750a - Thu, 26 Dec 2013 15:19:48 -0500 - Default the founder privilege to level 10000 as I had originally intended. Document set fonder usage in cs_levels help.
+Revision 69c5aec - Thu, 26 Dec 2013 19:44:41 +0100 - updated the extras script to find the cmake binary installed by ./Config
+Revision 59c3c13 - Thu, 26 Dec 2013 18:46:20 +0100 - m_chanstats: 1) fixed the SASET message 2) decreased the size of some VARCHAR fields, this hopefully fixes the 'key too long' error on some systems.
+Revision 5829d7d - Thu, 26 Dec 2013 12:06:39 -0500 - Add a config option for whether or not to reset the TS of persistent channels to their registration date
+Revision 2f29c13 - Thu, 26 Dec 2013 11:39:35 -0500 - Fix not setting the persist flag on newly registered channels when the permanent channel mode is set prior to registering or during registration
+Revision fc0e826 - Thu, 26 Dec 2013 08:02:19 -0500 - Fix dropping channels in the webpanel
+Revision 19eccf0 - Wed, 25 Dec 2013 15:16:04 -0500 - Fix setting english language in db_old, document how not setting defaultlanguage really works
+Revision dbf5106 - Wed, 25 Dec 2013 14:29:41 -0500 - Fix sqline on hybrid
+Revision 3029a2d - Tue, 24 Dec 2013 20:58:06 -0500 - Don't epxire forbids when noexpire mode is on
+Revision 53df61b - Tue, 24 Dec 2013 20:48:09 -0500 - Make webcpanel's nickserv alist behave more like /ns alist
+Revision 7d27689 - Tue, 24 Dec 2013 20:20:47 -0500 - Set a description for the resend command
+Revision 421e194 - Tue, 24 Dec 2013 18:19:44 -0500 - If last usermask and last realhost are the same, don't show both because duh
+Revision c442bc1 - Sun, 22 Dec 2013 08:37:49 -0500 - Do not allow /cs clone access to add duplicate masks to the access list or allow growing the list pass accessmax. Fix reading botservs case sensitive config option. Give a better error message when trying to clone badwords if there is no botserv.
+Revision 1c02961 - Fri, 20 Dec 2013 22:57:58 -0500 - Anope 2.0.0-rc1 Release
+Revision 268d529 - Fri, 20 Dec 2013 22:57:56 -0500 - Update version.log
 Revision 4bc4b98 - Fri, 20 Dec 2013 22:56:38 -0500 - Regenerate language files
 Revision e8b4260 - Fri, 20 Dec 2013 22:56:34 -0500 - Update Changes and Changes.conf
 Revision e792865 - Fri, 20 Dec 2013 20:24:40 -0500 - Fix reading unconfirmed expire config value when register type is set to mail

docs/Changes.conf

@@ -2,6 +2,7 @@ Anope Version 2.0.0
 -------------------
 options:passlen, enforceruser, enforcerhost, releasetimeout, and guestnickprefix moved to nickserv's module configuration
 options:hideregisteredcommands added
+m_ssl renamed to m_ssl_openssl
 
 Anope Version 1.9.9
 -------------------

docs/INSTALL

@@ -44,6 +44,10 @@ Note: You should also read the README and FAQ files!
     Next, unpack the package in your home directory, and go into the created
     directory.
 
+    If there are any extra modules you want to enable, such as m_mysql, run
+    the 'extras' script to enable them. If you do not know you can come back
+    later and enable them.
+
     Now type ./Config to start the configuration script. It will ask you a
     few questions, and figure out how to compile Anope on your system. If
     you are unsure about the answer to a question, use the default value.
@@ -63,20 +67,17 @@ Note: You should also read the README and FAQ files!
     cause trouble on your network if passwords are not encrypted, or read
     the memos of any user.
 
-    If you see errors during this process, please mail us with the *complete*
-    error output, and don't forget to mention your OS, compiler and C++ library
-    versions.
-
-    Now go into the data directory (by default, ~/services/data). Copy the example
+    Now go into the conf directory (by default, ~/services/conf). Copy the example
     configuration file (example.conf) to services.conf, and open the latter
     with your favorite text editor. It contains all the configuration
     directives Anope will use at startup. Read the instructions contained in
     the file carefully. Using the default values is NOT a good idea, and will
     most likely not work!
 
-    If you need help, you should subscribe to the Anope mailing list and mail
-    there to get help from other users. See the README file for more
-    information.
+    If you need help, you should visit http://forum.anope.org/ or #anope on
+    irc.anope.org. Provide *complete* error output, along with other relevant 
+    information eg. OS, compiler and C++ library versions.
+    See the README file for more information.
 
 2) Upgrading Anope
 
@@ -130,7 +131,7 @@ Note: You should also read the README and FAQ files!
     still running, and restart it if not.
 
     First rename the example.chk script that is in Anope path (by default,
-    this is ~/services/data) to services.chk and edit it. You'll need to 
+    this is ~/services/conf) to services.chk and edit it. You'll need to 
     modify the CONFIGURATION part of the file. Then ensure that the file is 
     marked as executable by typing chmod +x services.chk, and try to launch the
     script to see if it works (Anope must not be running when you do this ;))
@@ -139,7 +140,7 @@ Note: You should also read the README and FAQ files!
     This will open the default text editor with the crontab file. Enter the
     following (with correct path):
 
-        */5 * * * * /home/ircd/services/data/services.chk >/dev/null 2>&1
+        */5 * * * * /home/ircd/services/conf/services.chk >/dev/null 2>&1
 
     The */5 at the beginning means "check every 5 minutes". You may replace
     the 5 with other another number if you want (but less than 60). Consult

docs/IRCD

@@ -1,202 +0,0 @@
-How To Add IRCd Support
------------------------
-
-1) Files to Edit
-2) The Code
-3) The IRCDVar struct
-4) Modes
-5) Functions / Events
-6) CAPAB/PROTOCTL 
-7) IRCDProto Class
-
-1) Files to Edit
-
-    When preparing to add supprt to Anope for your IRCd, you need to edit
-    the following files
-
-    A) Make a copy of the .cpp file of the IRCd that matches the IRCd that
-       you are attempting to add support for best.
-    B) Add your IRCd into the supported IRCds in example.conf
-
-2) The Code
-
-    Here is where the code of the .cpp file comes in. Be prepared to spend at
-    least an hour, if not longer, going over the code and getting it right;
-    Especially if you are setting up an ircd that is completely different
-    than the one you used as a base. This section covers the majority of the
-    code that is in use. 
-
-    The first bit of code you will face is the IRCDVar structure, This is one
-    of two structs which holds your IRCd information; This allows you to quickly
-    setup your specific ircd.
-
-        IRCDVar myIrcd[] = { };
-
-    This struct contains your basic IRCd functions. Your base source file has
-    the list of all available variables; note that you should not swap any
-    around, or you will break stuff. Here is a brief description of the usage
-    of each.
-
-    1) Name: This member tells Anope about the IRCD's name. It may contain
-             text about it's name and version. This is used to identify the
-             build on startup.
-
-    2) Pseudo Client Mode: This is the user mode set by Anope on all BotServ
-                           bots. Normally you want this to be a some form of
-                           service or bot flag; you can use + for no mode at
-                           all.
-
-    3) Max Channelmode Symbols: This is the total number of possible channel
-                                 modes that can appear before a nick. Do
-                                 remember to count each possible mode, so +ov
-                                 is 2.
-
-    4) SVSNICK: Can the ircd use SVSNICK to change some ones nick? Otherwise,
-                 KILL is used. Use 1 for yes, 0 for no.
-
-    5) VHOST: Can a user's host be changed on the fly? Enabling this allow
-               HostServ online. Use 1 for yes, 0 for no.
-
-    6) SNLINE: Does the IRCd support realname (geocs) bans? Use 1 for yes,
-                0 for no.
-
-    7) SQLINE: Does the IRCd support nick bans? Use 1 for yes, 0 for no.
-
-    8) SZLINE: Does the IRCd support SZLINES? Use 1 for yes, 0 for no.
-
-    10) Join to Message: Services must join a channel to send any message to
-                         that channel (cannot override +n). Use 1 for yes,
-                         0 for no.
-
-    11) SQline Channels: The IRCd's supports banning channel names via
-                         SQLINES. Use 1 for yes, 0 for no.
-
-    12) Quit On Kill: When we (SVS)KILL a user, does the IRCd send back a
-                      QUIT message for that user? Use 1 for yes, 0 for no.
-
-    13) SVSMODE UNBAN: We can use SVSMODE to unban hosts from a channel. Use
-                    1 for yes, 0 for no.
-
-    14) Reverse: We can do a reverse check when unbanning. For use with 
-                 DreamForge based IRCd's. Use 1 for yes, 0 for no.
-
-    15) vIdent: Support for including a user's ident in their vHost. Use
-                1 for yes, 0 for no.
-
-    16) SVSHOLD: Support for temporarily 'holding' a nick, instead of using
-                 a nick enforcer client. Use 1 for yes, 0 for no.
-
-    17) TS on MODE: We need to send a timestamp when modes are being changed.
-                    Use 1 for yes, 0 for no.
-
-    18) Umode: We can use OperServ to change a user's mode. Use 1 for yes,
-               0 for no.
-
-    19) OMODE: We can use OperServ to give some user a temporary O:LINE.
-               Use 1 for yes, 0 for no.
-
-    20) No Knock Requires +i: Does the No Knock channel mode require invite
-                              only channels? Use 1 for yes, 0 for no.
-    
-    21) SVSMODE UCMODE: Can we clear user channel modes with SVSMODE? Use
-                        1 for yes, 0 for no.
-
-    22) SGline Enforce: Does the IRCd enforce SNLINES for us or do we need to
-                        do so? Use 1 for yes, 0 for no.
-
-    23) TS6: Does the IRCd support TS6? Use 1 for yes, 0 for no.
-
-    24) Global TLD Prefix: Prefix used to send global messages, should probably
-                           be "$"
-
-    25) Max Modes: The max number of mode changes we can send in one line
-
-3) Modes 
-
-   Anope is told about modes in the protocol module.
-   For the most part, the syntax for adding channel and user modes are:
-   
-   ModeManager::AddUserMode(new UserMode(UMODE_NETADMIN, "UMODE_NETADMIN", 'N'));
-   Where 'N' is the char for the mode, and UMODE_NETADMIN shows what the
-   mode does. Or:
-
-   ModeManager::AddChannelMode(new ChannelMode(CMODE_BLOCKCOLOR, "CMODE_BLOCKCOLOR", 'c'));
-   Where 'c' is the char for the mode and CMODE_BLOCKCOLOR shows what
-   the mode does
-
-   A full list of valid mode names for the second param can be found
-   in services.h in the enum for ChannelModeName and UserModeName
-   If necessary, you can add additional modes to this list.
-
-   Adding simple modes with parameters is similar, instead adding a
-   'new ChannelMode', use 'new ChannelModeParam', set the third optional
-   arg of ChannelModeParam to false if the param should NOT be sent when unsetting
-   it. Eg:
-
-   ModeManager::AddChannelMode(new ChannelModeParam(CMODE_JOINFLOOD, "CMODE_JOINFLOOD", 'j', true));
-
-   Anope will internally track the params, and they can be retrieved through
-   Channel::GetParam();
-
-   If you want to make param validity checking for a mode, you must create a new
-   class which inherits from ChannelModeParam and overload the IsValid function.
-   Modes CMODE_OPERONLY, CMODE_ADMINONLY, and CMODE_REGISTERED already exist
-   internally as classes, to overload the CanSet function to disable non opers
-   from mlocking (or in CMODE_REGISTERED's case, anyone) from setting them.
-   This should be added like:
-
-   ModeManager::AddChannelMode(new ChannelModeOper('O'));
-
-4) Functions and Events
-
-    A brief word about functions and events. All events are captured by creating a Message struct
-    with the name of the message and the callback function:
-
-    Message my_message("MESSAGE", do_my_messsage);
-
-    Each message should have a message handler if its important enough to be
-    processed by services. All event functions should be formed like this:
-
-	bool do_my_message(const Anope::string &source, const std::vector<Anope::string> &params)
-        {
-		return true;
-        }
-
-    They will receive the source; this can be empty at times depending on the
-    event. Next, params holds the arguments for the event. Events are likely to
-    pass to various upper level event handlers; see the previous ircd source for
-    how they handle these events.
-
-5) CAPAB/PROTOCTL
-
-    Most IRCDs send a CAPAB or PROTOCTL line so that they can work out what
-    the other end of the connection is capable of doing. The protocol module should
-    handle all of these without the cores knowledge with the exception of the following:
-    
-       --------------------------------------------------------------------------
-       Define          |  Description
-       ----------------|---------------------------------------------------------
-       CAPAB_NOQUIT    |  NOQUIT protocol support
-       CAPAB_TSMODE    |  Chanmodes are timestamped
-       CAPAB_UNCONNECT |  UNCONNECT protocol support
-       CAPAB_QS        |  Quitstorm - same as NOQUIT
-
-   You can override the default OnCapab method in IRCdMessage if required.
-
-6) IRCDProto Class
-
-    The IRCDProto class is set up like:
-
-    class MyIRCdProto : public IRCDProto { } ircdproto;
-
-    And told to Anope through the
-
-    pmodule_ircd_proto(&ircd_proto);
-
-    function.
-
-    This is used for sending out specific messages from Anope to your IRCd.
-    A list of all of the valid function names to overload and their args
-    are in services.h. If the protocol module you are editing is similar enough
-    to the IRCd you are adding support for, many of these probably won't need to
-    be changed.

docs/README

@@ -1,7 +1,7 @@
 Anope -- a set of IRC services for IRC networks
 -----------------------------------------------
 
-Anope is          2003-2013 Anope Team    <team@anope.org>.
+Anope is          2003-2014 Anope Team    <team@anope.org>.
 Based on Epona    2000-2002 PegSoft       <epona@pegsoft.net>.
 Based on Services 1996-1999 Andrew Church <achurch@achurch.org>.
 

docs/WIN32.txt

@@ -71,9 +71,10 @@ Anope for Windows
        our IRC Support channel for assistance.
 
        Some Anope modules require third party libraries, such as m_mysql and
-       m_ssl. If these libraries are installed in nonstandard locations, cmake
-       will probably not find them and should be told where they are by passing
-       additional search paths to the last question in Config, such as:
+       the SSL modules. If these libraries are installed in nonstandard
+       locations, cmake will probably not find them and should be told where
+       they are by passing additional search paths to the last question in
+       Config, such as:
 
        -DEXTRA_INCLUDE:STRING=c:/openssl/include;c:/mysql/include
        -DEXTRA_LIBS:STRING=c:/openssl/lib;c:/mysql/lib

docs/XMLRPC/xmlrpc.php

@@ -1,7 +1,7 @@
 <?php
 /* XMLRPC Functions
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  */
@@ -74,7 +74,7 @@ class AnopeXMLRPC
 	 */
 	function DoChannel($Channel)
 	{
-		return $this->RunXMLRPC("channel", NULL);
+		return $this->RunXMLRPC("channel", array($Channel));
 	}
 
 	/* Like DoChannel(), but different.

extras

@@ -147,8 +147,13 @@ while (1)
 	chop($input); # remove the trailing \n from the user input
 
 	if ($input eq "q") {
-		if (-e "build") {
-			system("cmake", "build/.");
+		if (-e "build/CMakeFiles") {
+			if (-e "cmake-bin") {
+				my $cmake_path = `find cmake-bin -name cmake -print0`;
+				system($cmake_path, "build/.");
+			} else {
+				system("cmake", "build/.");
+			}
 			print "\nNow cd build, then run make to build Anope.\n\n";
 		} else {
 			print "\nBuild directory not found. You should run ./Config now.\n\n"

include/access.h

@@ -1,6 +1,6 @@
 /*
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

include/account.h

@@ -1,6 +1,6 @@
 /*
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

include/anope.h

@@ -1,6 +1,6 @@
 /*
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
@@ -115,6 +115,7 @@ namespace Anope
 		 * The following functions return the various types of strings.
 		 */
 		inline const char *c_str() const { return this->_string.c_str(); }
+		inline const char *data() const { return this->_string.data(); }
 		inline std::string &str() { return this->_string; }
 		inline const std::string &str() const { return this->_string; }
 		inline ci::string ci_str() const { return ci::string(this->_string.c_str()); }
@@ -159,24 +160,24 @@ namespace Anope
 		 * Trim leading and trailing white spaces from the string.
 		 */
 
-		inline string& ltrim()
+		inline string& ltrim(const Anope::string &what = " \t\r\n")
 		{
-			while (!this->_string.empty() && isspace(this->_string[0]))
+			while (!this->_string.empty() && what.find(this->_string[0]) != Anope::string::npos)
 				this->_string.erase(this->_string.begin());
 			return *this;
 		}
 
-		inline string& rtrim()
+		inline string& rtrim(const Anope::string &what = " \t\r\n")
 		{
-			while (!this->_string.empty() && isspace(this->_string[this->_string.length() - 1]))
+			while (!this->_string.empty() && what.find(this->_string[this->_string.length() - 1]) != Anope::string::npos)
 				this->_string.erase(this->_string.length() - 1);
 			return *this;
 		}
 
-		inline string& trim()
+		inline string& trim(const Anope::string &what = " \t\r\n")
 		{
-			this->ltrim();
-			this->rtrim();
+			this->ltrim(what);
+			this->rtrim(what);
 			return *this;
 		}
 
@@ -621,7 +622,7 @@ class commasepstream : public sepstream
  public:
 	/** Initialize with comma seperator
 	 */
-	commasepstream(const Anope::string &source) : sepstream(source, ',') { }
+	commasepstream(const Anope::string &source, bool allowempty = false) : sepstream(source, ',', allowempty) { }
 };
 
 /** A derived form of sepstream, which seperates on spaces

include/base.h

@@ -1,7 +1,7 @@
 /*
  *
  * Copyright (C) 2008-2011 Adam <Adam@anope.org>
- * Copyright (C) 2008-2013 Anope Team <team@anope.org>
+ * Copyright (C) 2008-2014 Anope Team <team@anope.org>
  *
  * Please read COPYING and README for further details.
  *

include/bots.h

@@ -1,7 +1,7 @@
 /*
  *
  * Copyright (C) 2008-2011 Robin Burchell <w00t@inspircd.org>
- * Copyright (C) 2008-2013 Anope Team <team@anope.org>
+ * Copyright (C) 2008-2014 Anope Team <team@anope.org>
  *
  * Please read COPYING and README for further details.
  *

include/channels.h

@@ -1,6 +1,6 @@
 /* Channel support
  *
- * (C) 2008-2013 Anope Team
+ * (C) 2008-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

include/commands.h

@@ -1,6 +1,6 @@
 /* Declarations for command data.
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

include/config.h

@@ -1,6 +1,6 @@
 /*
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

include/defs.h

@@ -1,6 +1,6 @@
 /*
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
@@ -52,4 +52,5 @@ struct Exception;
 struct MemoInfo;
 struct ModeLock;
 struct Oper;
+namespace SASL { struct Message; }
 

include/extensible.h

@@ -1,6 +1,6 @@
 /*
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

include/hashcomp.h

@@ -1,7 +1,7 @@
 /*
  *
  * Copyright (C) 2002-2011 InspIRCd Development Team
- * Copyright (C) 2009-2013 Anope Team <team@anope.org>
+ * Copyright (C) 2009-2014 Anope Team <team@anope.org>
  *
  * Please read COPYING and README for further details.
  *

include/language.h

@@ -1,6 +1,6 @@
 /*
  *
- * (C) 2008-2013 Anope Team
+ * (C) 2008-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

include/lists.h

@@ -1,6 +1,6 @@
 /*
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

include/logger.h

@@ -1,6 +1,6 @@
 /*
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
@@ -92,7 +92,7 @@ class CoreExport Log
 
 	Log(BotInfo *b, const Anope::string &category = "");
 
-	Log(Module *m, const Anope::string &category = "");
+	Log(Module *m, const Anope::string &category = "", BotInfo *bi = NULL);
 
 	~Log();
 

include/mail.h

@@ -1,6 +1,6 @@
 /*
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

include/memo.h

@@ -1,6 +1,6 @@
 /*
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

include/messages.h

@@ -1,6 +1,6 @@
 /*
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

include/modes.h

@@ -1,7 +1,7 @@
 /* Mode support
  *
  * Copyright (C) 2008-2011 Adam <Adam@anope.org>
- * Copyright (C) 2008-2013 Anope Team <team@anope.org>
+ * Copyright (C) 2008-2014 Anope Team <team@anope.org>
  *
  * Please read COPYING and README for further details.
  */

include/module.h

@@ -1,6 +1,6 @@
 /*
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

include/modules.h

@@ -1,6 +1,6 @@
 /* Modular support
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

include/modules/bs_badwords.h

@@ -1,6 +1,6 @@
 /* BotServ core functions
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

include/modules/bs_kick.h

@@ -1,6 +1,6 @@
 /* BotServ core functions
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

include/modules/cs_log.h

@@ -1,6 +1,6 @@
 /* ChanServ core functions
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

include/modules/cs_mode.h

@@ -1,6 +1,6 @@
 /* ChanServ core functions
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

include/modules/cs_suspend.h

@@ -1,20 +0,0 @@
-/* ChanServ core functions
- *
- * (C) 2003-2013 Anope Team
- * Contact us at team@anope.org
- *
- * Please read COPYING and README for further details.
- *
- * Based on the original code of Epona by Lara.
- * Based on the original code of Services by Andy Church.
- */
-
-struct CSSuspendInfo
-{
-	Anope::string chan, by, reason;
-	time_t time, expires;
-
-	virtual ~CSSuspendInfo() { }
- protected:
-	CSSuspendInfo() { }
-};

include/modules/dns.h

@@ -1,6 +1,6 @@
 /*
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

include/modules/encryption.h

@@ -1,6 +1,6 @@
 /*
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

include/modules/ns_cert.h

@@ -1,6 +1,6 @@
 /* NickServ core functions
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
@@ -60,3 +60,12 @@ struct NSCertList
 
 	virtual void Check() = 0;
 };
+
+class CertService : public Service
+{
+ public:
+	CertService(Module *c) : Service(c, "CertService", "certs") { }
+
+	virtual NickCore* FindAccountFromCert(const Anope::string &cert) = 0;
+};
+

include/modules/os_forbid.h

@@ -10,7 +10,7 @@ enum ForbidType
 	FT_SIZE
 };
 
-struct ForbidData : Serializable
+struct ForbidData
 {
 	Anope::string mask;
 	Anope::string creator;
@@ -19,9 +19,9 @@ struct ForbidData : Serializable
 	time_t expires;
 	ForbidType type;
 
-	ForbidData() : Serializable("ForbidData") { }
-	void Serialize(Serialize::Data &data) const anope_override;
-	static Serializable* Unserialize(Serializable *obj, Serialize::Data &data);
+	virtual ~ForbidData() { }
+ protected:
+	ForbidData() : created(0), expires(0) { }
 };
 
 class ForbidService : public Service
@@ -33,6 +33,8 @@ class ForbidService : public Service
 
 	virtual void RemoveForbid(ForbidData *d) = 0;
 
+	virtual ForbidData* CreateForbid() = 0;
+
 	virtual ForbidData *FindForbid(const Anope::string &mask, ForbidType type) = 0;
 
 	virtual std::vector<ForbidData *> GetForbids() = 0;
@@ -40,43 +42,5 @@ class ForbidService : public Service
 
 static ServiceReference<ForbidService> forbid_service("ForbidService", "forbid");
 
-void ForbidData::Serialize(Serialize::Data &data) const
-{
-	data["mask"] << this->mask;
-	data["creator"] << this->creator;
-	data["reason"] << this->reason;
-	data["created"] << this->created;
-	data["expires"] << this->expires;
-	data["type"] << this->type;
-}
-
-Serializable* ForbidData::Unserialize(Serializable *obj, Serialize::Data &data)
-{
-	if (!forbid_service)
-		return NULL;
-
-	ForbidData *fb;
-	if (obj)
-		fb = anope_dynamic_static_cast<ForbidData *>(obj);
-	else
-		fb = new ForbidData;
-
-	data["mask"] >> fb->mask;
-	data["creator"] >> fb->creator;
-	data["reason"] >> fb->reason;
-	data["created"] >> fb->created;
-	data["expires"] >> fb->expires;
-	unsigned int t;
-	data["type"] >> t;
-	fb->type = static_cast<ForbidType>(t);
-
-	if (t > FT_SIZE - 1)
-		return NULL;
-
-	if (!obj)
-		forbid_service->AddForbid(fb);
-	return fb;
-}
-
 #endif
 

include/modules/os_ignore.h

@@ -1,6 +1,6 @@
 /* OperServ ignore interface
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
@@ -10,70 +10,36 @@
  */
 
 
-struct IgnoreData : Serializable
+struct IgnoreData
 {
 	Anope::string mask;
 	Anope::string creator;
 	Anope::string reason;
 	time_t time; /* When do we stop ignoring them? */
 
-	IgnoreData() : Serializable("IgnoreData") { }
-	void Serialize(Serialize::Data &data) const anope_override;
-	static Serializable* Unserialize(Serializable *obj, Serialize::Data &data);
+	virtual ~IgnoreData() { }
+ protected:
+	IgnoreData() : time(0) { }
 };
 
 class IgnoreService : public Service
 {
  protected:
-	std::list<IgnoreData> ignores;
-
 	IgnoreService(Module *c) : Service(c, "IgnoreService", "ignore") { }
 	
  public:
-	virtual IgnoreData* AddIgnore(const Anope::string &mask, const Anope::string &creator, const Anope::string &reason, time_t delta = Anope::CurTime) = 0;
+	virtual void AddIgnore(IgnoreData *) = 0;
 
-	virtual bool DelIgnore(const Anope::string &mask) = 0;
+	virtual void DelIgnore(IgnoreData *) = 0;
 
-	inline void ClearIgnores() { this->ignores.clear(); }
+	virtual void ClearIgnores() = 0;
+
+	virtual IgnoreData *Create() = 0;
 
 	virtual IgnoreData *Find(const Anope::string &mask) = 0;
 
-	inline std::list<IgnoreData> &GetIgnores() { return this->ignores; }
+	virtual std::vector<IgnoreData *> &GetIgnores() = 0;
 };
 
 static ServiceReference<IgnoreService> ignore_service("IgnoreService", "ignore");
 
-void IgnoreData::Serialize(Serialize::Data &data) const
-{
-	data["mask"] << this->mask;
-	data["creator"] << this->creator;
-	data["reason"] << this->reason;
-	data["time"] << this->time;
-}
-
-Serializable* IgnoreData::Unserialize(Serializable *obj, Serialize::Data &data)
-{
-	if (!ignore_service)
-		return NULL;
-	
-	if (obj)
-	{
-		IgnoreData *ign = anope_dynamic_static_cast<IgnoreData *>(obj);
-		data["mask"] >> ign->mask;
-		data["creator"] >> ign->creator;
-		data["reason"] >> ign->reason;
-		data["time"] >> ign->time;
-		return ign;
-	}
-
-	Anope::string smask, screator, sreason;
-	time_t t;
-
-	data["mask"] >> smask;
-	data["creator"] >> screator;
-	data["reason"] >> sreason;
-	data["time"] >> t;
-
-	return ignore_service->AddIgnore(smask, screator, sreason, t);
-}
-

include/modules/os_news.h

@@ -23,14 +23,14 @@ struct NewsItem : Serializable
 	time_t time;
 
 	NewsItem() : Serializable("NewsItem") { }
-	void Serialize(Serialize::Data &data) const anope_override;
-	static Serializable* Unserialize(Serializable *obj, Serialize::Data &data);
 };
 
 class NewsService : public Service
 {
  public:
 	NewsService(Module *m) : Service(m, "NewsService", "news") { }
+
+	virtual NewsItem *CreateNewsItem() = 0;
 	
 	virtual void AddNewsItem(NewsItem *n) = 0;
 	
@@ -41,36 +41,5 @@ class NewsService : public Service
 
 static ServiceReference<NewsService> news_service("NewsService", "news");
 
-void NewsItem::Serialize(Serialize::Data &data) const
-{
-	data["type"] << this->type;
-	data["text"] << this->text;
-	data["who"] << this->who;
-	data["time"] << this->time;
-}
-
-Serializable* NewsItem::Unserialize(Serializable *obj, Serialize::Data &data)
-{
-	if (!news_service)
-		return NULL;
-
-	NewsItem *ni;
-	if (obj)
-		ni = anope_dynamic_static_cast<NewsItem *>(obj);
-	else
-		ni = new NewsItem();
-
-	unsigned int t;
-	data["type"] >> t;
-	ni->type = static_cast<NewsType>(t);
-	data["text"] >> ni->text;
-	data["who"] >> ni->who;
-	data["time"] >> ni->time;
-
-	if (!obj)
-		news_service->AddNewsItem(ni);
-	return ni;
-}
-
 #endif // OS_NEWS
 

include/modules/redis.h

@@ -1,6 +1,6 @@
 /*
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

include/modules/sasl.h

@@ -0,0 +1,115 @@
+/*
+ *
+ * (C) 2014 Anope Team
+ * Contact us at team@anope.org
+ *
+ * Please read COPYING and README for further details.
+ */
+
+namespace SASL
+{
+	struct Message
+	{
+		Anope::string source;
+		Anope::string target;
+		Anope::string type;
+		Anope::string data;
+		Anope::string ext;
+	};
+
+	class Mechanism;
+	struct Session;
+
+	class Service : public ::Service
+	{
+	 public:
+		Service(Module *o) : ::Service(o, "SASL::Service", "sasl") { }
+
+		virtual void ProcessMessage(const Message &) = 0;
+
+		virtual Anope::string GetAgent() = 0;
+
+		virtual Session* GetSession(const Anope::string &uid) = 0;
+
+		virtual void SendMessage(SASL::Session *session, const Anope::string &type, const Anope::string &data) = 0;
+
+		virtual void Succeed(Session *, NickCore *) = 0;
+		virtual void Fail(Session *) = 0;
+		virtual void SendMechs(Session *) = 0;
+		virtual void DeleteSessions(Mechanism *, bool = false) = 0;
+		virtual void RemoveSession(Session *) = 0;
+	};
+
+	static ServiceReference<SASL::Service> sasl("SASL::Service", "sasl");
+
+	struct Session
+	{
+		time_t created;
+		Anope::string uid;
+		Reference<Mechanism> mech;
+
+		Session(Mechanism *m, const Anope::string &u) : created(Anope::CurTime), uid(u), mech(m) { }
+		virtual ~Session()
+		{
+			if (sasl)
+				sasl->RemoveSession(this);
+		}
+	};
+
+	/* PLAIN, EXTERNAL, etc */
+	class Mechanism : public ::Service
+	{
+	 public:
+		Mechanism(Module *o, const Anope::string &sname) : Service(o, "SASL::Mechanism", sname) { }
+
+		virtual Session* CreateSession(const Anope::string &uid) { return new Session(this, uid); }
+
+		virtual void ProcessMessage(Session *session, const Message &) = 0;
+
+		virtual ~Mechanism()
+		{
+			if (sasl)
+				sasl->DeleteSessions(this, true);
+		}
+	};
+
+	class IdentifyRequest : public ::IdentifyRequest
+	{
+		Anope::string uid;
+
+	 public:
+		IdentifyRequest(Module *m, const Anope::string &id, const Anope::string &acc, const Anope::string &pass) : ::IdentifyRequest(m, acc, pass), uid(id) { }
+
+		void OnSuccess() anope_override
+		{
+			if (!sasl)
+				return;
+
+			NickAlias *na = NickAlias::Find(GetAccount());
+			if (!na)
+				return OnFail();
+
+			Session *s = sasl->GetSession(uid);
+			if (s)
+			{
+				sasl->Succeed(s, na->nc);
+				delete s;
+			}
+		}
+
+		void OnFail() anope_override
+		{
+			if (!sasl)
+				return;
+
+			Session *s = sasl->GetSession(uid);
+			if (s)
+			{
+				sasl->Fail(s);
+				delete s;
+			}
+
+			Log(Config->GetClient("NickServ")) << "A user failed to identify for account " << this->GetAccount() << " using SASL";
+		}
+	};
+}

include/modules/set_misc.h

@@ -0,0 +1,17 @@
+/*
+ * (C) 2003-2014 Anope Team
+ * Contact us at team@anope.org
+ *
+ * Please read COPYING and README for further details.
+ */
+
+struct MiscData
+{
+	Anope::string object;
+	Anope::string name;
+	Anope::string data;
+
+	MiscData() { }
+	virtual ~MiscData() { }
+};
+

include/modules/sql.h

@@ -1,5 +1,5 @@
 /*
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

include/modules/suspend.h

@@ -1,6 +1,5 @@
-/* NickServ core functions
- *
- * (C) 2003-2013 Anope Team
+/*
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
@@ -9,12 +8,11 @@
  * Based on the original code of Services by Andy Church.
  */
 
-struct NSSuspendInfo
+struct SuspendInfo
 {
-	Anope::string nick, by, reason;
+	Anope::string what, by, reason;
 	time_t when, expires;
 
-	virtual ~NSSuspendInfo() { }
- protected:
-	NSSuspendInfo() { }
+	SuspendInfo() { }
+	virtual ~SuspendInfo() { }
 };

include/opertype.h

@@ -1,6 +1,6 @@
 /*
  * Copyright (C) 2008-2011 Robin Burchell <w00t@inspircd.org>
- * Copyright (C) 2008-2013 Anope Team <team@anope.org>
+ * Copyright (C) 2008-2014 Anope Team <team@anope.org>
  *
  * Please read COPYING and README for further details.
  *

include/protocol.h

@@ -1,6 +1,6 @@
 /*
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
@@ -204,7 +204,7 @@ class CoreExport IRCDProto : public Service
 
 	virtual void SendNumeric(int numeric, const Anope::string &dest, const char *fmt, ...);
 
-	virtual void SendLogin(User *u) = 0;
+	virtual void SendLogin(User *u, NickAlias *na) = 0;
 	virtual void SendLogout(User *u) = 0;
 
 	/** Send a channel creation message to the uplink.
@@ -217,6 +217,9 @@ class CoreExport IRCDProto : public Service
 	 */
 	virtual void SendOper(User *u);
 
+	virtual void SendSASLMessage(const SASL::Message &) { }
+	virtual void SendSVSLogin(const Anope::string &uid, const Anope::string &acc) { }
+
 	virtual bool IsNickValid(const Anope::string &);
 	virtual bool IsChannelValid(const Anope::string &);
 	virtual bool IsIdentValid(const Anope::string &);

include/regchannel.h

@@ -1,6 +1,6 @@
 /*
  *
- * (C) 2008-2013 Anope Team
+ * (C) 2008-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

include/regexpr.h

@@ -1,6 +1,6 @@
 /*
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

include/serialize.h

@@ -1,6 +1,6 @@
 /*
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

include/servers.h

@@ -1,6 +1,6 @@
 /*
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

include/service.h

@@ -1,6 +1,6 @@
 /*
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
@@ -20,7 +20,7 @@
 /** Anything that inherits from this class can be referred to
  * using ServiceReference. Any interfaces provided by modules,
  * such as commands, use this. This is also used for modules
- * that publish a service (m_ssl, etc).
+ * that publish a service (m_ssl_openssl, etc).
  */
 class CoreExport Service : public virtual Base
 {
@@ -148,7 +148,7 @@ class ServiceReference : public Reference<T>
 			 * creates its own service type (that other modules must include the header file
 			 * for), as the core is not compiled with it so there is no RTTI for it.
 			 */
-			this->ref = static_cast<T *>(Service::FindService(this->type, this->name));
+			this->ref = static_cast<T *>(::Service::FindService(this->type, this->name));
 			if (this->ref)
 				this->ref->AddReference(this);
 		}

include/services.h

@@ -1,6 +1,6 @@
 /*
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

include/socketengine.h

@@ -1,6 +1,6 @@
 /*
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
@@ -41,6 +41,11 @@ class CoreExport SocketEngine
 	/** Read from sockets and do things
 	 */
 	static void Process();
+
+	static int GetLastError();
+	static void SetLastError(int);
+
+	static bool IgnoreErrno();
 };
 
 #endif // SOCKETENGINE_H

include/sockets.h

@@ -1,6 +1,6 @@
 /*
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
@@ -347,7 +347,7 @@ class CoreExport BinarySocket : public virtual Socket
 
 	/** Write data to the socket
 	 * @param buffer The data to write
-	 * @param l The length of the data
+	 * @param l The length of the data; if 0 then this function returns without doing anything
 	 */
 	virtual void Write(const char *buffer, size_t l);
 	void Write(const char *message, ...);

include/threadengine.h

@@ -1,6 +1,6 @@
 /*
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

include/timers.h

@@ -1,6 +1,6 @@
 /* Timer include stuff.
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

include/uplink.h

@@ -1,6 +1,6 @@
 /*
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

include/users.h

@@ -1,7 +1,7 @@
 /*
  *
  * (C) 2008-2011 Robin Burchell <w00t@inspircd.org>
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
@@ -323,7 +323,7 @@ class CoreExport User : public virtual Base, public Extensible, public CommandRe
 	/** Check if the user is protected from kicks and negative mode changes
 	 * @return true or false
 	 */
-	bool IsProtected() const;
+	bool IsProtected();
 
 	/** Kill a user
 	 * @param source The user/server doing the kill

include/version.cpp

@@ -1,6 +1,6 @@
 /* Build bumper
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

include/xline.h

@@ -1,6 +1,6 @@
 /*
  *
- * (C) 2008-2013 Anope Team
+ * (C) 2008-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

modules/bs_autoassign.cpp

@@ -1,6 +1,6 @@
 /*
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

modules/commands/bs_assign.cpp

@@ -1,6 +1,6 @@
 /* BotServ core functions
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

modules/commands/bs_badwords.cpp

@@ -1,6 +1,6 @@
 /* BotServ core functions
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
@@ -286,7 +286,7 @@ class CommandBSBadwords : public Command
 			return;
 		}
 
-		bool casesensitive = Config->GetModule("botserv")->Get<bool>("casesensitive");
+		bool casesensitive = Config->GetModule(this->module)->Get<bool>("casesensitive");
 
 		for (unsigned i = 0, end = badwords->GetBadWordCount(); i < end; ++i)
 		{

modules/commands/bs_bot.cpp

@@ -1,6 +1,6 @@
 /* BotServ core functions
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

modules/commands/bs_botlist.cpp

@@ -1,6 +1,6 @@
 /* BotServ core functions
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

modules/commands/bs_control.cpp

@@ -1,6 +1,6 @@
 /* BotServ core functions
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

modules/commands/bs_info.cpp

@@ -1,6 +1,6 @@
 /* BotServ core functions
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

modules/commands/bs_kick.cpp

@@ -1,6 +1,6 @@
 /* BotServ core functions
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
@@ -104,7 +104,7 @@ struct KickerDataImpl : KickerData
 			for (int i = 0; sep.GetToken(tok) && i < TTB_SIZE; ++i)
 				try
 				{
-					ttb[i] = convertTo<int16_t>(tok);
+					kd->ttb[i] = convertTo<int16_t>(tok);
 				}
 				catch (const ConvertException &) { }
 
@@ -635,7 +635,7 @@ class CommandBSKickRepeat : public CommandBSKickBase
 
 		if (params[1].equals_ci("ON"))
 		{
-			const Anope::string &ttb = params[2],
+			const Anope::string &ttb = params.size() > 2 ? params[2] : "",
 						&times = params.size() > 3 ? params[3] : "";
 
 			if (!ttb.empty())
@@ -672,10 +672,10 @@ class CommandBSKickRepeat : public CommandBSKickBase
 			if (kd->ttb[TTB_REPEAT])
 				source.Reply(_("Bot will now kick for \002repeats\002 (users that say the\n"
 						"same thing %d times), and will place a ban after %d\n"
-						"kicks for the same user."), kd->repeattimes, kd->ttb[TTB_REPEAT]);
+						"kicks for the same user."), kd->repeattimes + 1, kd->ttb[TTB_REPEAT]);
 			else
 				source.Reply(_("Bot will now kick for \002repeats\002 (users that say the\n"
-					"same thing %d times)."), kd->repeattimes);
+					"same thing %d times)."), kd->repeattimes + 1);
 		}
 		else if (params[1].equals_ci("OFF"))
 		{
@@ -1038,8 +1038,8 @@ class BSKick : public Module
 
 	void check_ban(ChannelInfo *ci, User *u, KickerData *kd, int ttbtype)
 	{
-		/* Don't ban ulines */
-		if (u->server->IsULined())
+		/* Don't ban ulines or protected users */
+		if (u->IsProtected())
 			return;
 
 		BanData::Data &bd = this->GetBanData(u, ci->c);
@@ -1065,7 +1065,7 @@ class BSKick : public Module
 		va_list args;
 		char buf[1024];
 
-		if (!ci || !ci->bi || !ci->c || !u || u->server->IsULined() || !ci->c->FindUser(u))
+		if (!ci || !ci->bi || !ci->c || !u || u->IsProtected() || !ci->c->FindUser(u))
 			return;
 
 		Anope::string fmt = Language::Translate(u, message);
@@ -1324,73 +1324,81 @@ class BSKick : public Module
 			Anope::string nbuf = Anope::NormalizeBuffer(realbuf);
 			bool casesensitive = Config->GetModule("botserv")->Get<bool>("casesensitive");
 
-			for (unsigned i = 0; badwords && i < badwords->GetBadWordCount(); ++i)
-			{
-				const BadWord *bw = badwords->GetBadWord(i);
-
-				if (bw->type == BW_ANY && ((casesensitive && nbuf.find(bw->word) != Anope::string::npos) || (!casesensitive && nbuf.find_ci(bw->word) != Anope::string::npos)))
-					mustkick = true;
-				else if (bw->type == BW_SINGLE)
+			/* Normalize can return an empty string if this only conains control codes etc */
+			if (badwords && !nbuf.empty())
+				for (unsigned i = 0; i < badwords->GetBadWordCount(); ++i)
 				{
-					size_t len = bw->word.length();
+					const BadWord *bw = badwords->GetBadWord(i);
 
-					if ((casesensitive && bw->word.equals_cs(nbuf)) || (!casesensitive && bw->word.equals_ci(nbuf)))
+					if (bw->word.empty())
+						continue; // Shouldn't happen
+
+					if (bw->word.length() > nbuf.length())
+						continue; // This can't ever match
+
+					if (bw->type == BW_ANY && ((casesensitive && nbuf.find(bw->word) != Anope::string::npos) || (!casesensitive && nbuf.find_ci(bw->word) != Anope::string::npos)))
 						mustkick = true;
-					else if (nbuf.find(' ') == len && ((casesensitive && bw->word.equals_cs(nbuf)) || (!casesensitive && bw->word.equals_ci(nbuf))))
-						mustkick = true;
-					else
+					else if (bw->type == BW_SINGLE)
 					{
-						if (nbuf.rfind(' ') == nbuf.length() - len - 1 && ((casesensitive && nbuf.find(bw->word) == nbuf.length() - len) || (!casesensitive && nbuf.find_ci(bw->word) == nbuf.length() - len)))
+						size_t len = bw->word.length();
+
+						if ((casesensitive && bw->word.equals_cs(nbuf)) || (!casesensitive && bw->word.equals_ci(nbuf)))
+							mustkick = true;
+						else if (nbuf.find(' ') == len && ((casesensitive && bw->word.equals_cs(nbuf.substr(0, len))) || (!casesensitive && bw->word.equals_ci(nbuf.substr(0, len)))))
 							mustkick = true;
 						else
 						{
-							Anope::string wordbuf = " " + bw->word + " ";
+							if (len < nbuf.length() && nbuf.rfind(' ') == nbuf.length() - len - 1 && ((casesensitive && nbuf.find(bw->word) == nbuf.length() - len) || (!casesensitive && nbuf.find_ci(bw->word) == nbuf.length() - len)))
+								mustkick = true;
+							else
+							{
+								Anope::string wordbuf = " " + bw->word + " ";
+	
+								if ((casesensitive && nbuf.find(wordbuf) != Anope::string::npos) || (!casesensitive && nbuf.find_ci(wordbuf) != Anope::string::npos))
+									mustkick = true;
+							}
+						}
+					}
+					else if (bw->type == BW_START)
+					{
+						size_t len = bw->word.length();
+
+						if ((casesensitive && nbuf.substr(0, len).equals_cs(bw->word)) || (!casesensitive && nbuf.substr(0, len).equals_ci(bw->word)))
+							mustkick = true;
+						else
+						{
+							Anope::string wordbuf = " " + bw->word;
 
 							if ((casesensitive && nbuf.find(wordbuf) != Anope::string::npos) || (!casesensitive && nbuf.find_ci(wordbuf) != Anope::string::npos))
 								mustkick = true;
 						}
 					}
-				}
-				else if (bw->type == BW_START)
-				{
-					size_t len = bw->word.length();
-
-					if ((casesensitive && nbuf.substr(0, len).equals_cs(bw->word)) || (!casesensitive && nbuf.substr(0, len).equals_ci(bw->word)))
-						mustkick = true;
-					else
+					else if (bw->type == BW_END)
 					{
-						Anope::string wordbuf = " " + bw->word;
+						size_t len = bw->word.length();
 
-						if ((casesensitive && nbuf.find(wordbuf) != Anope::string::npos) || (!casesensitive && nbuf.find_ci(wordbuf) != Anope::string::npos))
+						if ((casesensitive && nbuf.substr(nbuf.length() - len).equals_cs(bw->word)) || (!casesensitive && nbuf.substr(nbuf.length() - len).equals_ci(bw->word)))
 							mustkick = true;
-					}
-				}
-				else if (bw->type == BW_END)
-				{
-					size_t len = bw->word.length();
+						else
+						{
+							Anope::string wordbuf = bw->word + " ";
 
-					if ((casesensitive && nbuf.substr(nbuf.length() - len).equals_cs(bw->word)) || (!casesensitive && nbuf.substr(nbuf.length() - len).equals_ci(bw->word)))
-						mustkick = true;
-					else
+							if ((casesensitive && nbuf.find(wordbuf) != Anope::string::npos) || (!casesensitive && nbuf.find_ci(wordbuf) != Anope::string::npos))
+								mustkick = true;
+						}
+					}
+
+					if (mustkick)
 					{
-						Anope::string wordbuf = bw->word + " ";
+						check_ban(ci, u, kd, TTB_BADWORDS);
+						if (Config->GetModule(me)->Get<bool>("gentlebadwordreason"))
+							bot_kick(ci, u, _("Watch your language!"));
+						else
+							bot_kick(ci, u, _("Don't use the word \"%s\" on this channel!"), bw->word.c_str());
 
-						if ((casesensitive && nbuf.find(wordbuf) != Anope::string::npos) || (!casesensitive && nbuf.find_ci(wordbuf) != Anope::string::npos))
-							mustkick = true;
+						return;
 					}
-				}
-
-				if (mustkick)
-				{
-					check_ban(ci, u, kd, TTB_BADWORDS);
-					if (Config->GetModule(me)->Get<bool>("gentlebadwordreason"))
-						bot_kick(ci, u, _("Watch your language!"));
-					else
-						bot_kick(ci, u, _("Don't use the word \"%s\" on this channel!"), bw->word.c_str());
-
-					return;
-				}
-			} /* for */
+				} /* for */
 		} /* if badwords */
 
 		UserData *ud = GetUserData(u, c);

modules/commands/bs_set.cpp

@@ -1,6 +1,6 @@
 /* BotServ core functions
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

modules/commands/cs_access.cpp

@@ -1,6 +1,6 @@
 /* ChanServ core functions
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
@@ -814,12 +814,12 @@ class CommandCSLevels : public Command
 					"functions to be changed. \002LEVELS DISABLE\002 (or \002DIS\002 for short)\n"
 					"disables an automatic feature or disallows access to a\n"
 					"function by anyone, INCLUDING the founder (although, the founder\n"
-					"can always reenable it).\n"
+					"can always reenable it). Use \002LEVELS SET founder\002 to make a level\n"
+					"founder only.\n"
 					" \n"
 					"\002LEVELS LIST\002 shows the current levels for each function or\n"
 					"group of functions. \002LEVELS RESET\002 resets the levels to the\n"
-					"default levels of a newly-created channel (see\n"
-					"\002HELP ACCESS LEVELS\002).\n"
+					"default levels of a newly-created channel.\n"
 					" \n"
 					"For a list of the features and functions whose levels can be\n"
 					"set, see \002HELP LEVELS DESC\002."), source.service->nick.c_str());

modules/commands/cs_akick.cpp

@@ -1,6 +1,6 @@
 /* ChanServ core functions
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

modules/commands/cs_ban.cpp

@@ -1,6 +1,6 @@
 /* ChanServ core functions
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

modules/commands/cs_clone.cpp

@@ -1,6 +1,6 @@
 /* ChanServ core functions
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
@@ -49,6 +49,13 @@ public:
 			source.Reply(CHAN_X_NOT_REGISTERED, target.c_str());
 			return;
 		}
+
+		if (ci == target_ci)
+		{
+			source.Reply(_("Cannot clone channel \002%s\002 to itself!"), target.c_str());
+			return;
+		}
+
 		if (!source.IsFounder(ci) || !source.IsFounder(target_ci))
 		{
 			if (!source.HasPriv("chanserv/administration"))
@@ -99,11 +106,25 @@ public:
 		}
 		else if (what.equals_ci("ACCESS"))
 		{
+			std::set<Anope::string> masks;
+			unsigned access_max = Config->GetModule("chanserv")->Get<unsigned>("accessmax", "1024");
+			unsigned count = 0;
+
+			for (unsigned i = 0; i < target_ci->GetAccessCount(); ++i)
+				masks.insert(target_ci->GetAccess(i)->mask);
+
 			for (unsigned i = 0; i < ci->GetAccessCount(); ++i)
 			{
 				const ChanAccess *taccess = ci->GetAccess(i);
 				AccessProvider *provider = taccess->provider;
 
+				if (access_max && target_ci->GetDeepAccessCount() >= access_max)
+					break;
+
+				if (masks.count(taccess->mask))
+					continue;
+				masks.insert(taccess->mask);
+
 				ChanAccess *newaccess = provider->Create();
 				newaccess->ci = target_ci;
 				newaccess->mask = taccess->mask;
@@ -113,9 +134,11 @@ public:
 				newaccess->AccessUnserialize(taccess->AccessSerialize());
 
 				target_ci->AddAccess(newaccess);
+
+				++count;
 			}
 
-			source.Reply(_("All access entries from \002%s\002 have been cloned to \002%s\002."), channel.c_str(), target.c_str());
+			source.Reply(_("%d access entries from \002%s\002 have been cloned to \002%s\002."), count, channel.c_str(), target.c_str());
 		}
 		else if (what.equals_ci("AKICK"))
 		{
@@ -136,21 +159,22 @@ public:
 			BadWords *target_badwords = target_ci->Require<BadWords>("badwords"),
 				*badwords = ci->Require<BadWords>("badwords");
 
-			if (target_badwords && badwords)
+			if (!target_badwords || !badwords)
 			{
-				target_badwords->ClearBadWords();
-
-				for (unsigned i = 0; i < badwords->GetBadWordCount(); ++i)
-				{
-					const BadWord *bw = badwords->GetBadWord(i);
-					target_badwords->AddBadWord(bw->word, bw->type);
-				}
+				source.Reply(ACCESS_DENIED); // BotServ doesn't exist/badwords isn't loaded
+				return;
 			}
 
-			if (badwords)
-				badwords->Check();
-			if (target_badwords)
-				target_badwords->Check();
+			target_badwords->ClearBadWords();
+
+			for (unsigned i = 0; i < badwords->GetBadWordCount(); ++i)
+			{
+				const BadWord *bw = badwords->GetBadWord(i);
+				target_badwords->AddBadWord(bw->word, bw->type);
+			}
+
+			badwords->Check();
+			target_badwords->Check();
 
 			source.Reply(_("All badword entries from \002%s\002 have been cloned to \002%s\002."), channel.c_str(), target.c_str());
 		}

modules/commands/cs_drop.cpp

@@ -1,6 +1,6 @@
 /* ChanServ core functions
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

modules/commands/cs_enforce.cpp

@@ -1,6 +1,6 @@
 /* ChanServ core functions
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Original Coder: GeniusDex <geniusdex@anope.org>

modules/commands/cs_entrymsg.cpp

@@ -1,6 +1,6 @@
 /* ChanServ core functions
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

modules/commands/cs_flags.cpp

@@ -1,6 +1,6 @@
 /* ChanServ core functions
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
@@ -175,21 +175,26 @@ class CommandCSFlags : public Command
 		}
 
 		Privilege *p = NULL;
-		int add = 1;
+		bool add = true;
 		for (size_t i = 0; i < flags.length(); ++i)
 		{
 			char f = flags[i];
 			switch (f)
 			{
 				case '+':
-					add = 1;
+					add = true;
 					break;
 				case '-':
-					add = 0;
+					add = false;
 					break;
 				case '*':
 					for (std::map<Anope::string, char>::iterator it = defaultFlags.begin(), it_end = defaultFlags.end(); it != it_end; ++it)
 					{
+						bool has = current_flags.count(it->second);
+						// If we are adding a flag they already have or removing one they don't have, don't bother
+						if (add == has)
+							continue;
+
 						if (!u_access.HasPriv(it->first) && !u_access.founder)
 						{
 							if (source.HasPriv("chanserv/access/modify"))
@@ -197,9 +202,10 @@ class CommandCSFlags : public Command
 							else
 								continue;
 						}
-						if (add == 1)
+
+						if (add)
 							current_flags.insert(it->second);
-						else if (add == 0)
+						else
 							current_flags.erase(it->second);
 					}
 					break;
@@ -225,9 +231,9 @@ class CommandCSFlags : public Command
 								break;
 							}
 						}
-						if (add == 1)
+						if (add)
 							current_flags.insert(f);
-						else if (add == 0)
+						else
 							current_flags.erase(f);
 						break;
 					}

modules/commands/cs_getkey.cpp

@@ -1,6 +1,6 @@
 /* ChanServ core functions
  *
- * (C) 2003-2013 Anope Team
+ * (C) 2003-2014 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.