Anope 2.0.6 Release

cs_set uses this to set -P on permanent channels if they are persistent.

Also move similar event in nickcore/nickalias destruction

.mailmap

@@ -28,7 +28,9 @@ Naram Qashat <cyberbotx@anope.org> <cyberbotx@5417fbe8-f217-4b02-8779-1006273d78
 Naram Qashat <cyberbotx@anope.org> <cyberbotx@cyberbotx.com>
 Naram Qashat <cyberbotx@anope.org> <Naram Qashat cyberbotx@cyberbotx.com@5417fbe8-f217-4b02-8779-1006273d7864>
 Pieter Bootsma <geniusdex@anope.org> <geniusdex geniusdex@31f1291d-b8d6-0310-a050-a5561fc1590b@5417fbe8-f217-4b02-8779-1006273d7864>
+Robby <robby@anope.org>
 Robby <robby@chat.be>
+Robby <robby@chatbelgie.be>
 Robin Burchell <w00t@inspircd.org> <rburchell@5417fbe8-f217-4b02-8779-1006273d7864>
 Robin Burchell <w00t@inspircd.org> <Robin Burchell w00t@inspircd.org@5417fbe8-f217-4b02-8779-1006273d7864>
 Sebastian V. <hal9000@denorastats.org>

.travis.yml

@@ -0,0 +1,16 @@
+language: cpp
+
+compiler:
+  - gcc
+
+before_script:
+  - mkdir build
+  - cd build
+  - cmake -DINSTDIR:STRING=~/services -DDEFUMASK:STRING=077 -DCMAKE_BUILD_TYPE:STRING=DEBUG -DUSE_RUN_CC_PL:BOOLEAN=ON ..
+
+script:
+  - make
+
+notifications:
+  irc:
+    - "irc.anope.org#anope-devel"

CMakeLists.txt

@@ -2,13 +2,14 @@
 cmake_minimum_required(VERSION 2.4 FATAL_ERROR)
 if(COMMAND cmake_policy)
   cmake_policy(SET CMP0003 NEW)
+  if(POLICY CMP0026)
+    cmake_policy(SET CMP0026 OLD)
+  endif(POLICY CMP0026)
+  if(POLICY CMP0007)
+    cmake_policy(SET CMP0007 OLD)
+  endif(POLICY CMP0007)
 endif(COMMAND cmake_policy)
 
-# If the Source dir and the Binary dir are the same, we are building in-source, which we will disallow due to Autotools being there (but only on non-Windows)
-if(${CMAKE_CURRENT_SOURCE_DIR} STREQUAL ${CMAKE_CURRENT_BINARY_DIR} AND NOT WIN32)
-  message(FATAL_ERROR "You can not use CMake to build Anope from the root of it's source tree! Remove the CMakeCache.txt file from this directory, then create a separate directory (either below this directory or elsewhere), and then re-run CMake from there.")
-endif(${CMAKE_CURRENT_SOURCE_DIR} STREQUAL ${CMAKE_CURRENT_BINARY_DIR} AND NOT WIN32)
-
 # Set the project as C++ primarily, but have C enabled for the checks required later
 project(Anope CXX)
 enable_language(C)
@@ -44,20 +45,20 @@ if(MINOR_VERSION GREATER 5)
   set(CMAKE242_OR_BETTER TRUE)
 else(MINOR_VERSION GREATER 5)
   set(CMAKE26_OR_BETTER FALSE)
-  # Also detect if we are using CMake 2.4.8 or better, the FIND sub-command of list() is non-existant in earlier versions
+  # Also detect if we are using CMake 2.4.8 or better, the FIND sub-command of list() is nonexistent in earlier versions
   if(PATCH_VERSION GREATER 7)
     set(CMAKE248_OR_BETTER TRUE)
     set(CMAKE244_OR_BETTER TRUE)
     set(CMAKE242_OR_BETTER TRUE)
   else(PATCH_VERSION GREATER 7)
     set(CMAKE248_OR_BETTER FALSE)
-    # Also detect if we are using CMake 2.4.4 or better, the CheckCXXCompilerFlag module and SORT sub-command of list() are non-existant in earlier versions
+    # Also detect if we are using CMake 2.4.4 or better, the CheckCXXCompilerFlag module and SORT sub-command of list() are nonexistent in earlier versions
     if(PATCH_VERSION GREATER 3)
       set(CMAKE244_OR_BETTER TRUE)
       set(CMAKE242_OR_BETTER TRUE)
     else(PATCH_VERSION GREATER 3)
       set(CMAKE244_OR_BETTER FALSE)
-      # ALSO detect if we are using CMake 2.4.2 or better, the APPEND sub-command of list() is non-existant in earlier versions
+      # ALSO detect if we are using CMake 2.4.2 or better, the APPEND sub-command of list() is nonexistent in earlier versions
       if(PATCH_VERSION GREATER 1)
         set(CMAKE242_OR_BETTER TRUE)
       else(PATCH_VERSION GREATER 1)
@@ -79,8 +80,20 @@ set(ENV{LC_ALL} C)
 set(DEFAULT_LIBRARY_DIRS)
 set(DEFAULT_INCLUDE_DIRS)
 
+# Check that we aren't running on an ancient broken GCC
+if(CMAKE_COMPILER_IS_GNUCXX)
+  execute_process(COMMAND ${CMAKE_CXX_COMPILER} -dumpversion OUTPUT_VARIABLE GCC_FULL_VERSION OUTPUT_STRIP_TRAILING_WHITESPACE)
+  string(REGEX REPLACE "^(\\d+\\.\\d+)" "\\1" GCC_VERSION ${GCC_FULL_VERSION})
+  if(GCC_VERSION LESS 4.2)
+    message(FATAL_ERROR "Your compiler is too old to build Anope. Upgrade to GCC 4.2 or newer!")
+  endif(GCC_VERSION LESS 4.2)
+  if(GCC_VERSION GREATER 6.0 OR GCC_VERSION EQUAL 6.0)
+    set(CXXFLAGS "${CXXFLAGS} -fno-delete-null-pointer-checks")
+  endif(GCC_VERSION GREATER 6.0 OR GCC_VERSION EQUAL 6.0)
+endif(CMAKE_COMPILER_IS_GNUCXX)
+
 # If we are using a GNU compiler (have to use CXX because it seems to fail on C), we will be able to determine it's default paths for libraries and includes
-if(CMAKE_COMPILER_IS_GNUCXX OR "${CMAKE_CXX_COMPILER_ID}" STREQUAL "Clang")
+if(CMAKE_COMPILER_IS_GNUCXX OR "${CMAKE_CXX_COMPILER_ID}" MATCHES "Clang$")
   # First look for the compiler's default library directories
   execute_process(COMMAND ${CMAKE_C_COMPILER} -print-search-dirs OUTPUT_VARIABLE LINES OUTPUT_STRIP_TRAILING_WHITESPACE)
   # Find only the part after "libraries: "
@@ -146,7 +159,7 @@ if(CMAKE_COMPILER_IS_GNUCXX OR "${CMAKE_CXX_COMPILER_ID}" STREQUAL "Clang")
   if(DEFAULT_INCLUDE_DIRS)
     remove_list_duplicates(DEFAULT_INCLUDE_DIRS)
   endif(DEFAULT_INCLUDE_DIRS)
-endif(CMAKE_COMPILER_IS_GNUCXX OR "${CMAKE_CXX_COMPILER_ID}" STREQUAL "Clang")
+endif(CMAKE_COMPILER_IS_GNUCXX OR "${CMAKE_CXX_COMPILER_ID}" MATCHES "Clang$")
 
 # If we are using Visual Studio, locate the path of the Windows Server 2008 SDK or Windows Server 2003 Platform SDK, depending on which is installed
 if(MSVC)
@@ -222,8 +235,6 @@ endif(EXTRA_LIBS)
 # Find gettext
 find_package(Gettext)
 
-# Add an optional variable for using run-cc.pl for building, Perl will be checked later regardless of this setting
-option(USE_RUN_CC_PL "Use run-cc.pl for building" OFF)
 option(USE_PCH "Use precompiled headers" OFF)
 
 # Use the following directories as includes
@@ -231,6 +242,11 @@ option(USE_PCH "Use precompiled headers" OFF)
 # source include directory so the precompiled headers work correctly.
 include_directories(${Anope_BINARY_DIR}/include ${Anope_SOURCE_DIR}/include ${Anope_BINARY_DIR}/language ${Anope_SOURCE_DIR}/modules/pseudoclients)
 
+# Pass on REPRODUCIBLE_BUILD
+if(REPRODUCIBLE_BUILD)
+  add_definitions(-DREPRODUCIBLE_BUILD)
+endif(REPRODUCIBLE_BUILD)
+
 # If using Windows, always add the _WIN32 define
 if(WIN32)
   add_definitions(-D_WIN32)
@@ -276,13 +292,15 @@ if(MINGW)
   set(CMAKE_MODULE_LINKER_FLAGS "${CMAKE_MODULE_LINKER_FLAGS} ${CMAKE_SHARED_LIBRARY_CREATE_C_FLAGS}")
 endif(MINGW)
 
-# Under Windows, we set the executable name for Anope to be anope
-if(WIN32)
-  set(PROGRAM_NAME anope)
-# Under *nix, we set the executable name for Anope to be services
-else(WIN32)
-  set(PROGRAM_NAME services)
-endif(WIN32)
+if(NOT PROGRAM_NAME)
+  # Under Windows, we set the executable name for Anope to be anope
+  if(WIN32)
+    set(PROGRAM_NAME anope)
+  # Under *nix, we set the executable name for Anope to be services
+  else(WIN32)
+    set(PROGRAM_NAME services)
+  endif(WIN32)
+endif(NOT PROGRAM_NAME)
 
 # If we are not using Visual Studio, we'll run the following checks
 if(NOT MSVC)
@@ -337,12 +355,12 @@ if(CMAKE_BUILD_TYPE STREQUAL "DEBUG" OR CMAKE_BUILD_TYPE STREQUAL "RELWITHDEBINF
   set(DEBUG_BUILD TRUE)
 endif(CMAKE_BUILD_TYPE STREQUAL "DEBUG" OR CMAKE_BUILD_TYPE STREQUAL "RELWITHDEBINFO")
 
-# Check for the existance of the following include files
+# Check for the existence of the following include files
 check_include_file(cstdint HAVE_CSTDINT)
 check_include_file(stdint.h HAVE_STDINT_H)
 check_include_file(strings.h HAVE_STRINGS_H)
 
-# Check for the existance of the following functions
+# Check for the existence of the following functions
 check_function_exists(strcasecmp HAVE_STRCASECMP)
 check_function_exists(stricmp HAVE_STRICMP)
 check_function_exists(umask HAVE_UMASK)
@@ -364,19 +382,11 @@ find_program(GREP grep)
 find_program(SH sh)
 find_program(CHGRP chgrp)
 find_program(CHMOD chmod)
-find_program(PERL perl)
-
-# If perl is included on the system and the user wants to use run-cc.pl, change the commands for compiling and linking
-if(PERL AND USE_RUN_CC_PL)
-  set(CMAKE_CXX_COMPILE_OBJECT "${PERL} ${Anope_SOURCE_DIR}/run-cc.pl -q ${CMAKE_CXX_COMPILE_OBJECT}")
-  set(CMAKE_CXX_LINK_EXECUTABLE "${PERL} ${Anope_SOURCE_DIR}/run-cc.pl -q ${CMAKE_CXX_LINK_EXECUTABLE}")
-  set(CMAKE_CXX_CREATE_SHARED_MODULE "${PERL} ${Anope_SOURCE_DIR}/run-cc.pl -q ${CMAKE_CXX_CREATE_SHARED_MODULE}")
-endif(PERL AND USE_RUN_CC_PL)
 
 # If a INSTDIR was passed in to CMake, use it as the install prefix, otherwise set the default install prefix to the services directory under the user's home directory
 if(INSTDIR)
   set(CMAKE_INSTALL_PREFIX "${INSTDIR}")
-else(INSTDIR)
+elseif(NOT CMAKE_INSTALL_PREFIX)
   set(CMAKE_INSTALL_PREFIX "$ENV{HOME}/services")
 endif(INSTDIR)
 
@@ -408,16 +418,14 @@ endif(NOT LOGS_DIR)
 read_from_file(${Anope_SOURCE_DIR}/src/version.sh "^VERSION_" VERSIONS)
 # Iterate through the strings found
 foreach(VERSION_STR ${VERSIONS})
-  # Get the length of the string
-  string(LENGTH ${VERSION_STR} VERSION_LEN)
-  # Subtract 16 from the string's length (8 for VERSION_, 5 more for the type, 2 for the space and leading quote, 1 for the trailing quote)
-  math(EXPR VERSION_NUM_LEN "${VERSION_LEN} - 16")
-  # Extract the type from the string
-  string(SUBSTRING ${VERSION_STR} 8 5 VERSION_TYPE)
-  # Extract the actual value from the string
-  string(SUBSTRING ${VERSION_STR} 15 ${VERSION_NUM_LEN} VERSION)
-  # Set the version type to the value extract from above
-  set(VERSION_${VERSION_TYPE} ${VERSION})
+  string(REGEX REPLACE "^VERSION_([A-Z]+)=\"?([^\"]*)\"?$" "\\1;\\2" VERSION_OUT ${VERSION_STR})
+  # Depends on CMP0007 OLD
+  list(LENGTH VERSION_OUT VERSION_LEN)
+  list(GET VERSION_OUT 0 VERSION_TYPE)
+  if(${VERSION_LEN} GREATER 1)
+    list(GET VERSION_OUT 1 VERSION_DATA)
+    set(VERSION_${VERSION_TYPE} ${VERSION_DATA})
+  endif(${VERSION_LEN} GREATER 1)
 endforeach(VERSION_STR ${VERSIONS})
 
 # Default build version to 0
@@ -481,16 +489,16 @@ get_target_property(SERVICES_BINARY ${PROGRAM_NAME} LOCATION)
 get_filename_component(SERVICES_BINARY ${SERVICES_BINARY} NAME)
 
 # At install time, create the following additional directories
-install(CODE "file(MAKE_DIRECTORY \"\${CMAKE_INSTALL_PREFIX}/${DB_DIR}/backups\")")
-install(CODE "file(MAKE_DIRECTORY \"\${CMAKE_INSTALL_PREFIX}/${LOGS_DIR}\")")
+install(CODE "file(MAKE_DIRECTORY \"\$ENV{DESTDIR}\${CMAKE_INSTALL_PREFIX}/${DB_DIR}/backups\")")
+install(CODE "file(MAKE_DIRECTORY \"\$ENV{DESTDIR}\${CMAKE_INSTALL_PREFIX}/${LOGS_DIR}\")")
 if(WIN32)
-  install(CODE "file(MAKE_DIRECTORY \"\${CMAKE_INSTALL_PREFIX}/${DB_DIR}/runtime\")")
+  install(CODE "file(MAKE_DIRECTORY \"\$ENV{DESTDIR}\${CMAKE_INSTALL_PREFIX}/${DB_DIR}/runtime\")")
 endif(WIN32)
 # On non-Windows platforms, if RUNGROUP is set, change the permissions of the below directories, as well as the group of the data directory
 if(NOT WIN32 AND RUNGROUP)
-  install(CODE "execute_process(COMMAND ${CHMOD} 2775 \"\${CMAKE_INSTALL_PREFIX}/\${DB_DIR}/backups\")")
-  install(CODE "execute_process(COMMAND ${CHMOD} 2775 \"\${CMAKE_INSTALL_PREFIX}/\${LOGS_DIR}\")")
-  install(CODE "execute_process(COMMAND ${CHGRP} -R ${RUNGROUP} \"\${CMAKE_INSTALL_PREFIX}\")")
+  install(CODE "execute_process(COMMAND ${CHMOD} 2775 \"\$ENV{DESTDIR}\${CMAKE_INSTALL_PREFIX}/\${DB_DIR}/backups\")")
+  install(CODE "execute_process(COMMAND ${CHMOD} 2775 \"\$ENV{DESTDIR}\${CMAKE_INSTALL_PREFIX}/\${LOGS_DIR}\")")
+  install(CODE "execute_process(COMMAND ${CHGRP} -R ${RUNGROUP} \"\$ENV{DESTDIR}\${CMAKE_INSTALL_PREFIX}\")")
 endif(NOT WIN32 AND RUNGROUP)
 # On Windows platforms, install extra files
 if(WIN32)
@@ -503,7 +511,7 @@ if(WIN32)
   install(FILES ${EXTRA_DLLS} DESTINATION ${BIN_DIR})
 endif(WIN32)
 
-install(CODE "file(REMOVE_RECURSE \"${CMAKE_INSTALL_PREFIX}/${LIB_DIR}/modules\")")
+install(CODE "file(REMOVE_RECURSE \"$ENV{DESTDIR}${CMAKE_INSTALL_PREFIX}/${LIB_DIR}/modules\")")
 
 # Only process the CPack section if we have CPack
 if(EXISTS "${CMAKE_ROOT}/Modules/CPack.cmake")

Config

@@ -2,7 +2,7 @@
 #
 # Configuration script for Services.
 #
-# Anope (c) 2003-2014 Anope Team
+# Anope (c) 2003-2017 Anope Team
 # Contact us at team@anope.org
 #
 # This program is free but copyrighted software; see the file COPYING for
@@ -62,12 +62,6 @@ Run_Build_System () {
 		BUILD_TYPE="-DCMAKE_BUILD_TYPE:STRING=RELEASE"
 	fi
 
-	if [ "$USE_RUN_CC_PL" = "yes" ] ; then
-		RUN_CC_PL="-DUSE_RUN_CC_PL:BOOLEAN=ON"
-	else
-		RUN_CC_PL="-DUSE_RUN_CC_PL:BOOLEAN=OFF"
-	fi
-
 	if [ "$USE_PCH" = "yes" ] ; then
 		PCH="-DUSE_PCH:BOOLEAN=ON"
 	else
@@ -97,9 +91,13 @@ Run_Build_System () {
 		REAL_SOURCE_DIR="$SOURCE_DIR"
 	fi
 
-	echo "cmake $GEN_TYPE $WITH_INST $WITH_RUN $WITH_PERM $BUILD_TYPE $RUN_CC_PL $PCH $EXTRA_INCLUDE $EXTRA_LIBS $EXTRA_CONFIG_ARGS $REAL_SOURCE_DIR"
+	echo "cmake $GEN_TYPE $WITH_INST $WITH_RUN $WITH_PERM $BUILD_TYPE $PCH $EXTRA_INCLUDE $EXTRA_LIBS $EXTRA_CONFIG_ARGS $REAL_SOURCE_DIR"
 
-	cmake $GEN_TYPE $WITH_INST $WITH_RUN $WITH_PERM $BUILD_TYPE $RUN_CC_PL $PCH $EXTRA_INCLUDE $EXTRA_LIBS $EXTRA_CONFIG_ARGS $REAL_SOURCE_DIR
+	cmake $GEN_TYPE $WITH_INST $WITH_RUN $WITH_PERM $BUILD_TYPE $PCH $EXTRA_INCLUDE $EXTRA_LIBS $EXTRA_CONFIG_ARGS $REAL_SOURCE_DIR
+	if [ $? -ne 0 ]; then
+		echo "You should fix these issues and then run ./Config -quick to rerun CMake."
+		exit 1
+	fi
 
 	echo ""
 	if [ "$SOURCE_DIR" = "." ] ; then
@@ -131,7 +129,6 @@ INSTDIR=$HOME/services
 RUNGROUP=
 UMASK=
 DEBUG="no"
-USE_RUN_CC_PL="no"
 USE_PCH="no"
 EXTRA_INCLUDE_DIRS=
 EXTRA_LIB_DIRS=
@@ -173,45 +170,12 @@ done
 # Check for CMake and (optionally) install it
 ###########################################################################
 
-which cmake > /dev/null
+cmake --version 2>&1 > /dev/null
 if [ $? -ne 0 ] ; then
 	clear
-	if exists "cmake-bin" ; then :
-	else
-		echo "Anope requires CMake 2.4 or newer, which can be downloaded at http://cmake.org"
-		echo "If you have installed CMake already, ensure it is in your PATH environment variable."
-
-		if [ `uname` = "Linux" ] ; then
-
-			echo ""
-			echo "Config can attempt to install CMake for you now, which"
-			echo "will take approximately 50 MB of disk space."
-			echo "Would you like to install CMake now?"
-			echo2 "[y] "
-			read YN
-			if [ "$YN" = "n" ] ; then
-				exit 0
-			fi
-
-			echo "Downloading CMake... this may take a minute or two."
-			wget -q http://anope.org/cmake/linux-i386.php -O cmake-bin.tar.gz
-			if [ $? -ne 0 ] ; then
-				rm -f cmake-bin.tar.gz
-				echo "Unable to download CMake"
-				exit 0
-			fi
-			mkdir -p cmake-bin
-			tar zxf cmake-bin.tar.gz -C cmake-bin
-			rm -f cmake-bin.tar.gz
-			echo "Done!"
-		else
-			exit 0
-		fi
-	fi
-
-	CMAKE_BIN=`find cmake-bin -name cmake`
-	CMAKE_BIN="`pwd`/`dirname $CMAKE_BIN`"
-	PATH="$PATH:$CMAKE_BIN"
+	echo "Anope requires CMake 2.4 or newer, which can be downloaded at http://cmake.org or through your system's package manager."
+	echo "If you have installed CMake already, ensure it is in your PATH environment variable."
+	exit 0
 fi
 
 ###########################################################################
@@ -354,30 +318,6 @@ echo ""
 
 ####
 
-TEMP_YN="n"
-if [ "$USE_RUN_CC_PL" = "yes" ] ; then
-	TEMP_YN="y"
-fi
-echo "You can optionally have the build run through run-cc.pl, which will"
-echo "cause warnings and errors (if any) to be colored yellow and red,"
-echo "respectively. This relies on Perl being installed, so if you say yes"
-echo "to this without Perl, the option will be ignored."
-echo "NOTE: If you are using MinGW, it is NOT recommended to say yes to"
-echo "this, it may fail."
-echo "Would you like to utilize run-cc.pl?"
-echo2 "[$TEMP_YN] "
-read YN
-if [ "$YN" ] ; then
-	if [ "$YN" = "y" ] ; then
-		USE_RUN_CC_PL="yes"
-	else
-		USE_RUN_CC_PL="no"
-	fi
-fi
-echo ""
-
-####
-
 TEMP_YN="n"
 if [ "$USE_PCH" = "yes" ] ; then
 	TEMP_YN="y"
@@ -434,7 +374,7 @@ echo ""
 ####
 
 echo "Are there any extra arguments you wish to pass to CMake?"
-echo "If you need no extra arugments to CMake, enter NONE in all caps."
+echo "If you need no extra arguments to CMake, enter NONE in all caps."
 echo2 "[$EXTRA_CONFIG_ARGS] "
 if read INPUT ; then : ; else echo "" ; exit 1 ; fi
 if [ "$INPUT" ] ; then
@@ -459,7 +399,6 @@ INSTDIR="$INSTDIR"
 RUNGROUP="$RUNGROUP"
 UMASK=$UMASK
 DEBUG="$DEBUG"
-USE_RUN_CC_PL="$USE_RUN_CC_PL"
 USE_PCH="$USE_PCH"
 EXTRA_INCLUDE_DIRS="$EXTRA_INCLUDE_DIRS"
 EXTRA_LIB_DIRS="$EXTRA_LIB_DIRS"

README.md

@@ -0,0 +1,46 @@
+## About
+
+Anope is an open source set of IRC Services. It is highly modular, with a vast number of configurable parameters, and is the most used IRC services package. There are also many modules on the [modsite](https://modules.anope.org) to add additional features. It runs on Linux, BSD, and Windows, and supports many modern IRCds, including InspIRCd, UnrealIRCd, and ircd-hybrid. For more details, credits, command line options, and contact information see [docs/README](https://github.com/anope/anope/blob/2.0/docs/README).
+
+* [Website](https://anope.org)
+* [GitHub](https://github.com/anope)
+* IRC \#anope on irc.anope.org
+
+## Installation
+
+### Linux/BSD
+Download the latest release off of the [releases page](https://github.com/anope/anope/releases).
+
+
+```
+$ ./Config
+$ cd build
+$ make
+$ make install
+```
+
+Now change to the directory where you installed Anope to, e.g. `$ cd ~/services/`
+
+### Windows
+Download the latest release off of the [releases page](https://github.com/anope/anope/releases) and run the installer.
+
+
+## Configuration
+
+Copy conf/example.conf to conf/services.conf
+
+```
+$ cp conf/example.conf conf/services.conf
+```
+
+Edit services.conf, configuring the uplink, serverinfo, and protocol module configurations. Example link blocks for popular IRCds are included in the the example.conf documentation. The [Anope wiki](https://wiki.anope.org) is also a good source of information. Our support channel is located at #anope on [irc.anope.org](irc://irc.anope.org/#anope).
+
+Note that the example configuration file includes other example configuration files. If you want to modify the other example configuration files, copy them (e.g. `modules.example.conf` to `modules.conf`) and modify the `include` directive in `services.conf` to include the new file.
+
+## Running
+
+Run `$ ./bin/services` to start Anope. If asked to provide logs for support, use the `--support` flag, e.g.: `$ ./bin/services --support`
+
+## Installing extra modules
+
+Extra modules, which are usually modules which require extra libraries to use, such as m\_mysql, can be enabled with the `./extras` command from the source directory. Then re-run `Config`, `make` and `make install` again. Third party modules can be installed by placing them into the `modules/third` directory.

cmake/Anope.cmake

@@ -432,11 +432,15 @@ macro(calculate_libraries SRC SRC_LDFLAGS EXTRA_DEPENDS)
   # Reset libraries
   set(LIBRARIES)
   # Check to see if there are any lines matching: /* RequiredLibraries: [something] */
-  read_from_file(${SRC} "/\\\\*[ \t]*RequiredLibraries:[ \t]*.*[ \t]*\\\\*/" REQUIRED_LIBRARIES)
+  if(WIN32)
+    read_from_file(${SRC} "/\\\\*[ \t]*RequiredWindowsLibraries:[ \t]*.*[ \t]*\\\\*/" REQUIRED_LIBRARIES)
+  else(WIN32)
+    read_from_file(${SRC} "/\\\\*[ \t]*RequiredLibraries:[ \t]*.*[ \t]*\\\\*/" REQUIRED_LIBRARIES)
+  endif(WIN32)
   # Iterate through those lines
   foreach(REQUIRED_LIBRARY ${REQUIRED_LIBRARIES})
     # Strip off the /* RequiredLibraries: and */ from the line
-    string(REGEX REPLACE "/\\*[ \t]*RequiredLibraries:[ \t]*([^ \t]*)[ \t]*\\*/" "\\1" REQUIRED_LIBRARY ${REQUIRED_LIBRARY})
+    string(REGEX REPLACE "/\\*[ \t]*Required.*Libraries:[ \t]*([^ \t]*)[ \t]*\\*/" "\\1" REQUIRED_LIBRARY ${REQUIRED_LIBRARY})
     # Replace all commas with semicolons
     string(REGEX REPLACE "," ";" REQUIRED_LIBRARY ${REQUIRED_LIBRARY})
     # Iterate through the libraries given
@@ -445,7 +449,8 @@ macro(calculate_libraries SRC SRC_LDFLAGS EXTRA_DEPENDS)
       if(DEFAULT_LIBRARY_DIRS OR WSDK_PATH OR DEFINED $ENV{VCINSTALLDIR})
         find_library(FOUND_${LIBRARY}_LIBRARY NAMES ${LIBRARY} PATHS ${DEFAULT_LIBRARY_DIRS} ${WSDK_PATH}/lib $ENV{VCINSTALLDIR}/lib ${EXTRA_INCLUDE} ${EXTRA_LIBS})
       else(DEFAULT_LIBRARY_DIRS OR WSDK_PATH OR DEFINED $ENV{VCINSTALLDIR})
-        find_library(FOUND_${LIBRARY}_LIBRARY NAMES ${LIBRARY} ${EXTRA_INCLUDE} ${EXTRA_LIBS})
+        find_library(FOUND_${LIBRARY}_LIBRARY NAMES ${LIBRARY} PATHS ${EXTRA_INCLUDE} ${EXTRA_LIBS} NO_DEFAULT_PATH)
+        find_library(FOUND_${LIBRARY}_LIBRARY NAMES ${LIBRARY} PATHS ${EXTRA_INCLUDE} ${EXTRA_LIBS})
       endif(DEFAULT_LIBRARY_DIRS OR WSDK_PATH OR DEFINED $ENV{VCINSTALLDIR})
       # If the library was found, we will add it to the linker flags
       if(FOUND_${LIBRARY}_LIBRARY)

cmake/FindGettext.cmake

@@ -2,33 +2,25 @@
 if(NOT WIN32)
   find_path(GETTEXT_INCLUDE libintl.h /usr/include /usr/local/include ${EXTRA_INCLUDE})
   find_library(GETTEXT_LIBRARY intl PATHS /usr/lib /usr/lib64 ${EXTRA_LIBS})
-  find_library(ICONV_LIBRARY iconv PATHS /usr/lib /usr/lib64 ${EXTRA_LIBS})
   find_program(GETTEXT_MSGFMT msgfmt PATHS /usr/bin/ /usr/local/bin ${EXTRA_INCLUDE})
   if(GETTEXT_INCLUDE AND GETTEXT_MSGFMT)
     set(GETTEXT_FOUND TRUE)
+    if(GETTEXT_LIBRARY)
+      set(GETTEXT_LIBRARIES ${GETTEXT_LIBRARY})
+    endif(GETTEXT_LIBRARY)
   endif(GETTEXT_INCLUDE AND GETTEXT_MSGFMT)
 else(NOT WIN32)
   find_path(GETTEXT_INCLUDE libintl.h ${DEFAULT_INCLUDE_DIRS} ${WSDK_PATH}/include $ENV{VCINSTALLDIR}/include gettext/include ${EXTRA_INCLUDE})
   find_library(GETTEXT_LIBRARY libintl PATHS ${DEFAULT_LIBRARY_DIRS} ${WSDK_PATH}/lib $ENV{VCINSTALLDIR}/lib gettext/lib ${EXTRA_LIBS})
-  find_library(ICONV_LIBRARY libiconv PATHS ${DEFAULT_LIBRARY_DIRS} ${WSDK_PATH}/lib $ENV{VCINSTALLDIR}/lib gettext/lib ${EXTRA_LIBS})
-  find_library(MINGWEX_LIBRARY libmingwex PATHS ${DEFAULT_LIBRARY_DIRS} ${WSDK_PATH}/lib $ENV{VCINSTALLDIR}/lib gettext/lib ${EXTRA_LIBS})
-  find_library(GCC_LIBRARY libgcc PATHS ${DEFAULT_LIBRARY_DIRS} ${WSDK_PATH}/lib $ENV{VCINSTALLDIR}/lib gettext/lib ${EXTRA_LIBS})
   find_program(GETTEXT_MSGFMT msgfmt PATHS ${DEFAULT_INCLUDE_DIRS} ${WSDK_PATH}/bin $ENV{VCINSTALLDIR}/bin gettext/bin ${EXTRA_INCLUDE})
-  if(GETTEXT_INCLUDE AND GETTEXT_MSGFMT AND ICONV_LIBRARY AND MINGWEX_LIBRARY AND GCC_LIBRARY)
+  if(GETTEXT_INCLUDE AND GETTEXT_LIBRARY AND GETTEXT_MSGFMT)
     set(GETTEXT_FOUND TRUE)
-  endif(GETTEXT_INCLUDE AND GETTEXT_MSGFMT AND ICONV_LIBRARY AND MINGWEX_LIBRARY AND GCC_LIBRARY)
+    set(GETTEXT_LIBRARIES ${GETTEXT_LIBRARY})
+  endif(GETTEXT_INCLUDE AND GETTEXT_LIBRARY AND GETTEXT_MSGFMT)
 endif(NOT WIN32)
 
 # If we found everything we need set variables correctly for lang/CMakeLists.txt to use
 if(GETTEXT_FOUND)
   include_directories("${GETTEXT_INCLUDE}")
   set(GETTEXT_MSGFMT_EXECUTABLE ${GETTEXT_MSGFMT})
-
-  if(WIN32)
-    set(GETTEXT_LIBRARIES libiconv libintl libmingwex libgcc)
-  else(WIN32)
-    if(GETTEXT_LIBRARY)
-      set(GETTEXT_LIBRARIES ${GETTEXT_LIBRARY} ${ICONV_LIBRARY})
-    endif(GETTEXT_LIBRARY)
-  endif(WIN32)
 endif(GETTEXT_FOUND)

data/botserv.example.conf

@@ -10,7 +10,7 @@
  * client, the client becomes no different from a normal service bot, so you will have to use botserv/bot
  * to manually delete the client.
  *
- * You may then waant to map some of the below commands to other services, like placing botserv/bot on
+ * You may then want to map some of the below commands to other services, like placing botserv/bot on
  * OperServ so you can delete the below client, and mapping assign and unassign to ChanServ so users are
  * able to control whether or not ChanServ is in the channel. You may also want to map botserv/set/nobot
  * to OperServ so you can restrict who can assign the other core service clients.
@@ -202,7 +202,7 @@ command { service = "BotServ"; name = "BADWORDS"; command = "botserv/badwords";
  * Used for administrating BotServ bots.
  */
 module { name = "bs_bot" }
-command { service = "BotServ"; name = "BOT"; command = "botserv/bot"; }
+command { service = "BotServ"; name = "BOT"; command = "botserv/bot"; permission = "botserv/bot"; }
 
 /*
  * bs_botlist
@@ -386,6 +386,7 @@ fantasy { name = "LEVELS"; command = "chanserv/levels"; }
 fantasy { name = "LIST"; command = "chanserv/list"; prepend_channel = false; }
 fantasy { name = "LOG"; command = "chanserv/log"; }
 fantasy { name = "MODE"; command = "chanserv/mode"; }
+fantasy { name = "MUTE"; command = "chanserv/ban"; kick = no; mode = "QUIET"; }
 fantasy { name = "OP"; command = "chanserv/modes"; }
 fantasy { name = "OWNER"; command = "chanserv/modes"; }
 fantasy { name = "PROTECT"; command = "chanserv/modes"; }

data/chanserv.example.conf

@@ -151,6 +151,13 @@ module
 	 */
 	reasonmax = 200
 
+	/*
+	 * The message formatting to use for signed kick messages.
+	 * %n is the nick of the kicker
+	 * %m is the message specified
+	 */
+	signkickformat = "%m (%n)"
+
 	/*
 	 * If set, prevents channel access entries from containing hostmasks.
 	 */
@@ -658,7 +665,7 @@ privilege
 	rank = 300
 	level = 10
 	flag = "a"
-	xop = "AOP"
+	xop = "SOP"
 }
 
 /*
@@ -799,25 +806,25 @@ privilege
 command_group
 {
 	name = "chanserv/access"
-	description = "Used to manage the list of privileged users"
+	description = _("Used to manage the list of privileged users")
 }
 
 command_group
 {
 	name = "chanserv/status"
-	description = "Used to modify the channel status of you or other users"
+	description = _("Used to modify the channel status of you or other users")
 }
 
 command_group
 {
 	name = "chanserv/management"
-	description = "Used to manage channels"
+	description = _("Used to manage channels")
 }
 
 command_group
 {
 	name = "chanserv/admin"
-	description = "Services Operator commands"
+	description = _("Services Operator commands")
 }
 
 /* Give it a help command. */
@@ -868,6 +875,12 @@ command { service = "ChanServ"; name = "AKICK"; command = "chanserv/akick"; grou
  *
  * Provides the command chanserv/ban.
  *
+ * The configuration option 'kick' may be set in a command block for this command to control
+ * whether or not users will be kicked from the channel once banned. The default is 'yes'.
+ *
+ * The configuration option 'mode' may be set to control which mode is set, such as BAN or QUIET.
+ * The default is BAN.
+ *
  * Used for banning users from channels.
  */
 module { name = "cs_ban" }
@@ -929,7 +942,7 @@ command { service = "ChanServ"; name = "ENTRYMSG"; command = "chanserv/entrymsg"
  *
  * The "LIST" subcommand of chanserv/flags will show every access entry on the channel, including access
  * entries not added by cs_flags. The "Flags" of these entries will be the flags representation of the
- * privilege set granted by the access entry. 
+ * privilege set granted by the access entry.
  */
 module { name = "cs_flags" }
 command { service = "ChanServ"; name = "FLAGS"; command = "chanserv/flags"; group = "chanserv/access"; }
@@ -1055,6 +1068,13 @@ module
 	 * If not set, the default is +nt.
 	 */
 	mlock = "+nt"
+
+	/*
+	 * The maximum number of entries that may be on a mode lock list.
+	 *
+	 * This directive is optional.
+	 */
+	max = 32
 }
 command { service = "ChanServ"; name = "MODE"; command = "chanserv/mode"; group = "chanserv/management"; }
 
@@ -1101,9 +1121,6 @@ module
 
 	/* Sets the time to keep seen entries in the seen database. */
 	purgetime = "30d"
-
-	/* Sets the delay between checks for expired seen entries. */
-	expiretimeout = "1d"
 }
 command { service = "OperServ"; name = "SEEN"; command = "operserv/seen"; permission = "operserv/seen"; }
 
@@ -1155,7 +1172,7 @@ command { service = "ChanServ"; name = "SET"; command = "chanserv/set"; group =
 command { service = "ChanServ"; name = "SET AUTOOP"; command = "chanserv/set/autoop"; }
 command { service = "ChanServ"; name = "SET BANTYPE"; command = "chanserv/set/bantype"; }
 command { service = "ChanServ"; name = "SET DESCRIPTION"; command = "chanserv/set/description"; }
-command { service = "ChanServ"; name = "SET DESC"; command = "chanserv/set/description"; }
+command { service = "ChanServ"; name = "SET DESC"; command = "chanserv/set/description"; hide = yes; }
 command { service = "ChanServ"; name = "SET FOUNDER"; command = "chanserv/set/founder"; }
 command { service = "ChanServ"; name = "SET KEEPMODES"; command = "chanserv/set/keepmodes"; }
 command { service = "ChanServ"; name = "SET PEACE"; command = "chanserv/set/peace"; }
@@ -1209,6 +1226,13 @@ module
 	 * If not set, the default is never.
 	 */
 	expire = 90d
+
+	/*
+	 * Settings to show to non-opers in ChanServ's INFO output.
+	 * Comment to completely disable showing any information about
+	 * suspended channels to non-opers.
+	 */
+	show = "suspended, by, reason, on, expires"
 }
 command { service = "ChanServ"; name = "SUSPEND"; command = "chanserv/suspend"; permission = "chanserv/suspend"; group = "chanserv/admin"; }
 command { service = "ChanServ"; name = "UNSUSPEND"; command = "chanserv/unsuspend"; permission = "chanserv/suspend"; group = "chanserv/admin"; }

data/example.chk

@@ -37,7 +37,8 @@ cd $ANOPATH
 if [ -f "$ANODATA/$ANOPIDF" ]
 then
 	ANOPID=`cat "$ANODATA/$ANOPIDF"`
-	if [ `ps auwx | grep $ANOPROG | grep $ANOPID | grep -v -c grep` = 1 ]
+	kill -0 $ANOPID 2>/dev/null
+	if [ $? -eq 0 ]
 	then
 		exit
 	fi

data/example.conf

@@ -255,7 +255,8 @@ serverinfo
  *  - ngircd
  *  - plexus
  *  - ratbox
- *  - unreal
+ *  - unreal (for 3.2.x)
+ *  - unreal4
  */
 module
 {
@@ -319,6 +320,16 @@ networkinfo
 	 */
 	modelistsize = 100
 
+	/*
+	 * Characters allowed in nicknames. This always includes the characters described
+	 * in RFC1459, and so does not need to be set for normal behavior. Changing this to
+	 * include characters your IRCd doesn't support will cause your IRCd and/or Services
+	 * to break. Multibyte characters are not supported, nor are escape sequences.
+	 *
+	 * It is recommended you DON'T change this.
+	 */
+	#nick_chars = ""
+
 	/*
 	 * The characters allowed in hostnames. This is used for validating hostnames given
 	 * to services, such as BotServ bot hostnames and user vhosts. Changing this is not
@@ -462,7 +473,7 @@ options
 
 	/*
 	 * If set, this will allow users to let Services send PRIVMSGs to them
-	 * instead of NOTICEs. Also see the defmsg option of nickserv:defaults,
+	 * instead of NOTICEs. Also see the "msg" option of nickserv:defaults,
 	 * which also toggles the default communication (PRIVMSG or NOTICE) to
 	 * use for unregistered users.
 	 *
@@ -521,7 +532,7 @@ options
 	 *
 	 * Note for this to work the regex module providing the regex engine must be loaded.
 	 */
-	regexengine = "regex/pcre"
+	#regexengine = "regex/pcre"
 
 	/*
 	 * A list of languages to load on startup that will be available in /nickserv set language.
@@ -703,7 +714,7 @@ log
 	 *    create, destroy, join, part, kick, leave, mode
 	 *
 	 * Valid user options are:
-	 *    connect, disconnect, quit, nick, ident, host, mode, maxusers, oper
+	 *    connect, disconnect, quit, nick, ident, host, mode, maxusers, oper, away
 	 *
 	 * Rawio and debug are simple yes/no answers, there are no types for them.
 	 *
@@ -726,7 +737,7 @@ log
 log
 {
 	target = "globops"
-	admin = "global/* operserv/mode operserv/kick operserv/akill operserv/s*line operserv/noop operserv/jupe operserv/oline operserv/set operserv/svsnick operserv/svsjoin operserv/svspart nickserv/getpass */drop"
+	admin = "global/* operserv/chankill operserv/mode operserv/kick operserv/akill operserv/s*line operserv/noop operserv/jupe operserv/oline operserv/set operserv/svsnick operserv/svsjoin operserv/svspart nickserv/getpass */drop"
 	servers = "squit"
 	users = "oper"
 	other = "expire/* bados akill/*"
@@ -747,7 +758,9 @@ log
  *
  * Available privileges:
  *  botserv/administration        - Can view and assign private BotServ bots
+ *  botserv/fantasy               - Can use fantasy commands without the FANTASIA privilege
  *  chanserv/administration       - Can modify the settings of any channel (including changing of the owner!)
+ *  chanserv/access/list          - Can view channel access and akick lists, but not modify them
  *  chanserv/access/modify        - Can modify channel access and akick lists, and use /chanserv enforce
  *  chanserv/auspex               - Can see any information with /chanserv info
  *  chanserv/no-register-limit    - May register an unlimited number of channels and nicknames
@@ -761,21 +774,17 @@ log
  *  nickserv/confirm              - Can confirm other users nicknames
  *  nickserv/drop                 - Can drop other users nicks
  *  operserv/config               - Can modify services's configuration
+ *  operserv/oper/modify          - Can add and remove operators with at most the same privileges
  *  protected                     - Can not be kicked from channels by Services
  *
  * Available commands:
  *   botserv/bot/del          botserv/bot/add               botserv/bot/change        botserv/set/private
  *   botserv/set/nobot
  *
- *   chanserv/access/list     chanserv/drop                 chanserv/getkey           chanserv/invite
+ *   chanserv/drop            chanserv/getkey               chanserv/invite
  *   chanserv/list            chanserv/suspend              chanserv/topic
  *
- *   chanserv/saset/bantype   chanserv/saset/description    chanserv/saset/email       chanserv/saset/keepmodes
- *   chanserv/saset/founder   chanserv/saset/keeptopic      chanserv/saset/restricted
- *   chanserv/saset/peace     chanserv/saset/persist        chanserv/saset/private
- *   chanserv/saset/secure    chanserv/saset/securefounder  chanserv/saset/secureops
- *   chanserv/saset/signkick  chanserv/saset/successor      chanserv/saset/topiclock
- *   chanserv/saset/url       chanserv/saset/noexpire       chanserv/saset/autoop
+ *   chanserv/saset/noexpire
  *
  *   memoserv/sendall        memoserv/staff
  *
@@ -822,7 +831,7 @@ opertype
 	/* The name of this opertype */
 	name = "Services Operator"
 
-	/* What opertype(s) this inherits from. Seperate with a comma. */
+	/* What opertype(s) this inherits from. Separate with a comma. */
 	inherits = "Helper, Another Helper"
 
 	/* What commands (see above) this opertype may use */
@@ -848,7 +857,7 @@ opertype
 
 	inherits = "Services Operator"
 
-	commands = "chanserv/access/list chanserv/drop chanserv/getkey chanserv/saset/noexpire memoserv/sendall nickserv/saset/* nickserv/getemail operserv/news operserv/jupe operserv/svs operserv/stats operserv/oline operserv/noop operserv/forbid global/*"
+	commands = "botserv/* chanserv/access/list chanserv/drop chanserv/getkey chanserv/saset/noexpire memoserv/sendall nickserv/saset/* nickserv/getemail operserv/news operserv/jupe operserv/svs operserv/stats operserv/oline operserv/noop operserv/forbid global/*"
 
 	privs = "*"
 }
@@ -1005,7 +1014,7 @@ mail
 	emailchange_subject = "Email confirmation"
 	emailchange_message = "Hi,
 
-			You have requested to change your email address to %e.
+			You have requested to change your email address from %e to %E.
 			Please type \" /msg NickServ CONFIRM %c \" to confirm this change.
 
 			If you don't know why this mail was sent to you, please ignore it silently.
@@ -1192,23 +1201,14 @@ module
  * encrypted by this module. Old passwords stored in another encryption method are
  * automatically re-encrypted by the primary encryption module on next identify.
  *
- * NOTE: enc_old is Anope's previous (broken) MD5 implementation which is present in
- * versions prior to Anope 1.7.17. If your databases were made using that module,
- * use this and not enc_md5.
- *
- * NOTE: enc_sha1 relies on how the OS stores 2+ byte data internally, and is
- * potentially broken when moving between 2 different OSes, such as moving from
- * Linux to Windows. It is recommended that you use enc_sha256 instead if you want
- * to use an SHA-based encryption. If you choose to do so, it is also recommended
- * that you first try to get everyone's passwords converted to enc_sha256 before
- * switching OSes by placing enc_sha256 at the beginning of the list.
+ * enc_md5, enc_sha1, and enc_old are deprecated, and are provided for users
+ * to upgrade to a newer encryption module. Do not use them as the primary
+ * encryption module. They will be removed in a future release.
  *
  */
 
 #module { name = "enc_bcrypt" }
 module { name = "enc_sha256" }
-#module { name = "enc_md5" }
-#module { name = "enc_sha1" }
 
 /*
  * When using enc_none, passwords will be stored without encryption. This isn't secure
@@ -1216,6 +1216,10 @@ module { name = "enc_sha256" }
  */
 #module { name = "enc_none" }
 
+/* Deprecated encryption modules */
+#module { name = "enc_md5" }
+#module { name = "enc_sha1" }
+
 /*
  * enc_old is Anope's previous (broken) MD5 implementation used from 1.4.x to 1.7.16.
  * If your databases were made using that module, load it here to allow conversion to the primary

data/memoserv.example.conf

@@ -137,7 +137,17 @@ command { service = "MemoServ"; name = "DEL"; command = "memoserv/del"; }
  *
  * Used to ignore memos from specific users.
  */
-module { name = "ms_ignore" }
+module
+{
+	name = "ms_ignore"
+
+	/*
+	 * The maximum number of entries that may be on a memo ignore list.
+	 *
+	 * This directive is optional.
+	 */
+	max = 32
+}
 command { service = "MemoServ"; name = "IGNORE"; command = "memoserv/ignore"; }
 
 /*

data/modules.example.conf

@@ -124,26 +124,58 @@ module { name = "help" }
 		 * %g is the realname of the user
 		 * %h is the hostname of the user
 		 * %i is the IP of the user
-		 * %r is the reason (configured below). Will be nothing if not configured.
+		 * %r is the reply reason (configured below). Will be nothing if not configured.
 		 * %N is the network name set in networkinfo:networkname
 		 */
 		reason = "You are listed in the efnet RBL, visit http://rbl.efnetrbl.org/?i=%i for info"
 
-		/* Replies to ban and their reason. If this is totally omitted all replies get banned. */
-		1 = "Open Proxy"
-		/* Don't ban for result 2 or 3 */
-		#2 = "spamtrap666"
-		#3 = "spamtrap50"
-		4 = "TOR"
-		5 = "Drones / Flooding"
+		/* Replies to ban and their reason. If no replies are configured, all replies get banned. */
+		reply
+		{
+			code = 1
+			reason = "Open Proxy"
+		}
+
+		#reply
+		{
+			code = 2
+			reason = "spamtrap666"
+		}
+
+		#reply
+		{
+			code = 3
+			reason = "spamtrap50"
+		}
+
+		reply
+		{
+			code = 4
+			reason = "TOR"
+
+			/*
+			 * If set, users identified to services at the time the result comes back
+			 * will not be banned.
+			 */
+			#allow_account = yes
+		}
+
+		reply
+		{
+			code = 5
+			reason = "Drones / Flooding"
+		}
 	}
 
-	blacklist
+	#blacklist
 	{
 		name = "dnsbl.dronebl.org"
 		time = 4h
 		reason = "You have a host listed in the DroneBL. For more information, visit http://dronebl.org/lookup_branded?ip=%i&network=%N"
 	}
+
+	/* Exempt localhost from DNSBL checks */
+	exempt { ip = "127.0.0.0/8" }
 }
 
 /*
@@ -211,7 +243,6 @@ module { name = "help" }
 	ldap
 	{
 		server = "ldap://127.0.0.1"
-		port = 389
 
 		/*
 		 * Admin credentials used for performing searches and adding users.
@@ -267,7 +298,9 @@ module { name = "help" }
 	password_attribute = "userPassword"
 
 	/*
-	 * If set, the reason to give the users who try to "/msg NickServ REGISTER".
+	 * If set, the reason to give the users who try to register with nickserv,
+	 * including nick registration from grouping.
+	 *
 	 * If not set, then registration is not blocked.
 	 */
 	#disable_register_reason = "To register on this network visit http://some.misconfigured.site/register"
@@ -507,25 +540,7 @@ module { name = "help" }
  * authenticating users through this mechanism. Supported mechanisms are:
  * PLAIN, EXTERNAL.
  */
-#module { name = "m_sasl" }
-
-/*
- * m_sasl_dh-aes [EXTRA]
- *
- * Add the DH-AES mechanism to SASL.
- * Requires m_sasl to be loaded.
- * Requires openssl.
- */
-#module { name = "m_sasl_dh-aes" }
-
-/*
- * m_sasl_dh-blowfish [EXTRA]
- *
- * Add the DH-BLOWFISH mechanism to SASL.
- * Requires m_sasl to be loaded.
- * Requires openssl.
- */
-#module { name = "m_sasl_dh-blowfish" }
+module { name = "m_sasl" }
 
 /*
  * m_ssl_gnutls [EXTRA]
@@ -540,7 +555,7 @@ module { name = "help" }
 	name = "m_ssl_gnutls"
 
 	/*
-	 * An optional certificate and key for m_gnutls to give to the uplink.
+	 * An optional certificate and key for m_ssl_gnutls to give to the uplink.
 	 *
 	 * You can generate your own certificate and key pair by using:
 	 *
@@ -579,7 +594,7 @@ module { name = "help" }
 	name = "m_ssl_openssl"
 
 	/*
-	 * An optional certificate and key for m_openssl to give to the uplink.
+	 * An optional certificate and key for m_ssl_openssl to give to the uplink.
 	 *
 	 * You can generate your own certificate and key pair by using:
 	 *
@@ -588,6 +603,14 @@ module { name = "help" }
 	 */
 	cert = "data/anope.crt"
 	key = "data/anope.key"
+
+	/*
+	 * As of 2014 SSL 3.0 is considered insecure, but it might be enabled
+	 * on some systems by default for compatibility reasons.
+	 * You can use the following option to enable or disable it explicitly.
+	 * Leaving this option not set defaults to the default system behavior.
+	 */
+	#sslv3 = no
 }
 
 /*

data/nickserv.example.conf

@@ -79,7 +79,7 @@ module
 	confirmemailchanges = no
 
 	/*
-	 * A message sent to users on connect if they use an unregistered nick.
+	 * A message sent to users on connect if they use an unregistered nick. %n will be replaced with the user's nickname.
 	 *
 	 * This directive is optional.
 	 */
@@ -102,10 +102,12 @@ module
 	 * -     hide_quit: Hide's the nick's last quit message
 	 * -   memo_signon: Notify user if they have a new memo when they sign into the nick
 	 * -  memo_receive: Notify user if they have a new memo as soon as it's received
+	 * -     memo_mail: Notify user if they have a new memo by mail
 	 * -        autoop: User will be automatically opped in channels they enter and have access to
 	 * -           msg: Services messages will be sent as PRIVMSGs instead of NOTICEs, requires
 	 *                    options:useprivmsg to be enabled as well
-	 * -  ns_keepmodes: Enables keepmodes, which retains user modes across sessions
+	 * - ns_keep_modes: Enables keepmodes, which retains user modes across sessions
+	 * -  ns_no_expire: Enables no expire. Unconfirmed expire overrules this.
 	 *
 	 * This directive is optional, if left blank, the options will default to ns_secure, memo_signon, and
 	 * memo_receive. If you really want no defaults, use "none" by itself as the option.
@@ -230,7 +232,7 @@ module
 command_group
 {
 	name = "nickserv/admin"
-	description = "Services Operator commands"
+	description = _("Services Operator commands")
 }
 
 /* Give it a help command. */
@@ -380,7 +382,15 @@ command { service = "NickServ"; name = "UNGROUP"; command = "nickserv/ungroup";
  *
  * Used for identifying to accounts.
  */
-module { name = "ns_identify" }
+module
+{
+	name = "ns_identify"
+
+	/*
+	 * If set, limits the number of concurrent users that can be logged in as a given account at once.
+	 */
+	maxlogins = 10
+}
 command { service = "NickServ"; name = "ID"; command = "nickserv/identify"; hide = true; }
 command { service = "NickServ"; name = "IDENTIFY"; command = "nickserv/identify"; }
 
@@ -389,7 +399,7 @@ command { service = "NickServ"; name = "IDENTIFY"; command = "nickserv/identify"
  *
  * Provides the commands:
  * nickserv/info. - Used for gathering information about an account.
- * nickserv/set/hide, nickserv/saset/hide - Used for configuring which options are publically shown in nickserv/info.
+ * nickserv/set/hide, nickserv/saset/hide - Used for configuring which options are publicly shown in nickserv/info.
  *
  */
 module { name = "ns_info" }
@@ -615,6 +625,13 @@ module
 	 * This directive is optional. If not set, the default is never.
 	 */
 	#suspendexpire = 90d
+
+	/*
+	 * Settings to show to non-opers in NickServ's INFO output.
+	 * Comment to completely disable showing any information about
+	 * suspended nicknames to non-opers.
+	 */
+	show = "suspended, by, reason, on, expires"
 }
 command { service = "NickServ"; name = "SUSPEND"; command = "nickserv/suspend"; permission = "nickserv/suspend"; group = "nickserv/admin"; }
 command { service = "NickServ"; name = "UNSUSPEND"; command = "nickserv/unsuspend"; permission = "nickserv/suspend"; group = "nickserv/admin"; }

data/operserv.example.conf

@@ -260,7 +260,7 @@ command { service = "OperServ"; name = "CHANKILL"; command = "operserv/chankill"
 	 */
 	#akillreason = "This network is currently not accepting connections, please try again later."
 }
-#command { service = "OperServ"; name = "DEFCON"; command = "operserv/defcon"; }
+#command { service = "OperServ"; name = "DEFCON"; command = "operserv/defcon"; permission = "operserv/defcon"; }
 
 /*
  * os_dns
@@ -570,10 +570,8 @@ module
 
 	/*
 	 * Sets the default expiry time for session exceptions.
-	 *
-	 * This directive is required if os_session is loaded.
 	 */
-	exceptionexpiry = 1d
+	#exceptionexpiry = 1d
 
 	/*
 	 * The message that will be NOTICE'd to a user just before they are removed from the network because

data/version.sh

@@ -1 +0,0 @@
-git log --pretty=format:"Revision %h - %cD - %s" > version.log

docs/C++CASTING

@@ -21,7 +21,7 @@ The syntax is usually *_cast<type>(var).
 static_cast
 -----------
 
-From my expierence, this cast is closest to C-style casting for non-pointer
+From my experience, this cast is closest to C-style casting for non-pointer
 types as well as between some (but not all) pointer types.  This type of cast,
 like C-style casting, is performed at compile-time.  static_cast can also do
 a downcast of a derived class to a base class, but only if the base class is
@@ -80,7 +80,7 @@ Bad_cast exception.
 
 Note that in Anope we prefer if Anope::debug_cast is used.
 This uses dynamic_cast (and checks for a NULL pointer return) on debug builds
-and static_cast on release builds, to speed up the program beacuse of dynamic_cast's
+and static_cast on release builds, to speed up the program because of dynamic_cast's
 reliance on RTTI.
 
 reinterpret_cast

docs/CODING

@@ -1,4 +1,4 @@
-Orginally pulled from: http://www.inspircd.org/wiki/Coding_Guidelines
+Originally pulled from: http://www.inspircd.org/wiki/Coding_Guidelines
 
 ---
 

docs/Changes

@@ -1,9 +1,128 @@
+Anope Version 2.0.6
+-------------------
+Log client IP for web clients running commands via webcpanel
+Fix log file path for the config file could not be opened log message
+Allow nickserv/group to be used via XMLRPC
+Fix logsearch without wildcards
+Support cidr exempts in m_dnsbl
+Add support for IPv6 dnsbls
+Add +u and +L channel modes for ircd-hybrid
+Set +x after hostserv/off on InspIRCd and UnrealIRCd
+Fix chanserv/mode not being able to set extbans
+Send CHGIDENT/CHGHOST on SVSLOGIN on InspIRCd
+Fix escaping replies from commands in webcpanel
+Enable require_oper for all opers added via operserv/oper
+Advertise SASL mechanisms to UnrealIRCd servers
+
+Anope Version 2.0.5
+-------------------
+Fix negative levels to not match users with negative access
+Fix memo sender to always be the account name of the sender
+Allow unregistered users to use the ChanServ seen command
+Fix secureops to not be enforced on operators with the chanserv/administration privilege
+Fix command name in HELP syntax messages to always be upper case
+Show unconfirmed nickname messages on registration in webcpanel
+Fix NickServ SET EMAIL to be executable via XMLRPC
+Fix OperServ USERLIST/CHANLIST to accept regexes
+Allow OperServ USERLIST to also match realname syntax (n!u@h#r)
+Fix db_old importing languages to use the UTF-8 version
+Fix m_dns to return REFUSED if no answers could be found
+Fix ns_maxemail to be case insensitive
+Add MemoServ READ ALL command
+Add support for NickServ GROUP to be executed via XMLRPC
+Add support for logging hostname/ip of SASL authentication attempts, if supported by IRCd
+
+Anope Version 2.0.4
+-------------------
+Add notice rpc method to XMLRPC
+Fix access check in cs_updown to not allow actions on users with equal access
+Fix randomnews to work when there are more than 'newscount' random news
+Fix crash from handling nick introduction collisions on unreal4
+Add support for GCC6
+Fix handling /join 0 on ratbox
+Fix saset display to update the account of the proper user
+Fix nickserv/confirm to send account and +r when appropriate
+Fix chankill to not add duplicate akills
+Allow nickserv/maxemail to disregard gmail style aliases when comparing emails
+Fix chanserv/mode when setting listmodes with CIDR ranges
+Fix reported expiry time when the time is divisible by 1 year
+Clearify botserv repeat kicker help and allow setting repeat times to 1
+Send vident/vhost with SASL login
+Add support for SASL reauth
+Fix log and database backup directories to be properly created by the installer
+
+Anope Version 2.0.3
+-------------------
+Add support for UnrealIRCd 4
+Fix cs_access to respect chanserv/access/list privilege
+Fix cs_access to match level -1 as every user, not any level <0
+Fix problems related to object destruction order when using db_sql_live
+Show memo notify settings in ms_info
+Fix some actions bumping channels last used time that shouldn't have
+Add maxlogins configuration directive to limit the number of concurrent logins to one account
+Fix race with auto svsnick on ghost sometimes causing nick collisions instead
+Fix saset langauge reply
+Show akill/sxlines ids in VIEW
+Fix crash when an oper is configured in both the configuration and via os_oper
+Fix m_ldap reconnect logic not properly setting protocol and network timeout settings
+Fix crash from unloading regex modules when regex xlines exist
+Fix irc2sql to store away messages
+Add notice method to m_xmlrpc_main
+Fix numerics on InspIRCd from being sent to user UID
+Fix usermode +I on UnrealIRCd to be considered oper only
+Fix crash in webcpanel when deleting your own access on a channel
+Fix webcpanel allowing suspended users to login
+Fix hs_off on InspIRCd to not desync active user host
+Fix bs_bot to not allow colliding bots into users
+Don't allow hostserv modules to load if there is no hostserv
+Fix ns_register allowing bot nicks to be registered through webcpanel
+Don't update chanserv keepmodes during inhabit
+Fix build on cmake 2.4
+Allow searching emails by wildcard in ns_getemail
+
+Anope Version 2.0.2
+-------------------
+Fix keepmodes preventing the first user of a channel from being deopped
+Fix SQlines that don't begin with # from matching channels
+Made cs_clone behave like the help describes, copying many settings and lists by default
+Allow cs_clone to clone levels, too
+Update Hybrid protocol module for 8.2
+Fix not unescaping all characters sent over XMLRPC
+Fix crash when os_mode is used to destroy channels, like when unsetting permanent channel mode from an empty channel
+Allow users with topic change privilege to change the topic instead of requiring them to use ChanServ's topic command
+Fix negatively locking param modes in default mlock
+Change entrymsg to check for the SET privilege, not real founder
+Allow configuring characters allowed in nicknames
+Fix crash when non users register channels externally (like XMLRPC)
+Remove operserv/exception MOVE, it did not function correctly. Instead reorder the list by deleting/adding entries.
+Allow flood ttb to be 0.
+Enforce mlock when disabling defcon modes
+Fix cs_mode not being able to apply mlock on register
+Add log message when users send memos
+Fix old collide timers from staying around after successful identify. Fixes being able to identify and logout and still being hit by the old timers.
+Fix undefined behavior in cs_mode which usually crashes when clearing large list modes
+Show all opertypes in operserv/info, even if no opers use them
+
+Anope Version 2.0.1
+-------------------
+Fix access entries on accounts sometimes not updating when a user's display name changes
+Fix ns_group to properly validate the account of the user against the target
+Fix os_stats not saving max user count and time when using SQL
+Fix nickalias's 'nc' field sometimes not being updated when using SQL
+Fix several crashes on Windows related to being unable to load modules
+Fix bs_bot change not properly reintroducing bots after changing their ident, host, or realname
+
+Add English language file to allow users to easily modify language strings
+Add configuring which mode cs_ban sets, and added a MUTE command to BotServ's fantasy
+Allow SVSPART to take an optional reason
+Allow cs_list to search channel topics and descriptions
+
 Anope Version 2.0.0
 -------------------
 Added irc2sql stats module
 
 Anope Version 1.9.9
---------------------
+-------------------
 A Added a better webpanel template, removed the old one
 A Added SQL logging support
 A Added Redis database support
@@ -15,7 +134,7 @@ F Fixed setting BotServ's default settings in the config
 F Fixed some names of config items, including NickServ's kill protect
 
 Anope Version 1.9.8
---------------------
+-------------------
 A Ability to configure fantasy commands in the config
 A Add SVSJOIN and SVSPART commands
 F Fix "leave" channel log level from not logging
@@ -27,7 +146,7 @@ F Fix crash in os_forbid with expiring entries
 F Fix several issues with db_sql_live
 
 Anope Version 1.9.7
---------------------
+-------------------
 A Added ability for using regex as patterns for various commands
 A Extended ability of operserv/akill to also match against nick and realname
 A Added chanserv:require configuration option
@@ -37,7 +156,7 @@ A Added a web panel
 A db_sql_live now allows all tables to be "live", not just a select few
 
 Anope Version 1.9.6
---------------------
+-------------------
 A Added ability to configure emails sent by services
 A Added chanserv/up and chanserv/down
 A Added m_proxyscan
@@ -56,7 +175,7 @@ F Fixed crash in /os oper info
 F Fixed eventfd Config check to work properly on OpenVZ
 
 Anope Version 1.9.5
---------------------
+-------------------
 A Extended LDAP support
 A Added os_oper, os_kill, os_forbid, m_statusupdate, cs_sync, and bs_autoassign
 A Added a new configuration file format
@@ -74,7 +193,7 @@ F Fixed setting -P on channels with only a botserv bot in it
 F Fixed modemanager complaining about prefixless modes on InspIRCd
 
 Anope Version 1.9.4
---------------------
+-------------------
 A Automatically set channel founder to the user with the highest access if there is no successor
 A /chanserv clone command to copy settings from one channel to another.
 A /chanserv mode command
@@ -95,7 +214,7 @@ F Some failed logic in /operserv exception that prevents proper exceptions from
 F Fixed the anope_os_sxlines MySQL table and code to work after restarting
 
 Anope Version 1.9.3
---------------------
+-------------------
 A Added italics BotServ kicks support
 A Tell users when their nicks expire in /ns glist and /ns info
 A Added SSL support
@@ -122,7 +241,7 @@ F Anoperc start/stop to send the globaloncycle global, and fixed anoperc rehash
 F Fixed a potential crash if HostServ or BotServ was disbled
 
 Anope Version 1.9.2
---------------------
+-------------------
 A K alias to chanserv kick command
 A KB alias to chanserv ban command
 A The ability to register empty nonregistered channels
@@ -136,8 +255,8 @@ A Added ns_resetpass module to the core
 A CS ACCESS VIEW which shows who added the access and last time used
 A Last used time to CS AKICK VIEW
 A Added a sha_256 encryption module
-A Added the ability to load multiple encryption modules, and the ability to seamlessly convert your database between diferent encryptions
-A Added configuration options to allow Anope to reconnect if it disconnects from the uplink instead of dieing
+A Added the ability to load multiple encryption modules, and the ability to seamlessly convert your database between different encryptions
+A Added configuration options to allow Anope to reconnect if it disconnects from the uplink instead of dying
 A Added support for linking with IPv6
 F Unban command to accept an optional nick arg
 F Some typos in services.conf
@@ -153,7 +272,7 @@ F ms_rsend to really work
 F SQUITing juped servers on InspIRCd1.2+
 
 Anope Version 1.9.1
---------------------
+-------------------
 F Don't enforce akick/forbidden/etc.-restrictions on clients on ulined servers.
 F Remove modules_unload_all fini + hack that goes with it.
 F Signal handling cleanup.
@@ -194,7 +313,7 @@ Provided by Liber <Liber@jasonirc.net> - 2009
 F Support operoverride and such things (stop reversing changes from nonopped people where unnecessary)
 
 Anope Version 1.9.0
---------------------
+-------------------
 F Modified compile to use g++
 F Improve protocol modules support (classes, virtual methods, etc)
 F Move core services to use BotInfo

docs/Changes.conf

@@ -1,3 +1,42 @@
+Anope Version 2.0.6
+-------------------
+Mark enc_md5 and enc_sha1 as deprecated. Their use has been discouraged for years, and they will be removed in a future release.
+Exempt all of 127.0.0.0/8 from m_dnsbl by default
+Load m_sasl by default
+Fix documentation for nickserv default option ns_keep_modes
+
+Anope Version 2.0.5
+-------------------
+No significant changes.
+
+Anope Version 2.0.4
+-------------------
+Removed m_sasl_dh-aes and m_sasl_dh-blowfish
+
+Anope Version 2.0.3
+-------------------
+Add operserv/chankill to default globops log
+Add ns_identify:maxlogins to limit the max number of concurrent logins per account
+Document ns_no_expire nickserv default
+Remove default session exception expiry time
+
+Anope Version 2.0.2
+-------------------
+Add an operserv/oper/modify privilege, required to use oper add and oper del
+Add a chanserv/access/list privilege, which allow readonly access to ChanServ access and akick lists
+Changed m_dnsbl's result configuration to be more extensible
+Add 'max' setting to cs_mode
+Add 'nickchars' setting to networkinfo
+Add 'botserv/fantasy', 'chanserv/access/list', and 'operserv/oper/modify' oper privileges
+Fix 'emailchange_message' to include the proper email address
+Set a default permission on operserv/defcon
+
+Anope Version 2.0.1
+-------------------
+Add MUTE command to BotServ fantasy configuration
+Document memo_mail option in nickserv.conf
+Add 'show' setting to ns_info and cs_info to control which fields are shown to non opers
+
 Anope Version 2.0.0
 -------------------
 options:passlen, enforceruser, enforcerhost, releasetimeout, and guestnickprefix moved to nickserv's module configuration
@@ -68,7 +107,7 @@ opertype:commands removed operserv/umode
 operserv:modules removed os_umode
 
 Anope Version 1.9.3
-------------------
+-------------------
 ** ADDED    CONFIGURATION DIRECTIVES **
 nickserv/auspex privilege added
 SSL module added for SSL support
@@ -102,7 +141,7 @@ networkinfo:logchannel, logbot, logusers, logmaxusers, logchannel, and options:k
 dumpcore because it really didn't do anything
 
 Anope Version 1.9.2
---------------------
+-------------------
 ** ADDED    CONFIGURATION DIRECTIVES **
 options:enablelogchannel added to auto turn on the logchannel on startup
 options:mlock added to configure the default mlock modes on new channels

docs/DEFCON

@@ -1,4 +1,4 @@
-Anope DefCon 
+Anope DefCon
 ------------
 
 1) Introduction
@@ -11,7 +11,7 @@ Anope DefCon
 1) Introduction
 
     Anope 1.6 onwards supports a unique protection mechanism based on the
-    military "Defense Readiness Condition" (DefCon) system. It is based on 
+    military "Defense Readiness Condition" (DefCon) system. It is based on
     5 levels of defense readiness defined as:
 
     DEFCON5 Normal peacetime readiness
@@ -23,9 +23,9 @@ Anope DefCon
     These are configurable levels that mandates what actions Anope should
     take in case of emergency and change in readiness status.
 
-    It is used to prevent abuse to both Services, and the ircd on which they 
+    It is used to prevent abuse to both Services, and the ircd on which they
     are running. Also to protect the users, primarily in the event of Clones
-    and/or FloodBOT attacks. 
+    and/or FloodBOT attacks.
 
 2) Installation
 
@@ -44,26 +44,26 @@ Anope DefCon
 
     Pre-defined DefCon actions:
 
-    No new channel registrations 
-    No New Nick Registrations 
+    No new channel registrations
+    No New Nick Registrations
     No Mode Lock changes
-    Force Chan Mode 
-    Use Reduced Session Limit 
-    KILL any new clients trying to connect 
-    Services will ignore everyone but opers 
-    Services will silently ignore everyone but opers 
-    AKILL all new clients trying to connect 
+    Force Chan Mode
+    Use Reduced Session Limit
+    KILL any new clients trying to connect
+    Services will ignore everyone but opers
+    Services will silently ignore everyone but opers
+    AKILL all new clients trying to connect
     No new memos sent to block MemoServ attacks
-    
+
     Information regarding how to enable this for specific defcon levels can
     be found in operserv.conf
 
 4) Usage
 
-    Anope starts up in DEFCON5 (normal readiness). To change the Defcon level 
-    in action use: 
-    
-    /msg OperServ DEFCON 1|2|3|4|5 
+    Anope starts up in DEFCON5 (normal readiness). To change the Defcon level
+    in action use:
+
+    /msg OperServ DEFCON 1|2|3|4|5
 
 5) Usage Example
 
@@ -89,6 +89,5 @@ Anope DefCon
 
 6) Support
 
-    You might get DefCon support by posting on our online forum, or maybe on 
+    You might get DefCon support by posting on our online forum, or maybe on
     our #anope channel at /server irc.anope.org.
-

docs/EVENTS

@@ -32,4 +32,3 @@ Anope Internal Events
 
     The "anope_override" identifier is for compatibility with C++11.
     Its usage is highly recommended.
-

docs/FAQ

@@ -1,10 +1,10 @@
 Frequently Asked Questions (FAQ) concerning Anope
-------------------------------------------------
- 
+-------------------------------------------------
+
 The information in the 1.9 FAQ is subject to change at any
 moment due to new developments. Please visit our website
 for the most up to date information.
- 
+
 An updated version of the FAQ can be found here:
 
 http://wiki.anope.org/index.php/FAQ

docs/INSTALL

@@ -21,26 +21,19 @@ Note: You should also read the README and FAQ files!
 
         http://www.anope.org/
 
-    Anope can be built one of two ways. The recommended way is to use CMake.
-    You can check if CMake is already installed on your system using the
-    command:
+    Anope requires cmake to build. You can check if CMake is already
+    installed on your system using the command:
 
         cmake --version
 
     If it's installed, you will get a line that says something similar to
-    "cmake version 2.6-patch 1". If the version is less than 2.4 or you get
+    "cmake version 2.8.12.2". If the version is less than 2.4 or you get
     an error saying the command was not found, you will not be able to use
     CMake unless you install it yourself into your home directory. CMake
     can be downloaded from:
 
         http://www.cmake.org/cmake/resources/software.html
 
-    If you are unable to install CMake yourself (either due to lack of space
-    or restrictions by your hosting provider), you still have the alternative
-    to use the provided configure script. This option is not recommended and
-    will eventually be phased out, but is provided for compatibility for those
-    lacking CMake.
-
     Next, unpack the package in your home directory, and go into the created
     directory.
 
@@ -51,16 +44,8 @@ Note: You should also read the README and FAQ files!
     Now type ./Config to start the configuration script. It will ask you a
     few questions, and figure out how to compile Anope on your system. If
     you are unsure about the answer to a question, use the default value.
-    The question to using configure or cmake depends on your decision from
-    above. If you have CMake and wish to use it, answer with cmake, otherwise
-    answer with configure.
 
-    You can now type make to compile Anope. If there are errors in the
-    Makefile, *try to use gmake* instead. If it still doesn't work, you (or
-    the system administrator if it's a shell) must install GNU make. You may
-    find it at ftp://prep.ai.mit.edu/pub/gnu/.
-
-    Now type make install (or gmake install; see above). This will install
+    Now cd build and type make and make install. This will install
     all the needed files in the paths you specified with the configure
     script, and setup file permissions. You should ensure that the data
     directory is not accessible by other users, as malicious users may
@@ -75,7 +60,7 @@ Note: You should also read the README and FAQ files!
     most likely not work!
 
     If you need help, you should visit http://forum.anope.org/ or #anope on
-    irc.anope.org. Provide *complete* error output, along with other relevant 
+    irc.anope.org. Provide *complete* error output, along with other relevant
     information eg. OS, compiler and C++ library versions.
     See the README file for more information.
 
@@ -131,8 +116,8 @@ Note: You should also read the README and FAQ files!
     still running, and restart it if not.
 
     First rename the example.chk script that is in Anope path (by default,
-    this is ~/services/conf) to services.chk and edit it. You'll need to 
-    modify the CONFIGURATION part of the file. Then ensure that the file is 
+    this is ~/services/conf) to services.chk and edit it. You'll need to
+    modify the CONFIGURATION part of the file. Then ensure that the file is
     marked as executable by typing chmod +x services.chk, and try to launch the
     script to see if it works (Anope must not be running when you do this ;))
 

docs/INSTALL.fr

@@ -1,5 +1,5 @@
 Instructions d'installation d'Anope
-------------------------------------
+-----------------------------------
 
 1) Installation d'Anope
 2) Mettre à jour Anope
@@ -11,148 +11,139 @@ Note : Vous devrez également lire les fichiers README et FAQ !
 
 1) Installation d'Anope
 
-    NOTE IMPORTANTE : il n'est pas recommandé d'utiliser (et même d'installer)
-                     Anope en tant que root. Utilisez un utilisateur non 
-		     privilégié. Celui que vous utilisez pour l'IRCd ou un
-		     utilisateur dédié suffira.
+    NOTE IMPORTANTE : il est déconseillé d'utiliser (et même d'installer)
+                      Anope en tant que root. Utilisez un utilisateur non
+                      privilégié. Celui que vous utilisez pour l'IRCd ou
+		              un utilisateur dédié suffira.
 
-    La première chose que vous devez faire est d'obtenir le package Anope (si ce 
-    n'est déjà fait). Vous pouvez le trouver ici :
+    La première chose que vous devez faire est d'obtenir le package Anope
+    (si ce n'est déjà fait). Vous pouvez le trouver ici :
 
-         http://www.anope.org/
+        http://www.anope.org/
 
-    Anope peut être installé de deux façons. La méthode recommandée est 
-    d'utiliser CMake. Vous pouvez vérifier si CMake est déjà installé 
-    sur votre système en utilisant la commande :
+    Anope nécessite cmake pour être compilé. Vous pouvez vérifier si CMake
+    est déjà installé sur votre système avec la commande :
 
         cmake --version
 
-    Si CMake est installé, vous aurez une ligne qui dit quelque chose similaire 
-    à "cmake version 2.6 cmake-patch 1". Si la version est inférieure à 2.4 ou 
-    si vous obtenez une erreur disant que la commande n'a pas été trouvée, 
-    vous ne serez pas en mesure d'utiliser CMake, sauf si vous l'installez 
-    vous-même dans votre répertoire home. CMake peut être téléchargé ici : 
+    Si CMake est installé, vous aurez une ligne qui dit quelque chose comme
+    "cmake version 2.8.12.2". Si la version est inférieure à 2.4 ou si vous
+    obtenez une erreur disant que la commande n'a pas été trouvée, vous ne
+    pourrez pas utiliser CMake à moins de l'installer vous-même dans votre
+    répertoire home. CMake peut être téléchargé ici :
 
         http://www.cmake.org/cmake/resources/software.html
 
-    Si vous n'arrivez pas à l'installer (soit en raison du manque d'espace
-    ou de restrictions par votre fournisseur d'hébergement), vous pouvez encore
-    utiliser le script de configuration fourni. Cette option n'est pas 
-    recommandée et finira par être retirée, mais est fournie pour la 
-    compatibilité de ceux à qui il manque CMake.
+    Ensuite, décompressez le package dans votre répertoire home, et allez
+    dans le répértoire qui vient d'être créé.
 
-    Ensuite, décompressez le package dans votre répertoire home, et allez dans 
-    le répértoire qui vient d'être créé.
+    Si il y a des modules facultatifs que vous voulez activer comme m_mysql,
+    exécuter le script 'extras' pour les activer. Si vous ne savez pas, vous
+    pouvez les activer plus tard.
 
-    Maintenant, tapez ./Config pour lancer le script de configuration. Il va 
-    vous poser quelques questions, et compiler Anope sur votre système. Si vous
-    ne savez pas répondre à une question, utilisez la valeur par défaut. La 
-    question d'utiliser CMake ou configure dépend de la décision que vous avez 
-    prise précedemment. Si vous avez CMake et que vous souhaitez l'utiliser, 
-    répondez avec cmake, sinon répondez avec configure.
+    Maintenant, tapez ./Config pour lancer le script de configuration. Il
+    va vous poser quelques questions, et déterminer comment compiler Anope
+    sur votre système. Si vous ne savez pas comment répondre à une question,
+    utilisez la valeur par défaut.
 
-    Vous pouvez maintenant taper make pour compiler Anope. S'il y'a des erreurs
-    dans le Makefile, *essayez d'utiliser* gmake à la place. Si cela ne 
-    fonctionne toujours pas, vous (ou votre administrateur système) devriez
-    installer GNU make. 
-    Vous pouvez le trouver ici : ftp://prep.ai.mit.edu/pub/gnu/.
+    Allez dans le dossier build (cd build) et tapez make et make install.
+    Ceci va installer tous les fichiers nécessaires dans les dossiers que
+    vous avez indiqués avec le script Config et régler les permissions des
+    fichiers. Vous devez vous assurer que le répertoire data n'est pas 
+    accessible par les autres utilisateurs, car des utilisateurs
+    malveillants pourraient causer des problèmes sur votre réseau, si les
+    mots de passe ne sont pas chiffrés, ou lire les mémos de tous les
+    utilisateurs.
 
-    Maintenant, tapez make install (ou gmake install ; voir ci-dessus). Cela
-    permet d'installer tous les fichiers nécessaires dans les chemins que vous
-    avez spécifié au script configure, et de régler les permissions des fichiers.
-    Vous devez vous assurer que le répertoire data n'est pas accessible par les 
-    autres utilisateurs, des utilisateurs malveillants pourraient causer des
-    problèmes sur votre réseau, si les mots de passe ne sont pas chiffrés, 
-    ou lire les mémos de tout utilisateur.
+    Allez maintenant dans le répertoire conf (par défaut, ~/services/conf).
+    Copiez l'exemple de fichier de configuration (example.conf) en
+    services.conf et ouvrez ce dernier avec votre éditeur de texte favori.
+    Il contient toutes les directives de configuration qu'Anope va utiliser
+    en démarrant. Lisez attentivement les instructions contenues dans le
+    fichier. L'utilisation des valeurs par défaut n'est pas toujours
+    recommandée, et Anope ne fonctionnera probablement pas !
 
-    Si vous voyez des erreurs lors de ce processus, merci de nous envoyer un 
-    e-mail avec la sortie d'erreur *complète* et n'oubliez pas de mentionner 
-    les versions de votre système, compilateur et bibliothèque C++.
-
-    Allez maintenant dans le répertoire de données (par défaut, ~/services/data).
-    Copiez l'exemple de fichier de configuration (example.conf) en services.conf
-    et ouvrez ce dernier avec votre éditeur de texte favori. Il contient toute 
-    les directives de  configuration. Anope va l'utiliser au démarrage. 
-    Lisez attentivement les instructions contenues dans le fichier. 
-    L'utilisation des valeurs par défaut n'est pas recommendé et Anope ne 
-    fonctionnera probablement pas.
-
-    Si vous avez besoin d'aide, abonnez-vous à la liste de diffusion Anope
-    et envoyez-y vos e-mails pour obtenir de l'aide de la part des autres
-    utilisateurs. Voir le fichier README pour plus d'informations.
+    Si vous avez besoin d'aide, vous pouvez aller sur le site
+    http://forum.anope.org/ ou le canal #anope sur irc.anope.org.
+    Fournissez *l'essemble* des erreurs qui apparaîssent, en plus de
+    toutes informations utiles, comme les versions de votre OS, du
+    compilateur utilisé et de la librairie C++. Lisez le fichier README
+    pour plus d'informations.
 
 2) Mettre à jour Anope
 
-    Pour mettre à jour Anope, suivez simplement les instructions d'installation
-    décrites dans la section 1. Il y a cependant une ligne de conduite 
-    spécifique :
+    Pour mettre à jour Anope, suivez simplement les instructions
+    d'installation décrites dans la section 1. Prenez garde cependant :
 
         * IMPORTANT : Sauvegardez vos anciennes bases de données !
-        * Si vous mettez à jour vers une nouvelle version majeure, toujours 
-	  redémarrer avec un fichier de configuration neuf depuis example.conf.
+        * Si vous mettez à jour vers une nouvelle version majeure,
+          recommencez *toujours* toute votre configuration à partir du
+          fichier example.conf.
 
 3) Configuration de l'IRCd
 
-    Les Services agissent comme un serveur IRC avec des pseudo-clients. 
-    Pour les relier à votre réseau, vous aurez besoin de configurer votre IRCd
-    pour permettre aux services de linker.
+    Les Services agissent comme un serveur IRC avec des pseudo-clients.
+    Pour les relier à votre réseau, vous aurez besoin de configurer votre
+    IRCd pour permettre aux services de se connecter.
 
-    La configuration varie selon les IRCd, mais vous aurez probablement besoin
-    d'un block link (aussi appelé connect block, ou C line), un U line (aussi
-    appelé shared block) et assurez-vous que l'IRCd écoute sur le port donné
-    dans le block link.
+    La configuration dépend de l'IRCd utilisé, mais vous aurez probablement
+    besoin d'un bloc link (aussi appelé connect block, ou C:line) et un
+    U:line (aussi appelé shared block). Assurez-vous que l'IRCd écoute
+    sur le port donné dans le bloc link.
 
-    Des exemples de configurations de link peuvent être trouvés dans le fichier
-    example.conf pour certains des IRCd les plus populaires.
+    Des exemples de configurations de bloc link peuvent être trouvés dans
+    le fichier example.conf pour certains des IRCd les plus populaires.
 
     Souvenez-vous de /rehash votre IRCd pour appliquer les changements.
 
-    Vous pouvez également essayer notre créateur de link interactif situé ici :
+    Vous pouvez également essayer notre créateur de bloc link interactif
+    situé ici :
 
         http://anope.org/ilm.php
 
 4) Mettre en route Anope
 
-    Allez dans le répertoire où les fichiers binaires ont été installés (par 
-    défaut, ~/services/bin). Tapez ./services pour lancer Anope.
+    Allez dans le répertoire où les fichiers binaires ont été installés
+    (par défaut, ~/services/bin). Tapez ./services pour lancer Anope.
 
-    S'il ya des erreurs de syntaxe dans le fichier de configuration, elles 
-    seront affichées sur l'écran. Corrigez-les jusqu'à ce qu'il n'y en ait plus.
-    Un démarrage réussi ne générera pas de message.
+    S'il y a des erreurs de syntaxe dans le fichier de configuration, elles
+    seront affichées à l'écran. Corrigez-les jusqu'à ce qu'il n'y en ait
+    plus. Un démarrage réussi ne générera pas de message.
 
-    Donnez aux services au moins une minute pour se connecter à votre réseau. 
-    Certains IRCds sur certains systèmes peuvent être très lents pour le 
-    processus de liaison. Si rien n'arrive après environ une minute, il y a
-    probablement un problème de configuration. Essayez de lancer Anope en mode
-    debug ./services -debug -nofork pour voir toutes les erreurs rencontrées
-    et essayez de les corriger.
+    Donnez aux services au moins une minute pour se connecter à votre
+    réseau, car certains IRCds sur certains systèmes peuvent être très
+    lents pour le processus de liaison. Si rien ne se passe après environ
+    une minute, il y a probablement un problème de configuration. Essayez
+    de lancer Anope en mode debug avec ./services -debug -nofork pour voir
+    toutes les erreurs rencontrées et essayez de les corriger.
 
-    Si vous avez besoin d'aide pour résoudre des erreurs, n'hésitez pas à vous
-    abonner à la liste de diffusion Anope et d'y poser vos question. 
+    Si vous avez besoin d'aide pour résoudre des erreurs, n'hésitez pas à
+    vous abonner à la liste de diffusion Anope et d'y poser vos question.
     Voir le fichier README pour plus de détails.
 
 5) Mettre en place un crontab
 
-    Une entrée crontab vous permettra de vérifier périodiquement si Anope est
-    toujours en cours d'exécution et de le redémarrer s'il n'est pas.
+    Une entrée crontab vous permettra de vérifier périodiquement si Anope
+    est toujours en cours d'exécution et de le redémarrer s'il n'est pas.
 
-    D'abord renommez le script example.chk qui est dans le chemin d'Anope 
-    (par défaut, ~/services/data) en services.chk et modifiez-le. Vous aurez 
-    besoin de modifier la partie CONFIGURATION du fichier. Assurez-vous ensuite
-    que le fichier est marqué comme exécutable en tapant chmod +x services.chk
-    et essayez de lancer le script pour voir si cela fonctionne (Anope ne doit 
-    pas être en marche lorsque vous faites cela ;))
+    D'abord renommez le script example.chk qui est dans les dossiers
+    d'Anope (par défaut, ~/services/conf) en services.chk et modifiez-le.
+    Vous aurez besoin de modifier la partie CONFIGURATION du fichier.
+    Assurez-vous ensuite que le fichier est marqué comme exécutable en
+    tapant chmod +x services.chk et essayez de lancer le script pour voir
+    si cela fonctionne (Anope ne doit pas être en marche lorsque vous
+    testez cela ;))
 
-    Lorsque c'est fait, vous devrez ajouter l'entrée crontab. Tapez crontab -e. 
-    Cela va ouvrir l'éditeur de texte par défaut avec le fichier crontab.
-    Entrez la ligne suivante (avec le chemin correct) :
+    Lorsque c'est fait, vous devrez ajouter l'entrée crontab. Entrez
+    crontab -e. Cela va ouvrir l'éditeur de texte par défaut avec le
+    fichier crontab. Entrez la ligne suivante (avec le chemin correct) :
 
-        */5 * * * * /home/ircd/services/data/services.chk > /dev/null 2>&1
+        */5 * * * * /home/ircd/services/conf/services.chk > /dev/null 2>&1
 
     Le */5 au début signifie "vérifier toutes les 5 minutes". Vous pouvez
-    remplacer le 5 par un autre numéro si vous voulez (mais moins de 60). 
-    Consultez pages de manuel de votre système pour plus de détails sur la 
-    syntaxe du fichier crontab. Les pages de manuel intéressantes sont
+    remplacer le 5 par un autre numéro si vous voulez (mais moins de 60).
+    Consultez les pages de manuel de votre système pour plus de détails sur
+    la  syntaxe du fichier crontab. Les pages de manuel intéressantes sont
     crontab(5), crontab(1) et cron(8).
 
-    Sauvegardez, quittez et c'est installé.
+    Sauvegardez, quittez, et c'est installé !

docs/MODULES

@@ -117,7 +117,7 @@ Anope Modules
 
     There are a number of useful documents on the Anope Wiki. The Anope Wiki
     can be reached at:
-    
+
     * http://wiki.anope.org/
 
 8) Modules Repository

docs/NEWS

@@ -4,4 +4,3 @@ Highlighted News in Anope 1.9
 * Added in live updating SQL and the ability to execute commands through SQL
 * Re-designed configuration file
 * Code refresh / rewrite into C++
-

docs/README

@@ -1,7 +1,7 @@
 Anope -- a set of IRC services for IRC networks
 -----------------------------------------------
 
-Anope is          2003-2014 Anope Team    <team@anope.org>.
+Anope is          2003-2017 Anope Team    <team@anope.org>.
 Based on Epona    2000-2002 PegSoft       <epona@pegsoft.net>.
 Based on Services 1996-1999 Andrew Church <achurch@achurch.org>.
 
@@ -9,8 +9,6 @@ This program is free but copyrighted software; see the file COPYING for
 details.
 
 Information about Anope may be found at http://www.anope.org/
-Information about Epona may be found at http://www.epona.org/
-Information about Services may be found at http://www.ircservices.esper.net/
 
 Table of Contents
 -----------------
@@ -19,7 +17,7 @@ Table of Contents
 3) Installation
 4) Command Line Options
 5) Messages Translation
-6) Contact and Mailing List
+6) Contact
 
 1) Credits
 
@@ -107,11 +105,11 @@ Table of Contents
 
     Anope Translations:
 
-        * Robby <robby@chat.be> (nl_NL)
+        * Robby <robby@chatbelgie.be> (nl_NL)
         * Kein <kein-of@yandex.ru> (ru_RU)
         * Maik Funke <Han@mefalcon.org> (de_DE)
         * Isaac Fontal <i_fontal@hotmail.com> (es_ES)
-        * Janos Kapitany <sarkanyka@cjbchat.hu>  (hu_HU)
+        * Janos Kapitany <sarkanyka@cjbchat.hu> (hu_HU)
         * Szymon S'wierkosz <szymek@adres.pl> (pl_PL)
         * Christopher N. <saka@epiknet.org> (fr_FR)
         * Yusuf Kurekci <ysfm.20@gmail.com> (tr_TR)
@@ -170,12 +168,12 @@ Table of Contents
 
         * Bahamut 1.4.27 or later (including 1.8)
         * Charybdis 3.4 or later
-        * Hybrid 8.1 or later
+        * Hybrid 8.2 or later
         * InspIRCd 1.2 or 2.0
         * ngIRCd 19.2 or later
         * Plexus 3 or later
         * Ratbox 2.0.6 or later
-        * UnrealIRCd 3.2 or later
+        * UnrealIRCd 3.2 or 4
 
     Anope could also work with some of the daemons derived by the ones listed
     above, but there's no support for them if they work or don't work.
@@ -247,9 +245,9 @@ Table of Contents
 
     If you read the documentation carefully, and didn't find the answer to
     your question, feel free to post on the website forums or join our irc
-    channel (irc.anope.org #anope). Once you join our Support channel be as 
+    channel (irc.anope.org #anope). Once you join our Support channel be as
     precise as possible when asking a question, because we have no extraordinary
-    powers and can't guess things if they aren't provided. 
+    powers and can't guess things if they aren't provided.
 
     The more precise you are the sooner you'll be likely to get an answer.
 

docs/REDIS

@@ -14,7 +14,7 @@ Table of Contents
 1) Data structure
 
     There are 4 key namespaces in Anope, they are:
-    
+
         id -    The keys in id are used to atomically create object ids for new
                 objects. For example, if I were to create a new BotInfo I would first:
 
@@ -152,7 +152,7 @@ Table of Contents
         HMSET hash:BotInfo:8 nick redis user redis host services.anope.org realname "Services for IRC Networks"
 
         Note if you are using HSET instead of HMSET you will need to use a transaction, as shown in the above example.
-        If you are watching your services logs you will immediatly see:
+        If you are watching your services logs you will immediately see:
 
         USERS: redis!redis@services.anope.org (Services for IRC Networks) connected to the network (services.anope.org)
 

docs/TOOLS

@@ -20,7 +20,6 @@ Anope Bundled Tools
     address. This should generate a log file of what happened when it tried
     to connect to the SMTP server.
 
-        Credits:
-    Originally written by  Dominick Meglio    <codemastr@unrealircd.com>
-    Ported to *nix by      Trystan Scott Lee  <trystan@nomadirc.net>
-
+    Credits:
+        Originally written by  Dominick Meglio    <codemastr@unrealircd.com>
+        Ported to *nix by      Trystan Scott Lee  <trystan@nomadirc.net>

docs/WIN32.txt

@@ -73,18 +73,10 @@ Anope for Windows
        Some Anope modules require third party libraries, such as m_mysql and
        the SSL modules. If these libraries are installed in nonstandard
        locations, cmake will probably not find them and should be told where
-       they are by passing additional search paths to the last question in
-       Config, such as:
+       they are by passing their location to Config.
 
-       -DEXTRA_INCLUDE:STRING=c:/openssl/include;c:/mysql/include
-       -DEXTRA_LIBS:STRING=c:/openssl/lib;c:/mysql/lib
-
-       Building Anope with gettext requires libintl, libiconv, libgcc and
-       libmingex. We have precompiled these libraries for you that you may
-       use if you want. They are avaiable at http://anope.org/downloads/anope-extra.zip
-       The OpenSSL, MySQL, and OpenLDAP header files and libraries are also included in
-       this package. Once downloaded and extracted, you should run install.bat
-       then give Config the path to the new 'installed' directory.
+       The libraries used to build the 'extra' modules are available at
+       https://github.com/Adam-/windows-scripts.
 
     5) You are now ready to compile. If you said you wanted to use NMake in step 4,
        at the prompt type:
@@ -167,4 +159,3 @@ Anope for Windows
     Anope's Windows Installer was made using:
 
         * NSIS 2.20          <http://nsis.sourceforge.net>
-

docs/XMLRPC/XMLRPC

@@ -3,11 +3,11 @@ This allows external applications, such as websites, to execute remote procedure
 
 Currently there are 5 supported XMLRPC calls, provided by m_xmlrpc_main:
 
-checkAuthetication - Takes two parameters, an account name and a password. Checks if the account name is valid and the password
-                     is correct for the account name, useful for making login pages on websites.
+checkAuthentication - Takes two parameters, an account name and a password. Checks if the account name is valid and the password
+                      is correct for the account name, useful for making login pages on websites.
 
 command - Takes three parameters, a service name (BotServ, ChanServ, NickServ), a user name (whether online or not), and the command
-          to execute. This will execute a the given command to Anope using the given service name. If the user given is online, the
+          to execute. This will execute the given command to Anope using the given service name. If the user given is online, the
 	  command reply will go to them, if not it is returned by XMLRPC.
 
 stats - Takes no parameters, returns miscellaneous stats that can be found in the /operserv stats command.
@@ -17,10 +17,13 @@ channel - Takes one parameter, a channel name, and returns real time information
 
 user - Takes one parameter, a user name, and returns real time information regarding that user.
 
+opers - Takes no parameters, returns opertypes, their privileges and commands.
+
+notice - Takes three parameters, source user, target user, and message. Sends a message to the user.
+
 XMLRPC was designed to be used with db_sql, and will not return any information that can be pulled from the SQL
 database, such as accounts and registered channel information. It is instead used for pulling realtime data such
 as users and channels currently online. For examples on how to use these calls in PHP, see xmlrpc.php in docs/XMLRPC.
-          
+
 Also note that the parameter named "id" is reserved for query ID. If you pass a query to Anope containing a value for id. it will
 be stored by Anope and the same id will be passed back in the result.
-

docs/XMLRPC/xmlrpc.php

@@ -1,90 +1,145 @@
 <?php
-/* XMLRPC Functions
+
+/**
+ * XMLRPC Functions
  *
- * (C) 2003-2014 Anope Team
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
- *
  */
 
 class AnopeXMLRPC
 {
-	private $Host;
+    /**
+     * The XMLRPC host
+     *
+     * @var string
+     */
+    private $host;
 
-	function __construct($Host)
-	{
-		$this->Host = $Host;
-	}
+    /**
+     * Initiate a new AnopeXMLRPC instance
+     *
+     * @param $host
+     */
+    public function __construct($host)
+    {
+        $this->host = $host;
+    }
 
-	/** Run an XMLRPC command. Name should be a query name and params an array of parameters, eg:
-	 * $this->RunXMLRPC("checkAuthentication", array("adam", "qwerty"));
-	 * If successful returns back an array of useful information.
-	 *
-	 * Note that $params["id"] is reserved for query ID, you may set it to something if you wish.
-	 * If you do, the same ID will be passed back with the reply from Anope.
-	 */
-	function RunXMLRPC($name, $params)
-	{
-		$xmlquery = xmlrpc_encode_request($name, $params);
-		$context = stream_context_create(array("http" => array(
-			"method" => "POST",
-			"header" => "Content-Type: text/xml",
-			"content" => $xmlquery)));
+    /**
+     * Run an XMLRPC command. Name should be a query name and params an array of parameters, eg:
+     * $this->raw("checkAuthentication", ["adam", "qwerty"]);
+     * If successful returns back an array of useful information.
+     *
+     * Note that $params["id"] is reserved for query ID, you may set it to something if you wish.
+     * If you do, the same ID will be passed back with the reply from Anope.
+     *
+     * @param $name
+     * @param $params
+     * @return array|null
+     */
+    public function run($name, $params)
+    {
+        $xmlquery = xmlrpc_encode_request($name, $params);
+        $context = stream_context_create(["http" => [
+            "method" => "POST",
+            "header" => "Content-Type: text/xml",
+            "content" => $xmlquery]]);
 
-		$inbuf = file_get_contents($this->Host, false, $context);
-		$response = xmlrpc_decode($inbuf);
+        $inbuf = file_get_contents($this->host, false, $context);
+        $response = xmlrpc_decode($inbuf);
 
-		if (isset($response[0]))
-			return $response[0];
-		return NULL;
-	}
+        if ($response) {
+            return $response;
+        }
 
-	/** Do Command on Service as User, eg:
-	 * $anope->DoCommand("ChanServ", "Adam", "REGISTER #adam");
-	 * Returns an array of information regarding the command execution, if
-	 * If 'online' is set to yes, then the reply to the command was sent to the user on IRC.
-	 * If 'online' is set to no, then the reply to the command is in the array member 'return'
-	 */
-	function DoCommand($Service, $User, $Command)
-	{
-		return $this->RunXMLRPC("command", array($Service, $User, $Command));
-	}
+        return null;
+    }
 
-	/** Check an account/nick name and password to see if they are valid
-	 * Returns the account display name if valid
-	 */
-	function CheckAuthentication($Account, $Pass)
-	{
-		$ret = $this->RunXMLRPC("checkAuthentication", array($Account, $Pass));
+    /**
+     * Do Command on Service as User, eg:
+     * $anope->command("ChanServ", "Adam", "REGISTER #adam");
+     * Returns an array of information regarding the command execution, if
+     * If 'online' is set to yes, then the reply to the command was sent to the user on IRC.
+     * If 'online' is set to no, then the reply to the command is in the array member 'return'
+     *
+     * @param $service
+     * @param $user
+     * @param $command
+     * @return array|null
+     */
+    public function command($service, $user, $command)
+    {
+        return $this->run("command", [$service, $user, $command]);
+    }
 
-		if ($ret && $ret["result"] == "Success")
-			return $ret["account"];
-		return NULL;
-	}
+    /**
+     * Check an account/nick name and password to see if they are valid
+     * Returns the account display name if valid
+     *
+     * @param $account
+     * @param $pass
+     * @return string|null
+     */
+    public function auth($account, $pass)
+    {
+        $ret = $this->run("checkAuthentication", [$account, $pass]);
 
-	/* Returns an array of misc stats regarding Anope
-	 */
-	function DoStats()
-	{
-		return $this->RunXMLRPC("stats", NULL);
-	}
+        if ($ret && $ret["result"] == "Success") {
+            return $ret["account"];
+        }
 
-	/* Look up data for a channel
-	 * Returns an array containing channel information, or an array of size one
-	 * (just containing the name) if the channel does not exist
-	 */
-	function DoChannel($Channel)
-	{
-		return $this->RunXMLRPC("channel", array($Channel));
-	}
+        return null;
+    }
 
-	/* Like DoChannel(), but different.
-	 */
-	function DoUser($User)
-	{
-		return $this->RunXMLRPC("user", array($User));
-	}
+    /**
+     * Returns an array of misc stats regarding Anope
+     *
+     * @return array|null
+     */
+    public function stats()
+    {
+        return $this->run("stats", null);
+    }
+
+    /**
+     * Look up data for a channel
+     * Returns an array containing channel information, or an array of size one
+     * (just containing the name) if the channel does not exist
+     *
+     * @param $channel
+     * @return array|null
+     */
+    public function channel($channel)
+    {
+        return $this->run("channel", [$channel]);
+    }
+
+    /**
+     * Sent a notice to a user.
+     * Returns an array containing channel information, or an array of size one
+     * (just containing the name) if the channel does not exist
+     *
+     * @param $source
+     * @param $target
+     * @param $message
+     * @return array|null
+     */
+    public function notice($source, $target, $message)
+    {
+        return $this->run("notice", [$source, $target, $message]);
+    }
+
+    /**
+     * Like channel(), but different.
+     *
+     * @param $user
+     * @return array|null
+     */
+    public function user($user)
+    {
+        return $this->run("user", [$user]);
+    }
 }
 
-$anopexmlrpc = new AnopeXMLRPC("http://127.0.0.1:8080/xmlrpc");
-
-?>
+$anope = new AnopeXMLRPC("http://127.0.0.1:8080/xmlrpc");

extras

@@ -148,12 +148,7 @@ while (1)
 
 	if ($input eq "q") {
 		if (-e "build/CMakeFiles") {
-			if (-e "cmake-bin") {
-				my $cmake_path = `find cmake-bin -name cmake -print0`;
-				system($cmake_path, "build/.");
-			} else {
-				system("cmake", "build/.");
-			}
+			system("cmake", "build/.");
 			print "\nNow cd build, then run make to build Anope.\n\n";
 		} else {
 			print "\nBuild directory not found. You should run ./Config now.\n\n"

include/CMakeLists.txt

@@ -7,7 +7,7 @@ get_target_property(version_BINARY version LOCATION)
 # Modify version.h from the above executable, with dependencies to version.cpp
 # and all of the source files in the main build
 add_custom_command(OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/version_build
-  COMMAND ${version_BINARY} ${Anope_SOURCE_DIR} ${CMAKE_CURRENT_BINARY_DIR}/version.h
+  COMMAND ${version_BINARY} ${Anope_SOURCE_DIR} ${CMAKE_CURRENT_BINARY_DIR}/version.h ${CMAKE_CURRENT_BINARY_DIR}/build.h
   DEPENDS version ${SRC_SRCS}
 )
 # Add version to list of files for CPack to ignore
@@ -15,6 +15,7 @@ get_filename_component(version_BINARY ${version_BINARY} NAME)
 add_to_cpack_ignored_files("${version_BINARY}$" TRUE)
 if(NOT WIN32)
   add_to_cpack_ignored_files("version.h$" TRUE)
+  add_to_cpack_ignored_files("build.h$" TRUE)
 endif(NOT WIN32)
 
 set(PCH_SOURCES_GCH "")

include/access.h

@@ -1,13 +1,12 @@
 /*
  *
- * (C) 2003-2014 Anope Team
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
  *
  * Based on the original code of Epona by Lara.
  * Based on the original code of Services by Andy Church.
- *
  */
 
 #ifndef ACCESS_H
@@ -74,21 +73,17 @@ class CoreExport AccessProvider : public Service
 /* Represents one entry of an access list on a channel. */
 class CoreExport ChanAccess : public Serializable
 {
+	Anope::string mask;
+	/* account this access entry is for, if any */
+	Serialize::Reference<NickCore> nc;
+
  public:
-	typedef std::multimap<const ChanAccess *, const ChanAccess *> Set;
- 	/* shows the 'path' taken to determine if an access entry matches a user
-	 * .first are access entries checked
-	 * .second are access entries which match
-	 */
-	typedef std::pair<Set, Set> Path;
+	typedef std::vector<ChanAccess *> Path;
 
  	/* The provider that created this access entry */
 	AccessProvider *provider;
 	/* Channel this access entry is on */
 	Serialize::Reference<ChannelInfo> ci;
-	/* account this access entry is for, if any */
-	Serialize::Reference<NickCore> nc;
-	Anope::string mask;
 	Anope::string creator;
 	time_t last_seen;
 	time_t created;
@@ -96,15 +91,21 @@ class CoreExport ChanAccess : public Serializable
 	ChanAccess(AccessProvider *p);
 	virtual ~ChanAccess();
 
+	void SetMask(const Anope::string &mask, ChannelInfo *ci);
+	const Anope::string &Mask() const;
+	NickCore *GetAccount() const;
+
 	void Serialize(Serialize::Data &data) const anope_override;
 	static Serializable* Unserialize(Serializable *obj, Serialize::Data &);
 
+	static const unsigned int MAX_DEPTH = 4;
+
 	/** Check if this access entry matches the given user or account
 	 * @param u The user
 	 * @param nc The account
-	 * @param p The path to the access object which matches will be put here
+	 * @param next Next channel to check if any
 	 */
-	virtual bool Matches(const User *u, const NickCore *nc, Path &p) const;
+	virtual bool Matches(const User *u, const NickCore *nc, ChannelInfo* &next) const;
 
 	/** Check if this access entry has the given privilege.
 	 * @param name The privilege name
@@ -132,13 +133,13 @@ class CoreExport ChanAccess : public Serializable
 /* A group of access entries. This is used commonly, for example with ChannelInfo::AccessFor,
  * to show what access a user has on a channel because users can match multiple access entries.
  */
-class CoreExport AccessGroup : public std::vector<ChanAccess *>
+class CoreExport AccessGroup
 {
  public:
+	/* access entries + paths */
+	std::vector<ChanAccess::Path> paths;
 	/* Channel these access entries are on */
  	const ChannelInfo *ci;
-	/* Path from these entries to other entries that they depend on */
-	ChanAccess::Path path;
 	/* Account these entries affect, if any */
 	const NickCore *nc;
 	/* super_admin always gets all privs. founder is a special case where ci->founder == nc */
@@ -166,7 +167,8 @@ class CoreExport AccessGroup : public std::vector<ChanAccess *>
 	bool operator<(const AccessGroup &other) const;
 	bool operator>=(const AccessGroup &other) const;
 	bool operator<=(const AccessGroup &other) const;
+
+	inline bool empty() const { return paths.empty(); }
 };
 
 #endif
-

include/account.h

@@ -1,13 +1,12 @@
 /*
  *
- * (C) 2003-2014 Anope Team
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
  *
  * Based on the original code of Epona by Lara.
  * Based on the original code of Services by Andy Church.
- * 
  */
 
 #ifndef ACCOUNT_H
@@ -26,7 +25,7 @@ extern CoreExport Serialize::Checker<nickalias_map> NickAliasList;
 extern CoreExport Serialize::Checker<nickcore_map> NickCoreList;
 
 /* A registered nickname.
- * It matters that Base is here before Extensible (it is inherited by Serializable) 
+ * It matters that Base is here before Extensible (it is inherited by Serializable)
  */
 class CoreExport NickAlias : public Serializable, public Extensible
 {
@@ -215,7 +214,7 @@ class CoreExport NickCore : public Serializable, public Extensible
 	 * @return The account, if it exists
 	 */
 	static NickCore* Find(const Anope::string &nick);
-	
+
 	void AddChannelReference(ChannelInfo *ci);
 	void RemoveChannelReference(ChannelInfo *ci);
 	void GetChannelReferences(std::deque<ChannelInfo *> &queue);
@@ -235,7 +234,7 @@ class CoreExport IdentifyRequest
 	std::set<Module *> holds;
 	bool dispatched;
 	bool success;
-	
+
 	static std::set<IdentifyRequest *> Requests;
 
  protected:
@@ -247,6 +246,7 @@ class CoreExport IdentifyRequest
 	virtual void OnSuccess() = 0;
 	virtual void OnFail() = 0;
 
+	Module *GetOwner() const { return owner; }
 	const Anope::string &GetAccount() const { return account; }
 	const Anope::string &GetPassword() const { return password; }
 

include/anope.h

@@ -1,13 +1,12 @@
 /*
  *
- * (C) 2003-2014 Anope Team
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
  *
  * Based on the original code of Epona by Lara.
  * Based on the original code of Services by Andy Church.
- *
  */
 
 #ifndef ANOPE_H
@@ -337,7 +336,9 @@ namespace Anope
 	template<typename T> class multimap : public std::multimap<string, T, ci::less> { };
 	template<typename T> class hash_map : public TR1NS::unordered_map<string, T, hash_ci, compare> { };
 
+#ifndef REPRODUCIBLE_BUILD
 	static const char *const compiled = __TIME__ " " __DATE__;
+#endif
 
 	/** The time Anope started.
 	 */
@@ -442,13 +443,13 @@ namespace Anope
 	 */
 	extern CoreExport void Unhex(const string &src, string &dest);
 	extern CoreExport void Unhex(const string &src, char *dest, size_t sz);
-	
+
 	/** Base 64 encode a string
 	 * @param src The string to encode
 	 * @param target Where the encoded string is placed
 	 */
 	extern CoreExport void B64Encode(const string &src, string &target);
-	
+
 	/** Base 64 decode a string
 	 * @param src The base64 encoded string
 	 * @param target The plain text result
@@ -543,7 +544,7 @@ namespace Anope
 	extern CoreExport Anope::string Random(size_t len);
 }
 
-/** sepstream allows for splitting token seperated lists.
+/** sepstream allows for splitting token separated lists.
  * Each successive call to sepstream::GetToken() returns
  * the next token, until none remain, at which point the method returns
  * an empty string.
@@ -615,7 +616,7 @@ class CoreExport sepstream
 	bool StreamEnd();
 };
 
-/** A derived form of sepstream, which seperates on commas
+/** A derived form of sepstream, which separates on commas
  */
 class commasepstream : public sepstream
 {
@@ -625,7 +626,7 @@ class commasepstream : public sepstream
 	commasepstream(const Anope::string &source, bool allowempty = false) : sepstream(source, ',', allowempty) { }
 };
 
-/** A derived form of sepstream, which seperates on spaces
+/** A derived form of sepstream, which separates on spaces
  */
 class spacesepstream : public sepstream
 {

include/base.h

@@ -1,10 +1,9 @@
 /*
  *
- * Copyright (C) 2008-2011 Adam <Adam@anope.org>
- * Copyright (C) 2008-2014 Anope Team <team@anope.org>
+ * (C) 2008-2011 Adam <Adam@anope.org>
+ * (C) 2008-2017 Anope Team <team@anope.org>
  *
  * Please read COPYING and README for further details.
- *
  */
 
 #ifndef BASE_H
@@ -142,4 +141,3 @@ class Reference : public ReferenceBase
 };
 
 #endif // BASE_H
-

include/bots.h

@@ -1,10 +1,9 @@
 /*
  *
- * Copyright (C) 2008-2011 Robin Burchell <w00t@inspircd.org>
- * Copyright (C) 2008-2014 Anope Team <team@anope.org>
+ * (C) 2008-2011 Robin Burchell <w00t@inspircd.org>
+ * (C) 2008-2017 Anope Team <team@anope.org>
  *
  * Please read COPYING and README for further details.
- *
  */
 
 #ifndef BOTS_H

include/channels.h

@@ -1,10 +1,9 @@
 /* Channel support
  *
- * (C) 2008-2014 Anope Team
+ * (C) 2008-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
- *
  */
 
 #ifndef CHANNELS_H
@@ -32,6 +31,8 @@ struct ChanUserContainer : public Extensible
 
 class CoreExport Channel : public Base, public Extensible
 {
+	static std::vector<Channel *> deleting;
+
  public:
 	typedef std::multimap<Anope::string, Anope::string> ModeList;
  private:
@@ -59,7 +60,7 @@ class CoreExport Channel : public Base, public Extensible
 	Anope::string topic;
 	/* Who set the topic */
 	Anope::string topic_setter;
-	/* The timestamp associated with the topic. Not necessarually anywhere close to Anope::CurTime.
+	/* The timestamp associated with the topic. Not necessarily anywhere close to Anope::CurTime.
 	 * This is the time the topic was *originally set*. When we restore the topic we want to change the TS back
 	 * to this, but we can only do this on certain IRCds.
 	 */
@@ -242,9 +243,9 @@ class CoreExport Channel : public Base, public Extensible
 
 	/** Get a list of modes on a channel
 	 * @param name A mode name to get the list of
-	 * @return a pair of iterators for the beginning and end of the list
+	 * @return a vector of the list mode entries
 	 */
-	std::pair<ModeList::iterator, ModeList::iterator> GetModeList(const Anope::string &name);
+	std::vector<Anope::string> GetModeList(const Anope::string &name);
 
 	/** Get a string of the modes set on this channel
 	 * @param complete Include mode parameters
@@ -258,7 +259,7 @@ class CoreExport Channel : public Base, public Extensible
 	 * @param newtopic The new topic
 	 * @param ts The time the new topic is being set
 	 */
-	void ChangeTopicInternal(const Anope::string &user, const Anope::string &newtopic, time_t ts = Anope::CurTime);
+	void ChangeTopicInternal(User *u, const Anope::string &user, const Anope::string &newtopic, time_t ts = Anope::CurTime);
 
 	/** Update the topic of the channel, and reset it if topiclock etc says to
 	 * @param user The user setting the topic
@@ -276,10 +277,11 @@ class CoreExport Channel : public Base, public Extensible
 
 	/** Unbans a user from this channel.
 	 * @param u The user to unban
+	 * @param mode The mode to unban
 	 * @param full Whether or not to match using the user's real host and IP
 	 * @return whether or not a ban was removed
 	 */
-	bool Unban(User *u, bool full = false);
+	bool Unban(User *u, const Anope::string &mode, bool full = false);
 
 	/** Check whether a user is permitted to be on this channel
 	 * @param u The user
@@ -299,6 +301,10 @@ class CoreExport Channel : public Base, public Extensible
 	 * @param ts The time the channel was created
 	 */
 	static Channel *FindOrCreate(const Anope::string &name, bool &created, time_t ts = Anope::CurTime);
+
+	void QueueForDeletion();
+
+	static void DeleteChannels();
 };
 
 #endif // CHANNELS_H

include/commands.h

@@ -1,6 +1,6 @@
 /* Declarations for command data.
  *
- * (C) 2003-2014 Anope Team
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
@@ -59,6 +59,8 @@ class CoreExport CommandSource
  public:
 	/* The account executing the command */
 	Reference<NickCore> nc;
+	/* for web clients */
+	Anope::string ip;
 	/* Where the reply should go */
 	CommandReply *reply;
 	/* Channel the command was executed on (fantasy) */
@@ -170,6 +172,8 @@ class CoreExport Command : public Service
 	 */
 	static void Run(CommandSource &source, const Anope::string &message);
 
+	void Run(CommandSource &source, const Anope::string &, const CommandInfo &, std::vector<Anope::string> &params);
+
 	/** Looks up a command name from the service name.
 	 * Note that if the same command exists multiple places this will return the first one encountered
 	 * @param command_service The command service to lookup, eg, nickserv/register

include/config.h

@@ -1,13 +1,12 @@
 /*
  *
- * (C) 2003-2014 Anope Team
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
  *
  * Based on the original code of Epona by Lara.
  * Based on the original code of Services by Andy Church.
- *
  */
 
 #ifndef CONFIG_H
@@ -51,14 +50,13 @@ namespace Configuration
 		template<typename T> T Get(const Anope::string &tag, const Anope::string &def) const
 		{
 			const Anope::string &value = this->Get<const Anope::string>(tag, def);
-			try
-			{
-				return convertTo<T>(value);
-			}
-			catch (const ConvertException &)
-			{
-				return T();
-			}
+			if (!value.empty())
+				try
+				{
+					return convertTo<T>(value);
+				}
+				catch (const ConvertException &) { }
+			return T();
 		}
 
 		bool Set(const Anope::string &tag, const Anope::string &value);
@@ -80,6 +78,7 @@ namespace Configuration
 		File(const Anope::string &, bool);
 		~File();
 		const Anope::string &GetName() const;
+		Anope::string GetPath() const;
 
 		bool IsOpen() const;
 		bool Open();
@@ -104,6 +103,8 @@ namespace Configuration
 		time_t TimeoutCheck;
 		/* options:usestrictprivmsg */
 		bool UseStrictPrivmsg;
+		/* networkinfo:nickchars */
+		Anope::string NickChars;
 
 		/* either "/msg " or "/" */
 		Anope::string StrictPrivmsg;
@@ -132,11 +133,14 @@ namespace Configuration
 		~Conf();
 
 		void LoadConf(File &file);
+		void Post(Conf *old);
 
 		Block *GetModule(Module *);
 		Block *GetModule(const Anope::string &name);
 
 		BotInfo *GetClient(const Anope::string &name);
+
+		Block *GetCommand(CommandSource &);
 	};
 
 	struct Uplink

include/defs.h

@@ -1,16 +1,14 @@
 /*
  *
- * (C) 2003-2014 Anope Team
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
  *
  * Based on the original code of Epona by Lara.
  * Based on the original code of Services by Andy Church.
- *
  */
 
-
 class AccessGroup;
 class AutoKick;
 class BotInfo;
@@ -53,4 +51,3 @@ struct MemoInfo;
 struct ModeLock;
 struct Oper;
 namespace SASL { struct Message; }
-

include/extensible.h

@@ -1,10 +1,9 @@
 /*
  *
- * (C) 2003-2014 Anope Team
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
- *
  */
 
 #ifndef EXTENSIBLE_H
@@ -40,6 +39,8 @@ class CoreExport Extensible
 
 	virtual ~Extensible();
 
+	void UnsetExtensibles();
+
 	template<typename T> T* GetExt(const Anope::string &name) const;
 	bool HasExt(const Anope::string &name) const;
 
@@ -176,6 +177,8 @@ class SerializableExtensibleItem : public PrimitiveExtensibleItem<T>
 		T t;
 		if (data[this->name] >> t)
 			this->Set(e, t);
+		else
+			this->Unset(e);
 	}
 };
 
@@ -196,6 +199,8 @@ class SerializableExtensibleItem<bool> : public PrimitiveExtensibleItem<bool>
 		data[this->name] >> b;
 		if (b)
 			this->Set(e);
+		else
+			this->Unset(e);
 	}
 };
 

include/hashcomp.h

@@ -1,10 +1,9 @@
 /*
  *
- * Copyright (C) 2002-2011 InspIRCd Development Team
- * Copyright (C) 2009-2014 Anope Team <team@anope.org>
+ * (C) 2002-2011 InspIRCd Development Team
+ * (C) 2009-2017 Anope Team <team@anope.org>
  *
  * Please read COPYING and README for further details.
- *
  */
 
 #ifndef HASHCOMP_H
@@ -123,7 +122,7 @@ namespace ci
 		 * @param s1 String to find in
 		 * @param n Position to search up to
 		 * @param c Character to search for
-		 * @return Pointer to the first occurance of c in s1
+		 * @return Pointer to the first occurrence of c in s1
 		 */
 		static const char *find(const char *s1, int n, char c);
 	};

include/language.h

@@ -1,10 +1,9 @@
 /*
  *
- * (C) 2008-2014 Anope Team
+ * (C) 2008-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
- *
  */
 
 #include "anope.h"
@@ -24,7 +23,7 @@ namespace Language
 	 * and we detect a language file exists for at least one of the supported
 	 * languages for the module, then we add the module's domain (its name)
 	 * here.
-	 * 
+	 *
 	 * When strings are translated they are checked against all domains.
 	 */
 	extern std::vector<Anope::string> Domains;
@@ -74,7 +73,7 @@ namespace Language
 #define MORE_OBSCURE_PASSWORD		_("Please try again with a more obscure password. Passwords should be at least\n" \
 						"five characters long, should not be something easily guessed\n" \
 						"(e.g. your real name or your nick), and cannot contain the space or tab characters.")
-#define PASSWORD_TOO_LONG		_("Your password is too long. Please try again with a shorter password.")
+#define PASSWORD_TOO_LONG		_("Your password is too long. It must not exceed %u characters.")
 #define NICK_NOT_REGISTERED		_("Your nick isn't registered.")
 #define NICK_X_NOT_REGISTERED		_("Nick \002%s\002 isn't registered.")
 #define NICK_X_NOT_IN_USE		_("Nick \002%s\002 isn't currently in use.")
@@ -107,7 +106,7 @@ namespace Language
 #define CHAN_SETTING_UNSET		_("%s for %s unset.")
 #define CHAN_ACCESS_LEVEL_RANGE		_("Access level must be between %d and %d inclusive.")
 #define CHAN_INFO_HEADER		_("Information for channel \002%s\002:")
-#define CHAN_EXCEPTED			_("\002%s\002 matches an except on %s and cannot be banned until the except have been removed.")
+#define CHAN_EXCEPTED			_("\002%s\002 matches an except on %s and cannot be banned until the except has been removed.")
 #define MEMO_NEW_X_MEMO_ARRIVED		_("There is a new memo on channel %s.\n" \
 						"Type \002%s%s READ %s %d\002 to read it.")
 #define MEMO_NEW_MEMO_ARRIVED		_("You have a new memo from %s.\n" \
@@ -126,4 +125,3 @@ namespace Language
 #define HOST_SET_IDENTTOOLONG		_("Error! The vHost ident is too long, please use an ident shorter than %d characters.")
 #define HOST_NOT_ASSIGNED		_("Please contact an Operator to get a vHost assigned to this nick.")
 #define HOST_NO_VIDENT			_("Your IRCd does not support vIdent's, if this is incorrect, please report this as a possible bug")
-

include/lists.h

@@ -1,13 +1,12 @@
 /*
  *
- * (C) 2003-2014 Anope Team
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
  *
  * Based on the original code of Epona by Lara.
  * Based on the original code of Services by Andy Church.
- *
  */
 
 #ifndef LISTS_H
@@ -52,7 +51,7 @@ class CoreExport NumberList
 	virtual void HandleNumber(unsigned number);
 
 	/** Called when there is an error with the numbered list
-	 * Return false to immediatly stop processing the list and return
+	 * Return false to immediately stop processing the list and return
 	 * This is all done before we start calling HandleNumber, so no numbers will have been processed yet
 	 * @param list The list
 	 * @return false to stop processing
@@ -93,4 +92,3 @@ class CoreExport InfoFormatter
 };
 
 #endif // LISTS_H
-

include/logger.h

@@ -1,13 +1,12 @@
 /*
  *
- * (C) 2003-2014 Anope Team
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
  *
  * Based on the original code of Epona by Lara.
  * Based on the original code of Services by Andy Church.
- *
  */
 
 #ifndef LOGGER_H
@@ -96,6 +95,11 @@ class CoreExport Log
 
 	~Log();
 
+ private:
+	Anope::string FormatSource() const;
+	Anope::string FormatCommand() const;
+
+ public:
 	Anope::string BuildPrefix() const;
 
 	template<typename T> Log &operator<<(T val)
@@ -138,4 +142,3 @@ class CoreExport LogInfo
 };
 
 #endif // LOGGER_H
-

include/mail.h

@@ -1,14 +1,12 @@
 /*
  *
- * (C) 2003-2014 Anope Team
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
  *
  * Based on the original code of Epona by Lara.
  * Based on the original code of Services by Andy Church.
- *
- *
  */
 
 #ifndef MAIL_H

include/memo.h

@@ -1,13 +1,12 @@
 /*
  *
- * (C) 2003-2014 Anope Team
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
  *
  * Based on the original code of Epona by Lara.
  * Based on the original code of Services by Andy Church.
- *
  */
 
 #ifndef MEMO_H
@@ -19,6 +18,7 @@
 class CoreExport Memo : public Serializable
 {
  public:
+	MemoInfo *mi;
  	bool unread;
 	bool receipt;
  	Memo();

include/messages.h

@@ -1,13 +1,12 @@
 /*
  *
- * (C) 2003-2014 Anope Team
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
  *
  * Based on the original code of Epona by Lara.
  * Based on the original code of Services by Andy Church.
- *
  */
 
 #include "protocol.h"
@@ -23,21 +22,21 @@ namespace Message
 	struct CoreExport Away : IRCDMessage
 	{
 		Away(Module *creator, const Anope::string &mname = "AWAY") : IRCDMessage(creator, mname, 0) { SetFlag(IRCDMESSAGE_REQUIRE_USER); SetFlag(IRCDMESSAGE_SOFT_LIMIT); }
-	
+
 		void Run(MessageSource &source, const std::vector<Anope::string> &params) anope_override;
 	};
-	
+
 	struct CoreExport Capab : IRCDMessage
 	{
 		Capab(Module *creator, const Anope::string &mname = "CAPAB") : IRCDMessage(creator, mname, 1) { SetFlag(IRCDMESSAGE_SOFT_LIMIT); }
 
 		void Run(MessageSource &source, const std::vector<Anope::string> &params) anope_override;
 	};
-	
+
 	struct CoreExport Error : IRCDMessage
 	{
 		Error(Module *creator, const Anope::string &mname = "ERROR") : IRCDMessage(creator, mname, 1) { }
-	
+
 		void Run(MessageSource &source, const std::vector<Anope::string> &params) anope_override;
 	};
 
@@ -47,15 +46,15 @@ namespace Message
 
 		void Run(MessageSource &source, const std::vector<Anope::string> &params) anope_override;
 	};
-	
+
 	struct CoreExport Join : IRCDMessage
 	{
 		Join(Module *creator, const Anope::string &mname = "JOIN") : IRCDMessage(creator, mname, 1) { SetFlag(IRCDMESSAGE_REQUIRE_USER); SetFlag(IRCDMESSAGE_SOFT_LIMIT); }
-	
+
 		void Run(MessageSource &source, const std::vector<Anope::string> &params) anope_override;
-	
+
 		typedef std::pair<ChannelStatus, User *> SJoinUser;
-	
+
 		/** Handle a SJOIN.
 		 * @param source The source of the SJOIN
 		 * @param chan The channel the users are joining to
@@ -65,35 +64,35 @@ namespace Message
 		 */
 		static void SJoin(MessageSource &source, const Anope::string &chan, time_t ts, const Anope::string &modes, const std::list<SJoinUser> &users);
 	};
-	
+
 	struct CoreExport Kick : IRCDMessage
 	{
 		Kick(Module *creator, const Anope::string &mname = "KICK") : IRCDMessage(creator, mname, 2) { SetFlag(IRCDMESSAGE_SOFT_LIMIT); }
-	
+
 		void Run(MessageSource &source, const std::vector<Anope::string> &params) anope_override;
 	};
-	
+
 	struct CoreExport Kill : IRCDMessage
 	{
 		Kill(Module *creator, const Anope::string &mname = "KILL") : IRCDMessage(creator, mname, 2) { }
-	
+
 		void Run(MessageSource &source, const std::vector<Anope::string> &params) anope_override;
 	};
 
 	struct CoreExport Mode : IRCDMessage
 	{
-		Mode(Module *creator, const Anope::string &mname = "MODE") : IRCDMessage(creator, mname, 2) { }
+		Mode(Module *creator, const Anope::string &mname = "MODE") : IRCDMessage(creator, mname, 2) { SetFlag(IRCDMESSAGE_SOFT_LIMIT); }
 
 		void Run(MessageSource &source, const std::vector<Anope::string> &params) anope_override;
 	};
-	
+
 	struct CoreExport MOTD : IRCDMessage
 	{
 		MOTD(Module *creator, const Anope::string &mname = "MOTD") : IRCDMessage(creator, mname, 1) { }
-	
+
 		void Run(MessageSource &source, const std::vector<Anope::string> &params) anope_override;
 	};
-	
+
 	struct CoreExport Notice : IRCDMessage
 	{
 		Notice(Module *creator, const Anope::string &mname = "NOTICE") : IRCDMessage(creator, mname, 2) { SetFlag(IRCDMESSAGE_REQUIRE_USER); }
@@ -104,72 +103,71 @@ namespace Message
 	struct CoreExport Part : IRCDMessage
 	{
 		Part(Module *creator, const Anope::string &mname = "PART") : IRCDMessage(creator, mname, 1) { SetFlag(IRCDMESSAGE_REQUIRE_USER); SetFlag(IRCDMESSAGE_SOFT_LIMIT); }
-	
+
 		void Run(MessageSource &source, const std::vector<Anope::string> &params) anope_override;
 	};
-	
+
 	struct CoreExport Ping : IRCDMessage
 	{
 		Ping(Module *creator, const Anope::string &mname = "PING") : IRCDMessage(creator, mname, 1) { SetFlag(IRCDMESSAGE_SOFT_LIMIT); }
-	
+
 		void Run(MessageSource &source, const std::vector<Anope::string> &params) anope_override;
 	};
-	
+
 	struct CoreExport Privmsg : IRCDMessage
 	{
 		Privmsg(Module *creator, const Anope::string &mname = "PRIVMSG") : IRCDMessage(creator, mname, 2) { SetFlag(IRCDMESSAGE_REQUIRE_USER); }
-	
+
 		void Run(MessageSource &source, const std::vector<Anope::string> &params) anope_override;
 	};
-	
+
 	struct CoreExport Quit : IRCDMessage
 	{
 		Quit(Module *creator, const Anope::string &mname = "QUIT") : IRCDMessage(creator, mname, 1) { SetFlag(IRCDMESSAGE_REQUIRE_USER); }
-	
+
 		void Run(MessageSource &source, const std::vector<Anope::string> &params) anope_override;
 	};
-	
+
 	struct CoreExport SQuit : IRCDMessage
 	{
-		SQuit(Module *creator, const Anope::string &mname = "SQUIT") : IRCDMessage(creator, mname, 2) { SetFlag(IRCDMESSAGE_REQUIRE_SERVER); }
-	
+		SQuit(Module *creator, const Anope::string &mname = "SQUIT") : IRCDMessage(creator, mname, 2) { }
+
 		void Run(MessageSource &source, const std::vector<Anope::string> &params) anope_override;
 	};
-	
+
 	struct CoreExport Stats : IRCDMessage
 	{
 		Stats(Module *creator, const Anope::string &mname = "STATS") : IRCDMessage(creator, mname, 1) { SetFlag(IRCDMESSAGE_REQUIRE_USER); SetFlag(IRCDMESSAGE_SOFT_LIMIT); }
-	
+
 		void Run(MessageSource &source, const std::vector<Anope::string> &params) anope_override;
 	};
-	
+
 	struct CoreExport Time : IRCDMessage
 	{
 		Time(Module *creator, const Anope::string &mname = "TIME") : IRCDMessage(creator, mname, 0) { SetFlag(IRCDMESSAGE_SOFT_LIMIT); }
-	
+
 		void Run(MessageSource &source, const std::vector<Anope::string> &params) anope_override;
 	};
-	
+
 	struct CoreExport Topic : IRCDMessage
 	{
 		Topic(Module *creator, const Anope::string &mname = "TOPIC") : IRCDMessage(creator, mname, 2) { SetFlag(IRCDMESSAGE_REQUIRE_USER); }
-	
+
 		void Run(MessageSource &source, const std::vector<Anope::string> &params) anope_override;
 	};
-	
+
 	struct CoreExport Version : IRCDMessage
 	{
 		Version(Module *creator, const Anope::string &mname = "VERSION") : IRCDMessage(creator, mname, 0) { SetFlag(IRCDMESSAGE_SOFT_LIMIT); }
-	
+
 		void Run(MessageSource &source, const std::vector<Anope::string> &params) anope_override;
 	};
-	
+
 	struct CoreExport Whois : IRCDMessage
 	{
  		Whois(Module *creator, const Anope::string &mname = "WHOIS") : IRCDMessage(creator, mname, 1) { SetFlag(IRCDMESSAGE_SOFT_LIMIT); }
-	
+
 		void Run(MessageSource &source, const std::vector<Anope::string> &params) anope_override;
 	};
 
 } // namespace Message
-	

include/modes.h

@@ -1,7 +1,7 @@
 /* Mode support
  *
- * Copyright (C) 2008-2011 Adam <Adam@anope.org>
- * Copyright (C) 2008-2014 Anope Team <team@anope.org>
+ * (C) 2008-2011 Adam <Adam@anope.org>
+ * (C) 2008-2017 Anope Team <team@anope.org>
  *
  * Please read COPYING and README for further details.
  */
@@ -88,7 +88,7 @@ class CoreExport UserModeParam : public UserMode
 	 * @param value The param
 	 * @return true or false
 	 */
-	virtual bool IsValid(const Anope::string &value) const { return true; }
+	virtual bool IsValid(Anope::string &value) const { return true; }
 };
 
 /** This class is a channel mode, all channel modes use this/inherit from this
@@ -96,6 +96,9 @@ class CoreExport UserModeParam : public UserMode
 class CoreExport ChannelMode : public Mode
 {
  public:
+	/* channel modes that can posssibly unwrap this mode */
+	std::vector<ChannelMode *> listeners;
+
 	/** constructor
 	 * @param name The mode name
 	 * @param mc The mode char
@@ -103,6 +106,20 @@ class CoreExport ChannelMode : public Mode
 	ChannelMode(const Anope::string &name, char mc);
 
 	bool CanSet(User *u) const anope_override;
+
+	virtual void Check() { }
+
+	/** 'wrap' this channel mode and param to the underlying mode and param
+	 */
+	virtual ChannelMode *Wrap(Anope::string &param);
+
+	/** 'unwrap' this mode to our internal representation
+	 */
+	ChannelMode *Unwrap(Anope::string &param);
+
+	/** called when a mode is being unwrapped, and is asking us if we can unwrap it
+	 */
+	virtual ChannelMode *Unwrap(ChannelMode *, Anope::string &param);
 };
 
 /** This is a mode for lists, eg b/e/I. These modes should inherit from this
@@ -120,7 +137,7 @@ class CoreExport ChannelModeList : public ChannelMode
 	 * @param mask The mask
 	 * @return true for yes, false for no
 	 */
-	virtual bool IsValid(const Anope::string &mask) const { return true; }
+	virtual bool IsValid(Anope::string &mask) const;
 
 	/** Checks if mask affects user
 	 * Should only be used for extbans or other weird ircd-specific things.
@@ -162,7 +179,7 @@ class CoreExport ChannelModeParam : public ChannelMode
 	 * @param value The param
 	 * @return true for yes, false for no
 	 */
-	virtual bool IsValid(const Anope::string &value) const { return true; }
+	virtual bool IsValid(Anope::string &value) const { return true; }
 };
 
 /** This is a mode that is a channel status, eg +v/h/o/a/q.
@@ -180,12 +197,33 @@ class CoreExport ChannelModeStatus : public ChannelMode
 	/** constructor
 	 * @param name The mode name
 	 * @param mc The mode char
-	 * @param msymbol The symbol for the mode, eg @ % 
+	 * @param msymbol The symbol for the mode, eg @ %
 	 * @param mlevel A level for the mode, which is usually determined by the PREFIX capab
 	 */
 	ChannelModeStatus(const Anope::string &name, char mc, char msymbol, short mlevel);
 };
 
+/** A virtual mode. This mode doesn't natively exist on the IRCd (like extbans),
+ * but we still have a representation for it.
+ */
+template<typename T>
+class CoreExport ChannelModeVirtual : public T
+{
+	Anope::string base;
+	ChannelMode *basech;
+
+ public:
+	ChannelModeVirtual(const Anope::string &mname, const Anope::string &basename);
+
+	~ChannelModeVirtual();
+
+	void Check() anope_override;
+
+	ChannelMode *Wrap(Anope::string &param) anope_override;
+
+	ChannelMode *Unwrap(ChannelMode *cm, Anope::string &param) = 0;
+};
+
 /* The status a user has on a channel (+v, +h, +o) etc */
 class CoreExport ChannelStatus
 {
@@ -225,7 +263,7 @@ class CoreExport ChannelModeKey : public ChannelModeParam
  public:
 	ChannelModeKey(char mc) : ChannelModeParam("KEY", mc) { }
 
-	bool IsValid(const Anope::string &value) const anope_override;
+	bool IsValid(Anope::string &value) const anope_override;
 };
 
 /** This class is used for oper only channel modes
@@ -257,13 +295,6 @@ class CoreExport ChannelModeNoone : public ChannelMode
  */
 class CoreExport ModeManager
 {
- protected:
-	/* Array of all modes Anope knows about. Modes are in this array at position
-	 * modechar. Additionally, status modes are in this array (again) at statuschar.
-	 */
-	static std::vector<ChannelMode *> ChannelModes;
-	static std::vector<UserMode *> UserModes;
-
  public:
 
 	/* Number of generic channel and user modes we are tracking */
@@ -364,6 +395,7 @@ class CoreExport Entry
 	Anope::string mask;
  public:
 	unsigned short cidr_len;
+	int family;
 	Anope::string nick, user, host, real;
 
 	/** Constructor
@@ -377,6 +409,8 @@ class CoreExport Entry
 	 */
 	const Anope::string GetMask() const;
 
+	const Anope::string GetNUHMask() const;
+
 	/** Check if this entry matches a user
 	 * @param u The user
 	 * @param full True to match against a users real host and IP

include/module.h

@@ -1,6 +1,6 @@
 /*
  *
- * (C) 2003-2014 Anope Team
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

include/modules.h

@@ -1,13 +1,12 @@
 /* Modular support
  *
- * (C) 2003-2014 Anope Team
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
  *
  * Based on the original code of Epona by Lara.
  * Based on the original code of Services by Andy Church.
- *
  */
 
 #include "serialize.h"
@@ -20,6 +19,7 @@
 #include "timers.h"
 #include "logger.h"
 #include "extensible.h"
+#include "version.h"
 
 /** This definition is used as shorthand for the various classes
  * and functions needed to make a module loadable by the OS.
@@ -40,6 +40,14 @@
 	extern "C" void AnopeFini(x *m) \
 	{ \
 		delete m; \
+	} \
+	extern "C" DllExport ModuleVersionC AnopeVersion() \
+	{ \
+		ModuleVersionC ver; \
+		ver.version_major = VERSION_MAJOR; \
+		ver.version_minor = VERSION_MINOR; \
+		ver.version_patch = VERSION_PATCH; \
+		return ver; \
 	}
 #else
 # define MODULE_INIT(x) \
@@ -50,13 +58,21 @@
 	extern "C" DllExport void AnopeFini(x *m) \
 	{ \
 		delete m; \
+	} \
+	extern "C" DllExport ModuleVersionC AnopeVersion() \
+	{ \
+		ModuleVersionC ver; \
+		ver.version_major = VERSION_MAJOR; \
+		ver.version_minor = VERSION_MINOR; \
+		ver.version_patch = VERSION_PATCH; \
+		return ver; \
 	}
 #endif
 
 /**
  * This #define allows us to call a method in all
  * loaded modules in a readable simple way, e.g.:
- * 
+ *
  * FOREACH_MOD(OnUserConnect, (user, exempt));
  */
 #define FOREACH_MOD(ename, args) \
@@ -88,7 +104,7 @@ else \
  * This define is similar to the one above but returns a result.
  * The first module to return a result other than EVENT_CONTINUE is the value to be accepted,
  * and any modules after are ignored. This is used like:
- * 
+ *
  * EventReturn MOD_RESULT;
  * FOREACH_RESULT(OnUserConnect, MOD_RESULT, (user, exempt));
  */
@@ -173,6 +189,11 @@ enum
 };
 typedef unsigned short ModType;
 
+struct ModuleVersionC
+{
+	int version_major, version_minor, version_patch;
+};
+
 /** Returned by Module::GetVersion, used to see what version of Anope
  * a module is compiled against.
  */
@@ -184,12 +205,7 @@ class ModuleVersion
 	int version_patch;
 
  public:
-	/** Constructor
-	 * @param major The major version number
-	 * @param minor The minor version number
-	 * @param patch The patch version number
-	 */
-	ModuleVersion(int major, int minor, int patch);
+	ModuleVersion(const ModuleVersionC &);
 
 	/** Get the major version of Anope this was built against
 	 * @return The major version
@@ -279,16 +295,17 @@ class CoreExport Module : public Extensible
 	 */
 	void SetAuthor(const Anope::string &author);
 
-	/** Get the version of Anope this module was
-	 * compiled against
-	 * @return The version
-	 */
-	ModuleVersion GetVersion() const;
+	virtual void Prioritize();
 
 	/* Everything below here are events. Modules must ModuleManager::Attach to these events
 	 * before they will be called.
 	 */
 
+	/** Called on startup after database load, but before
+	 * connecting to the uplink.
+	 */
+	virtual void OnPostInit() { throw NotImplementedException(); }
+
 	/** Called before a user has been kicked from a channel.
 	 * @param source The kicker
 	 * @param cu The user, channel, and status of the user being kicked
@@ -472,11 +489,12 @@ class CoreExport Module : public Extensible
 	virtual void OnJoinChannel(User *u, Channel *c) { throw NotImplementedException(); }
 
 	/** Called when a new topic is set
+	 * @param source The user changing the topic, if any
 	 * @param c The channel
-	 * @param setter The user who set the new topic
+	 * @param setter The user who set the new topic, if there is no source
 	 * @param topic The new topic
 	 */
-	virtual void OnTopicUpdated(Channel *c, const Anope::string &user, const Anope::string &topic) { throw NotImplementedException(); }
+	virtual void OnTopicUpdated(User *source, Channel *c, const Anope::string &user, const Anope::string &topic) { throw NotImplementedException(); }
 
 	/** Called before a channel expires
 	 * @param ci The channel
@@ -719,11 +737,6 @@ class CoreExport Module : public Extensible
 	 */
 	virtual void OnNickDrop(CommandSource &source, NickAlias *na) { throw NotImplementedException(); }
 
-	/** Called when a nick is forbidden
-	 * @param na The nick alias of the forbidden nick
-	 */
-	virtual void OnNickForbidden(NickAlias *na) { throw NotImplementedException(); }
-
 	/** Called when a user groups their nick
 	 * @param u The user grouping
 	 * @param target The target they're grouping to
@@ -748,8 +761,15 @@ class CoreExport Module : public Extensible
 	/** Called when a nick is registered
 	 * @param user The user registering the nick, of any
 	 * @param The nick
+	 * @param pass The password of the newly registered nick
 	 */
-	virtual void OnNickRegister(User *user, NickAlias *na) { throw NotImplementedException(); }
+	virtual void OnNickRegister(User *user, NickAlias *na, const Anope::string &pass) { throw NotImplementedException(); }
+
+	/** Called when a nick is confirmed. This will never be called if registration confirmation is not enabled.
+	 * @param user The user confirming the nick
+	 * @param The account being confirmed
+	 */
+	virtual void OnNickConfirm(User *user, NickCore *) { throw NotImplementedException(); }
 
 	/** Called when a nick is suspended
 	 * @param na The nick alias
@@ -1000,7 +1020,7 @@ class CoreExport Module : public Extensible
 	 */
 	virtual void OnLogMessage(LogInfo *li, const Log *l, const Anope::string &msg) { throw NotImplementedException(); }
 
-	/** Called when a DNS request (question) is recieved.
+	/** Called when a DNS request (question) is received.
 	 * @param req The dns request
 	 * @param reply The reply that will be sent
 	 */
@@ -1084,6 +1104,7 @@ class CoreExport Module : public Extensible
 
 enum Implementation
 {
+	I_OnPostInit,
 	I_OnPreUserKicked, I_OnUserKicked, I_OnReload, I_OnPreBotAssign, I_OnBotAssign, I_OnBotUnAssign, I_OnUserConnect,
 	I_OnNewServer, I_OnUserNickChange, I_OnPreHelp, I_OnPostHelp, I_OnPreCommand, I_OnPostCommand, I_OnSaveDatabase,
 	I_OnLoadDatabase, I_OnEncrypt, I_OnDecrypt, I_OnBotFantasy, I_OnBotNoFantasyAccess, I_OnBotBan, I_OnBadWordAdd,
@@ -1094,8 +1115,8 @@ enum Implementation
 	I_OnPreUserLogoff, I_OnPostUserLogoff, I_OnBotCreate, I_OnBotChange, I_OnBotDelete, I_OnAccessDel, I_OnAccessAdd,
 	I_OnAccessClear, I_OnLevelChange, I_OnChanDrop, I_OnChanRegistered, I_OnChanSuspend, I_OnChanUnsuspend,
 	I_OnCreateChan, I_OnDelChan, I_OnChannelCreate, I_OnChannelDelete, I_OnAkickAdd, I_OnAkickDel, I_OnCheckKick,
-	I_OnChanInfo, I_OnCheckPriv, I_OnGroupCheckPriv, I_OnNickDrop, I_OnNickForbidden, I_OnNickGroup, I_OnNickIdentify,
-	I_OnUserLogin, I_OnNickLogout, I_OnNickRegister, I_OnNickSuspend, I_OnNickUnsuspended, I_OnDelNick, I_OnNickCoreCreate,
+	I_OnChanInfo, I_OnCheckPriv, I_OnGroupCheckPriv, I_OnNickDrop, I_OnNickGroup, I_OnNickIdentify,
+	I_OnUserLogin, I_OnNickLogout, I_OnNickRegister, I_OnNickConfirm, I_OnNickSuspend, I_OnNickUnsuspended, I_OnDelNick, I_OnNickCoreCreate,
 	I_OnDelCore, I_OnChangeCoreDisplay, I_OnNickClearAccess, I_OnNickAddAccess, I_OnNickEraseAccess, I_OnNickClearCert,
 	I_OnNickAddCert, I_OnNickEraseCert, I_OnNickInfo, I_OnBotInfo, I_OnCheckAuthentication, I_OnNickUpdate,
 	I_OnFingerprint, I_OnUserAway, I_OnInvite, I_OnDeleteVhost, I_OnSetVhost, I_OnSetDisplayedHost, I_OnMemoSend, I_OnMemoDel,
@@ -1201,6 +1222,11 @@ class CoreExport ModuleManager
 	 * @return MOD_ERR_OK on success, anything else on fail
 	 */
 	static ModuleReturn DeleteModule(Module *m);
+
+	/** Get the version of Anope the module was compiled against
+	 * @return The version
+	 */
+	static ModuleVersion GetVersion(void *handle);
 };
 
 #endif // MODULES_H

include/modules/bs_badwords.h

@@ -1,14 +1,12 @@
 /* BotServ core functions
  *
- * (C) 2003-2014 Anope Team
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
  *
  * Based on the original code of Epona by Lara.
  * Based on the original code of Services by Andy Church.
- *
- *
  */
 
 /** Flags for badwords
@@ -70,4 +68,3 @@ struct BadWords
 
 	virtual void Check() = 0;
 };
-

include/modules/bs_kick.h

@@ -1,14 +1,12 @@
 /* BotServ core functions
  *
- * (C) 2003-2014 Anope Team
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
  *
  * Based on the original code of Epona by Lara.
  * Based on the original code of Services by Andy Church.
- *
- *
  */
 
 /* Indices for TTB (Times To Ban) */

include/modules/cs_entrymsg.h

@@ -1,9 +1,9 @@
 /*
- * (C) 2003-2014 Anope Team
+ *
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
- *
  */
 
 struct EntryMsg
@@ -32,4 +32,3 @@ struct EntryMessageList : Serialize::Checker<std::vector<EntryMsg *> >
 
 	virtual EntryMsg* Create() = 0;
 };
-

include/modules/cs_log.h

@@ -1,6 +1,6 @@
 /* ChanServ core functions
  *
- * (C) 2003-2014 Anope Team
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
@@ -40,4 +40,3 @@ struct LogSettings : Serialize::Checker<std::vector<LogSetting *> >
  	virtual ~LogSettings() { }
 	virtual LogSetting *Create() = 0;
 };
-

include/modules/cs_mode.h

@@ -1,6 +1,6 @@
 /* ChanServ core functions
  *
- * (C) 2003-2014 Anope Team
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
@@ -80,11 +80,10 @@ struct ModeLocks
 	virtual const ModeLock *GetMLock(const Anope::string &mname, const Anope::string &param = "") = 0;
 
 	/** Get the current mode locks as a string
-	 * @param complete True to show mlock parameters aswell
+	 * @param complete True to show mlock parameters as well
 	 * @return A string of mode locks, eg: +nrt
 	 */
 	virtual Anope::string GetMLockAsString(bool complete) const = 0;
 
 	virtual void Check() = 0;
 };
-

include/modules/dns.h

@@ -1,15 +1,14 @@
 /*
  *
- * (C) 2003-2014 Anope Team
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
  *
  * Based on the original code of Epona by Lara.
  * Based on the original code of Services by Andy Church.
- *
  */
-	
+
 #ifndef DNS_H
 #define DNS_H
 
@@ -53,7 +52,7 @@ namespace DNS
 		QUERYFLAGS_Z = 0x70,
 		QUERYFLAGS_RCODE = 0xF
 	};
-	
+
 	enum Error
 	{
 		ERROR_NONE,
@@ -70,42 +69,42 @@ namespace DNS
 		ERROR_NO_RECORDS,
 		ERROR_INVALIDTYPE
 	};
-	
+
 	struct Question
 	{
 		Anope::string name;
 		QueryType type;
 		unsigned short qclass;
-	
+
 		Question() : type(QUERY_NONE), qclass(0) { }
 		Question(const Anope::string &n, QueryType t, unsigned short c = 1) : name(n), type(t), qclass(c) { }
-		inline bool operator==(const Question & other) const { return name == other.name && type == other.type && qclass == other.qclass; } 
+		inline bool operator==(const Question & other) const { return name == other.name && type == other.type && qclass == other.qclass; }
 
 		struct hash
 		{
-			size_t operator()(const Question &q) const 
+			size_t operator()(const Question &q) const
 			{
 				return Anope::hash_ci()(q.name);
 			}
 		};
 	};
-	
+
 	struct ResourceRecord : Question
 	{
 		unsigned int ttl;
 		Anope::string rdata;
 		time_t created;
-	
+
 		ResourceRecord(const Anope::string &n, QueryType t, unsigned short c = 1) : Question(n, t, c), ttl(0), created(Anope::CurTime) { }
 		ResourceRecord(const Question &q) : Question(q), ttl(0), created(Anope::CurTime) { }
 	};
-	
+
 	struct Query
 	{
 		std::vector<Question> questions;
 		std::vector<ResourceRecord> answers, authorities, additional;
 		Error error;
-	
+
 		Query() : error(ERROR_NONE) { }
 		Query(const Question &q) : error(ERROR_NONE) { questions.push_back(q); }
 	};
@@ -123,14 +122,14 @@ namespace DNS
 
 		virtual void Process(Request *req) = 0;
 		virtual void RemoveRequest(Request *req) = 0;
-	
+
 		virtual bool HandlePacket(ReplySocket *s, const unsigned char *const data, int len, sockaddrs *from) = 0;
-	
+
 		virtual void UpdateSerial() = 0;
 		virtual void Notify(const Anope::string &zone) = 0;
 		virtual uint32_t GetSerial() const = 0;
 	};
-	
+
 	/** A DNS query.
 	 */
 	class Request : public Timer, public Question
@@ -146,22 +145,22 @@ namespace DNS
 
 		Request(Manager *mgr, Module *c, const Anope::string &addr, QueryType qt, bool cache = false) : Timer(0), Question(addr, qt), manager(mgr),
 			use_cache(cache), id(0), creator(c) { }
-		
+
 		virtual ~Request()
 		{
 			manager->RemoveRequest(this);
 		}
-	
+
 		/** Called when this request succeeds
 		 * @param r The query sent back from the nameserver
 		 */
 		virtual void OnLookupComplete(const Query *r) = 0;
-	
+
 		/** Called when this request fails or times out.
 		 * @param r The query sent back from the nameserver, check the error code.
 		 */
 		virtual void OnError(const Query *r) { }
-		
+
 		/** Used to time out the query, xalls OnError and lets the TimerManager
 		 * delete this request.
 		 */
@@ -173,9 +172,7 @@ namespace DNS
 			this->OnError(&rr);
 		}
 	};
-	
+
 } // namespace DNS
-	
+
 #endif // DNS_H
-	
-	

include/modules/encryption.h

@@ -1,13 +1,12 @@
 /*
  *
- * (C) 2003-2014 Anope Team
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
  *
  * Based on the original code of Epona by Lara.
  * Based on the original code of Services by Andy Church.
- *
  */
 
 namespace Encryption
@@ -34,4 +33,3 @@ namespace Encryption
 		virtual IV GetDefaultIV() = 0;
 	};
 }
-

include/modules/httpd.h

@@ -1,3 +1,11 @@
+/*
+ *
+ * (C) 2012-2017 Anope Team
+ * Contact us at team@anope.org
+ *
+ * Please read COPYING and README for further details.
+ */
+
 #ifndef ANOPE_HTTPD_H
 #define ANOPE_HTTPD_H
 
@@ -220,6 +228,9 @@ namespace HTTPUtils
 				case '"':
 					dst += """;
 					break;
+				case '&':
+					dst += "&";
+					break;
 				default:
 					dst += src[i];
 			}

include/modules/ldap.h

@@ -1,8 +1,14 @@
+/*
+ *
+ * (C) 2011-2017 Anope Team
+ * Contact us at team@anope.org
+ *
+ * Please read COPYING and README for further details.
+ */
+
 #ifndef ANOPE_LDAP_H
 #define ANOPE_LDAP_H
 
-typedef int LDAPQuery;
-
 class LDAPException : public ModuleException
 {
  public:
@@ -59,28 +65,26 @@ struct LDAPAttributes : public std::map<Anope::string, std::vector<Anope::string
 	}
 };
 
+enum QueryType
+{
+	QUERY_UNKNOWN,
+	QUERY_BIND,
+	QUERY_SEARCH,
+	QUERY_ADD,
+	QUERY_DELETE,
+	QUERY_MODIFY
+};
+
 struct LDAPResult
 {
 	std::vector<LDAPAttributes> messages;
 	Anope::string error;
 
-	enum QueryType
-	{
-		QUERY_UNKNOWN,
-		QUERY_BIND,
-		QUERY_SEARCH,
-		QUERY_ADD,
-		QUERY_DELETE,
-		QUERY_MODIFY
-	};
-
 	QueryType type;
-	LDAPQuery id;
 
 	LDAPResult()
 	{
 		this->type = QUERY_UNKNOWN;
-		this->id = -1;
 	}
 
 	size_t size() const
@@ -126,48 +130,42 @@ class LDAPProvider : public Service
 
 	/** Attempt to bind to the LDAP server as an admin
 	 * @param i The LDAPInterface the result is sent to
-	 * @return The query ID
 	 */
-	virtual LDAPQuery BindAsAdmin(LDAPInterface *i) = 0;
+	virtual void BindAsAdmin(LDAPInterface *i) = 0;
 
 	/** Bind to LDAP
 	 * @param i The LDAPInterface the result is sent to
 	 * @param who The binddn
 	 * @param pass The password
-	 * @return The query ID
 	 */
-	virtual LDAPQuery Bind(LDAPInterface *i, const Anope::string &who, const Anope::string &pass) = 0;
+	virtual void Bind(LDAPInterface *i, const Anope::string &who, const Anope::string &pass) = 0;
 
 	/** Search ldap for the specified filter
 	 * @param i The LDAPInterface the result is sent to
 	 * @param base The base DN to search
 	 * @param filter The filter to apply
-	 * @return The query ID
 	 */
-	virtual LDAPQuery Search(LDAPInterface *i, const Anope::string &base, const Anope::string &filter) = 0;
+	virtual void Search(LDAPInterface *i, const Anope::string &base, const Anope::string &filter) = 0;
 
 	/** Add an entry to LDAP
 	 * @param i The LDAPInterface the result is sent to
 	 * @param dn The dn of the entry to add
 	 * @param attributes The attributes
-	 * @return The query ID
 	 */
-	virtual LDAPQuery Add(LDAPInterface *i, const Anope::string &dn, LDAPMods &attributes) = 0;
+	virtual void Add(LDAPInterface *i, const Anope::string &dn, LDAPMods &attributes) = 0;
 
 	/** Delete an entry from LDAP
 	 * @param i The LDAPInterface the result is sent to
 	 * @param dn The dn of the entry to delete
-	 * @return The query ID
 	 */
-	virtual LDAPQuery Del(LDAPInterface *i, const Anope::string &dn) = 0;
+	virtual void Del(LDAPInterface *i, const Anope::string &dn) = 0;
 
 	/** Modify an existing entry in LDAP
 	 * @param i The LDAPInterface the result is sent to
 	 * @param base The base DN to modify
 	 * @param attributes The attributes to modify
-	 * @return The query ID
 	 */
-	virtual LDAPQuery Modify(LDAPInterface *i, const Anope::string &base, LDAPMods &attributes) = 0;
+	virtual void Modify(LDAPInterface *i, const Anope::string &base, LDAPMods &attributes) = 0;
 };
 
 #endif // ANOPE_LDAP_H

include/modules/ns_cert.h

@@ -1,6 +1,6 @@
 /* NickServ core functions
  *
- * (C) 2003-2014 Anope Team
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
@@ -68,4 +68,3 @@ class CertService : public Service
 
 	virtual NickCore* FindAccountFromCert(const Anope::string &cert) = 0;
 };
-

include/modules/os_forbid.h

@@ -1,3 +1,11 @@
+/*
+ *
+ * (C) 2011-2017 Anope Team
+ * Contact us at team@anope.org
+ *
+ * Please read COPYING and README for further details.
+ */
+
 #ifndef OS_FORBID_H
 #define OS_FORBID_H
 
@@ -37,10 +45,11 @@ class ForbidService : public Service
 
 	virtual ForbidData *FindForbid(const Anope::string &mask, ForbidType type) = 0;
 
+	virtual ForbidData *FindForbidExact(const Anope::string &mask, ForbidType type) = 0;
+
 	virtual std::vector<ForbidData *> GetForbids() = 0;
 };
 
 static ServiceReference<ForbidService> forbid_service("ForbidService", "forbid");
 
 #endif
-

include/modules/os_ignore.h

@@ -1,6 +1,6 @@
 /* OperServ ignore interface
  *
- * (C) 2003-2014 Anope Team
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
@@ -9,7 +9,6 @@
  * Based on the original code of Services by Andy Church.
  */
 
-
 struct IgnoreData
 {
 	Anope::string mask;
@@ -26,7 +25,7 @@ class IgnoreService : public Service
 {
  protected:
 	IgnoreService(Module *c) : Service(c, "IgnoreService", "ignore") { }
-	
+
  public:
 	virtual void AddIgnore(IgnoreData *) = 0;
 
@@ -42,4 +41,3 @@ class IgnoreService : public Service
 };
 
 static ServiceReference<IgnoreService> ignore_service("IgnoreService", "ignore");
-

include/modules/os_news.h

@@ -1,3 +1,11 @@
+/*
+ *
+ * (C) 2011-2017 Anope Team
+ * Contact us at team@anope.org
+ *
+ * Please read COPYING and README for further details.
+ */
+
 #ifndef OS_NEWS
 #define OS_NEWS
 
@@ -31,15 +39,14 @@ class NewsService : public Service
 	NewsService(Module *m) : Service(m, "NewsService", "news") { }
 
 	virtual NewsItem *CreateNewsItem() = 0;
-	
+
 	virtual void AddNewsItem(NewsItem *n) = 0;
-	
+
 	virtual void DelNewsItem(NewsItem *n) = 0;
-	
+
 	virtual std::vector<NewsItem *> &GetNewsList(NewsType t) = 0;
 };
 
 static ServiceReference<NewsService> news_service("NewsService", "news");
 
 #endif // OS_NEWS
-

include/modules/os_session.h

@@ -1,3 +1,11 @@
+/*
+ *
+ * (C) 2011-2017 Anope Team
+ * Contact us at team@anope.org
+ *
+ * Please read COPYING and README for further details.
+ */
+
 #ifndef OS_SESSION_H
 #define OS_SESSION_H
 
@@ -7,7 +15,7 @@ struct Session
 	unsigned count;                 /* Number of clients with this host */
 	unsigned hits;                  /* Number of subsequent kills for a host */
 
-	Session(const Anope::string &ip, int len) : addr(ip, len), count(1), hits(0) { }
+	Session(const sockaddrs &ip, int len) : addr(ip, len), count(1), hits(0) { }
 };
 
 struct Exception : Serializable
@@ -40,7 +48,7 @@ class SessionService : public Service
 
 	virtual Exception *FindException(User *u) = 0;
 
-	virtual Exception *FindException(const Anope::string &host) = 0; 
+	virtual Exception *FindException(const Anope::string &host) = 0;
 
 	virtual ExceptionVector &GetExceptions() = 0;
 
@@ -84,4 +92,3 @@ Serializable* Exception::Unserialize(Serializable *obj, Serialize::Data &data)
 }
 
 #endif
-

include/modules/pseudoclients/chanserv.h

@@ -1,3 +1,11 @@
+/*
+ *
+ * (C) 2011-2017 Anope Team
+ * Contact us at team@anope.org
+ *
+ * Please read COPYING and README for further details.
+ */
+
 #ifndef CHANSERV_H
 #define CHANSERV_H
 
@@ -15,4 +23,3 @@ class ChanServService : public Service
 };
 
 #endif // CHANSERV_H
-

include/modules/pseudoclients/global.h

@@ -1,3 +1,11 @@
+/*
+ *
+ * (C) 2011-2017 Anope Team
+ * Contact us at team@anope.org
+ *
+ * Please read COPYING and README for further details.
+ */
+
 #ifndef GLOBAL_H
 #define GLOBAL_H
 
@@ -17,4 +25,3 @@ class GlobalService : public Service
 };
 
 #endif // GLOBAL_H
-

include/modules/pseudoclients/memoserv.h

@@ -1,3 +1,11 @@
+/*
+ *
+ * (C) 2011-2017 Anope Team
+ * Contact us at team@anope.org
+ *
+ * Please read COPYING and README for further details.
+ */
+
 #ifndef MEMOSERV_H
 #define MEMOSERV_H
 
@@ -31,4 +39,3 @@ class MemoServService : public Service
 };
 
 #endif // MEMOSERV_H
-

include/modules/pseudoclients/nickserv.h

@@ -1,3 +1,11 @@
+/*
+ *
+ * (C) 2011-2017 Anope Team
+ * Contact us at team@anope.org
+ *
+ * Please read COPYING and README for further details.
+ */
+
 #ifndef NICKSERV_H
 #define NICKSERV_H
 
@@ -14,4 +22,3 @@ class NickServService : public Service
 };
 
 #endif // NICKSERV_H
-

include/modules/redis.h

@@ -1,10 +1,9 @@
 /*
  *
- * (C) 2003-2014 Anope Team
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
- *
  */
 
 namespace Redis
@@ -24,7 +23,7 @@ namespace Redis
 
 		Reply() { Clear(); }
 		~Reply() { Clear(); }
-		
+
 		void Clear()
 		{
 			type = NOT_PARSED;
@@ -59,6 +58,8 @@ namespace Redis
 	 public:
 		Provider(Module *c, const Anope::string &n) : Service(c, "Redis::Provider", n) { }
 
+		virtual bool IsSocketDead() = 0;
+
 		virtual void SendCommand(Interface *i, const std::vector<Anope::string> &cmds) = 0;
 		virtual void SendCommand(Interface *i, const Anope::string &str) = 0;
 
@@ -71,4 +72,3 @@ namespace Redis
 		virtual void CommitTransaction() = 0;
 	};
 }
-

include/modules/sasl.h

@@ -1,6 +1,6 @@
 /*
  *
- * (C) 2014 Anope Team
+ * (C) 2014-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
@@ -46,6 +46,7 @@ namespace SASL
 	{
 		time_t created;
 		Anope::string uid;
+		Anope::string hostname, ip;
 		Reference<Mechanism> mech;
 
 		Session(Mechanism *m, const Anope::string &u) : created(Anope::CurTime), uid(u), mech(m) { }
@@ -76,9 +77,10 @@ namespace SASL
 	class IdentifyRequest : public ::IdentifyRequest
 	{
 		Anope::string uid;
+		Anope::string hostname, ip;
 
 	 public:
-		IdentifyRequest(Module *m, const Anope::string &id, const Anope::string &acc, const Anope::string &pass) : ::IdentifyRequest(m, acc, pass), uid(id) { }
+		IdentifyRequest(Module *m, const Anope::string &id, const Anope::string &acc, const Anope::string &pass, const Anope::string &h, const Anope::string &i) : ::IdentifyRequest(m, acc, pass), uid(id), hostname(h), ip(i) { }
 
 		void OnSuccess() anope_override
 		{
@@ -86,13 +88,21 @@ namespace SASL
 				return;
 
 			NickAlias *na = NickAlias::Find(GetAccount());
-			if (!na || na->nc->HasExt("NS_SUSPENDED"))
+			if (!na || na->nc->HasExt("NS_SUSPENDED") || na->nc->HasExt("UNCONFIRMED"))
+				return OnFail();
+
+			unsigned int maxlogins = Config->GetModule("ns_identify")->Get<unsigned int>("maxlogins");
+			if (maxlogins && na->nc->users.size() >= maxlogins)
 				return OnFail();
 
 			Session *s = sasl->GetSession(uid);
 			if (s)
 			{
-				Log(Config->GetClient("NickServ")) << "A user identified to account " << this->GetAccount() << " using SASL";
+				Anope::string user = "A user";
+				if (!hostname.empty() && !ip.empty())
+					user = hostname + " (" + ip + ")";
+
+				Log(this->GetOwner(), "sasl", Config->GetClient("NickServ")) << user << " identified to account " << this->GetAccount() << " using SASL";
 				sasl->Succeed(s, na->nc);
 				delete s;
 			}
@@ -116,8 +126,14 @@ namespace SASL
 				accountstatus = "nonexistent ";
 			else if (na->nc->HasExt("NS_SUSPENDED"))
 				accountstatus = "suspended ";
+			else if (na->nc->HasExt("UNCONFIRMED"))
+				accountstatus = "unconfirmed ";
 
-			Log(Config->GetClient("NickServ")) << "A user failed to identify for " << accountstatus << "account " << this->GetAccount() << " using SASL";
+			Anope::string user = "A user";
+			if (!hostname.empty() && !ip.empty())
+				user = hostname + " (" + ip + ")";
+
+			Log(this->GetOwner(), "sasl", Config->GetClient("NickServ")) << user << " failed to identify for " << accountstatus << "account " << this->GetAccount() << " using SASL";
 		}
 	};
 }

include/modules/set_misc.h

@@ -1,5 +1,6 @@
 /*
- * (C) 2003-2014 Anope Team
+ *
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
@@ -14,4 +15,3 @@ struct MiscData
 	MiscData() { }
 	virtual ~MiscData() { }
 };
-

include/modules/sql.h

@@ -1,5 +1,6 @@
 /*
- * (C) 2003-2014 Anope Team
+ *
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
@@ -213,4 +214,3 @@ namespace SQL
 	};
 
 }
-

include/modules/ssl.h

@@ -1,9 +1,15 @@
+/*
+ *
+ * (C) 2010-2017 Anope Team
+ * Contact us at team@anope.org
+ *
+ * Please read COPYING and README for further details.
+ */
 
 class SSLService : public Service
 {
  public:
 	SSLService(Module *o, const Anope::string &n) : Service(o, "SSLService", n) { }
-	
+
 	virtual void Init(Socket *s) = 0;
 };
-

include/modules/suspend.h

@@ -1,5 +1,6 @@
 /*
- * (C) 2003-2014 Anope Team
+ *
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.

include/modules/xmlrpc.h

@@ -1,3 +1,11 @@
+/*
+ *
+ * (C) 2010-2017 Anope Team
+ * Contact us at team@anope.org
+ *
+ * Please read COPYING and README for further details.
+ */
+
 #include "httpd.h"
 
 class XMLRPCRequest
@@ -9,7 +17,7 @@ class XMLRPCRequest
 	Anope::string id;
 	std::deque<Anope::string> data;
 	HTTPReply& r;
-	
+
 	XMLRPCRequest(HTTPReply &_r) : r(_r) { }
 	inline void reply(const Anope::string &dname, const Anope::string &ddata) { this->replies.insert(std::make_pair(dname, ddata)); }
 	inline const std::map<Anope::string, Anope::string> &get_replies() { return this->replies; }
@@ -37,4 +45,3 @@ class XMLRPCServiceInterface : public Service
 
 	virtual void Reply(XMLRPCRequest &request) = 0;
 };
-

include/opertype.h

@@ -1,9 +1,9 @@
 /*
- * Copyright (C) 2008-2011 Robin Burchell <w00t@inspircd.org>
- * Copyright (C) 2008-2014 Anope Team <team@anope.org>
+ *
+ * (C) 2008-2011 Robin Burchell <w00t@inspircd.org>
+ * (C) 2008-2017 Anope Team <team@anope.org>
  *
  * Please read COPYING and README for further details.
- *
  */
 
 #ifndef OPERTYPE_H
@@ -33,7 +33,7 @@ struct CoreExport Oper
 	virtual ~Oper();
 
 	static std::vector<Oper *> opers;
-	
+
 	/** Find an oper block by name
 	 * @param name The name
 	 * @return the oper block

include/protocol.h

@@ -1,13 +1,12 @@
 /*
  *
- * (C) 2003-2014 Anope Team
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
  *
  * Based on the original code of Epona by Lara.
  * Based on the original code of Services by Andy Church.
- *
  */
 
 #ifndef PROTOCOL_H
@@ -40,6 +39,9 @@ class CoreExport IRCDProto : public Service
 	virtual void SendNumericInternal(int numeric, const Anope::string &dest, const Anope::string &buf);
 
 	const Anope::string &GetProtocolName();
+	virtual void Parse(const Anope::string &, Anope::string &, Anope::string &, std::vector<Anope::string> &);
+	virtual Anope::string Format(const Anope::string &source, const Anope::string &message);
+
 	/* Modes used by default by our clients */
 	Anope::string DefaultPseudoclientModes;
 	/* Can we force change a users's nick? */
@@ -64,11 +66,17 @@ class CoreExport IRCDProto : public Service
 	bool CanCertFP;
 	/* Whether this IRCd requires unique IDs for each user or server. See TS6/P10. */
 	bool RequiresID;
+	/* If this IRCd has unique ids, whether the IDs and nicknames are ambiguous */
+	bool AmbiguousID;
 	/* The maximum number of modes we are allowed to set with one MODE command */
 	unsigned MaxModes;
 	/* The maximum number of bytes a line may have */
 	unsigned MaxLine;
 
+	/* Retrieves the next free UID or SID */
+	virtual Anope::string UID_Retrieve();
+	virtual Anope::string SID_Retrieve();
+
 	/** Sets the server in NOOP mode. If NOOP mode is enabled, no users
 	 * will be able to oper on the server.
 	 * @param s The server
@@ -187,9 +195,9 @@ class CoreExport IRCDProto : public Service
 	 * initial handshake requirements.
 	 */
 	virtual void SendConnect() = 0;
-	
-	/** Called right before we begin our burst, after we have handshaked successfully with the uplink/
-	 * At this point none of our servesr, users, or channels exist on the uplink
+
+	/** Called right before we begin our burst, after we have handshaked successfully with the uplink.
+	 * At this point none of our servers, users, or channels exist on the uplink
 	 */
 	virtual void SendBOB() { }
 	virtual void SendEOB() { }
@@ -219,8 +227,9 @@ class CoreExport IRCDProto : public Service
 	 */
 	virtual void SendOper(User *u);
 
+	virtual void SendSASLMechanisms(std::vector<Anope::string> &) { }
 	virtual void SendSASLMessage(const SASL::Message &) { }
-	virtual void SendSVSLogin(const Anope::string &uid, const Anope::string &acc) { }
+	virtual void SendSVSLogin(const Anope::string &uid, const Anope::string &acc, const Anope::string &vident, const Anope::string &vhost) { }
 
 	virtual bool IsNickValid(const Anope::string &);
 	virtual bool IsChannelValid(const Anope::string &);
@@ -232,6 +241,8 @@ class CoreExport IRCDProto : public Service
 	 * Defaults to Config->ListSize
 	 */
 	virtual unsigned GetMaxListFor(Channel *c);
+
+	virtual Anope::string NormalizeMask(const Anope::string &mask);
 };
 
 class CoreExport MessageSource

include/pstdint.h

@@ -5,11 +5,11 @@
  *
  *  Copyright (c) 2005-2011 Paul Hsieh
  *  All rights reserved.
- *  
+ *
  *  Redistribution and use in source and binary forms, with or without
  *  modification, are permitted provided that the following conditions
  *  are met:
- *  
+ *
  *  1. Redistributions of source code must retain the above copyright
  *     notice, this list of conditions and the following disclaimer.
  *  2. Redistributions in binary form must reproduce the above copyright
@@ -17,7 +17,7 @@
  *     documentation and/or other materials provided with the distribution.
  *  3. The name of the author may not be used to endorse or promote products
  *     derived from this software without specific prior written permission.
- *  
+ *
  *  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  *  IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  *  OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
@@ -73,7 +73,7 @@
  *       include stdint.h.  The hope is that one or the other can be
  *       used with no real difference.
  *
- *    5) In the current verison, if your platform can't represent
+ *    5) In the current version, if your platform can't represent
  *       int32_t, int16_t and int8_t, it just dumps out with a compiler
  *       error.
  *
@@ -730,15 +730,15 @@ typedef uint_least32_t uint_fast32_t;
 
 #if defined (__TEST_PSTDINT_FOR_CORRECTNESS)
 
-/* 
+/*
  *  Please compile with the maximum warning settings to make sure macros are not
  *  defined more than once.
  */
- 
+
 #include <stdlib.h>
 #include <stdio.h>
 #include <string.h>
- 
+
 #define glue3_aux(x,y,z) x ## y ## z
 #define glue3(x,y,z) glue3_aux(x,y,z)
 
@@ -748,7 +748,7 @@ typedef uint_least32_t uint_fast32_t;
 #define DECL(us,bits) glue3(DECL,us,) (bits)
 
 #define TESTUMAX(bits) glue3(u,bits,=) glue3(~,u,bits); if (glue3(UINT,bits,_MAX) glue3(!=,u,bits)) printf ("Something wrong with UINT%d_MAX\n", bits)
- 
+
 int main () {
 	DECL(I,8)
 	DECL(U,8)
@@ -765,7 +765,7 @@ int main () {
 	char str0[256], str1[256];
 
 	sprintf (str0, "%d %x\n", 0, ~0);
-	
+
 	sprintf (str1, "%d %x\n",  i8, ~0);
 	if (0 != strcmp (str0, str1)) printf ("Something wrong with i8 : %s\n", str1);
 	sprintf (str1, "%u %x\n",  u8, ~0);
@@ -773,20 +773,20 @@ int main () {
 	sprintf (str1, "%d %x\n",  i16, ~0);
 	if (0 != strcmp (str0, str1)) printf ("Something wrong with i16 : %s\n", str1);
 	sprintf (str1, "%u %x\n",  u16, ~0);
-	if (0 != strcmp (str0, str1)) printf ("Something wrong with u16 : %s\n", str1);	
+	if (0 != strcmp (str0, str1)) printf ("Something wrong with u16 : %s\n", str1);
 	sprintf (str1, "%" PRINTF_INT32_MODIFIER "d %x\n",  i32, ~0);
 	if (0 != strcmp (str0, str1)) printf ("Something wrong with i32 : %s\n", str1);
 	sprintf (str1, "%" PRINTF_INT32_MODIFIER "u %x\n",  u32, ~0);
 	if (0 != strcmp (str0, str1)) printf ("Something wrong with u32 : %s\n", str1);
-#ifdef INT64_MAX	
+#ifdef INT64_MAX
 	sprintf (str1, "%" PRINTF_INT64_MODIFIER "d %x\n",  i64, ~0);
 	if (0 != strcmp (str0, str1)) printf ("Something wrong with i64 : %s\n", str1);
 #endif
 	sprintf (str1, "%" PRINTF_INTMAX_MODIFIER "d %x\n",  imax, ~0);
 	if (0 != strcmp (str0, str1)) printf ("Something wrong with imax : %s\n", str1);
 	sprintf (str1, "%" PRINTF_INTMAX_MODIFIER "u %x\n",  umax, ~0);
-	if (0 != strcmp (str0, str1)) printf ("Something wrong with umax : %s\n", str1);	
-	
+	if (0 != strcmp (str0, str1)) printf ("Something wrong with umax : %s\n", str1);
+
 	TESTUMAX(8);
 	TESTUMAX(16);
 	TESTUMAX(32);

include/regchannel.h

@@ -1,10 +1,9 @@
 /*
  *
- * (C) 2008-2014 Anope Team
+ * (C) 2008-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
- *
  */
 
 #ifndef REGCHANNEL_H
@@ -133,8 +132,8 @@ class CoreExport ChannelInfo : public Serializable, public Extensible
 	/** Retrieve the access for a user or group in the form of a vector of access entries
 	 * (as multiple entries can affect a single user).
 	 */
-	AccessGroup AccessFor(const User *u);
-	AccessGroup AccessFor(const NickCore *nc);
+	AccessGroup AccessFor(const User *u, bool updateLastUsed = true);
+	AccessGroup AccessFor(const NickCore *nc, bool updateLastUsed = true);
 
 	/** Get the size of the accss vector for this channel
 	 * @return The access vector size
@@ -198,6 +197,11 @@ class CoreExport ChannelInfo : public Serializable, public Extensible
 	 */
 	void ClearAkick();
 
+	/** Get the level entries for the channel.
+	 * @return The levels for the channel.
+	 */
+	const Anope::map<int16_t> &GetLevelEntries();
+
 	/** Get the level for a privilege
 	 * @param priv The privilege name
 	 * @return the level
@@ -227,7 +231,7 @@ class CoreExport ChannelInfo : public Serializable, public Extensible
 	 */
 	Anope::string GetIdealBan(User *u) const;
 
-	/** Finds a ChannelInfo 
+	/** Finds a ChannelInfo
 	 * @param name channel name to lookup
 	 * @return the ChannelInfo associated with the channel
 	 */

include/regexpr.h

@@ -1,13 +1,12 @@
 /*
  *
- * (C) 2003-2014 Anope Team
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
  *
  * Based on the original code of Epona by Lara.
  * Based on the original code of Services by Andy Church.
- *
  */
 
 #ifndef REGEXPR_H
@@ -44,4 +43,3 @@ class CoreExport RegexProvider : public Service
 };
 
 #endif // REGEXPR_H
-

include/serialize.h

@@ -1,13 +1,12 @@
 /*
  *
- * (C) 2003-2014 Anope Team
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
  *
  * Based on the original code of Epona by Lara.
  * Based on the original code of Services by Andy Church.
- *
  */
 
 #ifndef SERIALIZE_H
@@ -60,14 +59,14 @@ class CoreExport Serializable : public virtual Base
 	 * constructed before other objects are if it isn't.
 	 */
 	static std::list<Serializable *> *SerializableItems;
+	friend class Serialize::Type;
 	/* The type of item this object is */
 	Serialize::Type *s_type;
- private:
  	/* Iterator into serializable_items */
 	std::list<Serializable *>::iterator s_iter;
-	/* The hash of the last serialized form of this object commited to the database */
+	/* The hash of the last serialized form of this object committed to the database */
 	size_t last_commit;
-	/* The last time this object was commited to the database */
+	/* The last time this object was committed to the database */
 	time_t last_commit_time;
 
  protected:
@@ -109,7 +108,7 @@ class CoreExport Serializable : public virtual Base
  * of class that inherits from Serialiable. Used for unserializing objects
  * of this type, as it requires a function pointer to a static member function.
  */
-class CoreExport Serialize::Type
+class CoreExport Serialize::Type : public Base
 {
 	typedef Serializable* (*unserialize_func)(Serializable *obj, Serialize::Data &);
 
@@ -188,7 +187,7 @@ class Serialize::Checker
 {
 	Anope::string name;
 	T obj;
-	mutable Serialize::Type *type;
+	mutable ::Reference<Serialize::Type> type;
 
 	inline void Check() const
 	{

include/servers.h

@@ -1,13 +1,12 @@
 /*
  *
- * (C) 2003-2014 Anope Team
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
  *
  * Based on the original code of Epona by Lara.
  * Based on the original code of Services by Andy Church.
- *
  */
 
 #ifndef SERVERS_H
@@ -23,10 +22,6 @@ extern CoreExport Server *Me;
 
 namespace Servers
 {
-	/* Retrieves the next free TS6 UID or SID */
-	extern CoreExport const Anope::string TS6_UID_Retrieve();
-	extern CoreExport const Anope::string TS6_SID_Retrieve();
-
 	/* Gets our uplink. Note we don't actually have an "uplink", this is just
 	 * the only server whose uplink *is* Me that is not a juped server.
 	 * @return Our uplink, or NULL if not uplinked to anything

include/service.h

@@ -1,13 +1,12 @@
 /*
  *
- * (C) 2003-2014 Anope Team
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
  *
  * Based on the original code of Epona by Lara.
  * Based on the original code of Services by Andy Church.
- *
  */
 
 #ifndef SERVICE_H
@@ -172,4 +171,3 @@ class ServiceAlias
 };
 
 #endif // SERVICE_H
-

include/services.h

@@ -1,13 +1,12 @@
 /*
  *
- * (C) 2003-2014 Anope Team
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
  *
  * Based on the original code of Epona by Lara.
  * Based on the original code of Services by Andy Church.
- *
  */
 
 #ifndef SERVICES_H

include/socketengine.h

@@ -1,13 +1,12 @@
 /*
  *
- * (C) 2003-2014 Anope Team
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
  *
  * Based on the original code of Epona by Lara.
  * Based on the original code of Services by Andy Church.
- *
  */
 
 #ifndef SOCKETENGINE_H

include/sockets.h

@@ -1,13 +1,12 @@
 /*
  *
- * (C) 2003-2014 Anope Team
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
  *
  * Based on the original code of Epona by Lara.
  * Based on the original code of Services by Andy Church.
- *
  */
 
 #ifndef SOCKETS_H
@@ -39,6 +38,10 @@ union CoreExport sockaddrs
 	 */
 	void clear();
 
+	/** Get address family.
+	 */
+	int family() const;
+
 	/** Get the size of the sockaddr we represent
 	 * @return The size
 	 */
@@ -54,12 +57,17 @@ union CoreExport sockaddrs
 	 */
 	Anope::string addr() const;
 
+	/** Get the reverse address represented by this addr
+	 * @return The reverse address
+	 */
+	Anope::string reverse() const;
+
 	/* Is this address ipv6? */
 	bool ipv6() const;
 
 	/** Check if this sockaddr has data in it
 	 */
-	bool operator()() const;
+	bool valid() const;
 
 	/** Compares with sockaddr with another. Compares address type, port, and address
 	 * @return true if they are the same
@@ -82,8 +90,6 @@ union CoreExport sockaddrs
 	 * @throws A socket exception if given an invalid structure
 	 */
 	void ntop(int type, const void *src);
-
-	bool valid() const;
 };
 
 class CoreExport cidr
@@ -94,6 +100,7 @@ class CoreExport cidr
  public:
  	cidr(const Anope::string &ip);
 	cidr(const Anope::string &ip, unsigned char len);
+	cidr(const sockaddrs &ip, unsigned char len);
 	Anope::string mask() const;
 	bool match(const sockaddrs &other);
 	bool valid() const;
@@ -373,7 +380,7 @@ class CoreExport ListenSocket : public virtual Socket
 	virtual ~ListenSocket();
 
 	/** Process what has come in from the connection
-	 * @return false to destory this socket
+	 * @return false to destroy this socket
 	 */
 	bool ProcessRead();
 

include/threadengine.h

@@ -1,13 +1,12 @@
 /*
  *
- * (C) 2003-2014 Anope Team
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
  *
  * Based on the original code of Epona by Lara.
  * Based on the original code of Services by Andy Church.
- *
  */
 
 #ifndef THREADENGINE_H

include/timers.h

@@ -1,13 +1,12 @@
 /* Timer include stuff.
  *
- * (C) 2003-2014 Anope Team
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
  *
  * Based on the original code of Epona by Lara.
  * Based on the original code of Services by Andy Church.
- *
  */
 
 #ifndef TIMERS_H

include/uplink.h

@@ -1,13 +1,12 @@
 /*
  *
- * (C) 2003-2014 Anope Team
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
  *
  * Based on the original code of Epona by Lara.
  * Based on the original code of Services by Andy Church.
- *
  */
 
 #ifndef UPLINK_H
@@ -25,6 +24,7 @@ namespace Uplink
 class UplinkSocket : public ConnectionSocket, public BufferedSocket
 {
  public:
+	bool error;
 	UplinkSocket();
 	~UplinkSocket();
 	bool ProcessRead() anope_override;
@@ -51,4 +51,3 @@ class UplinkSocket : public ConnectionSocket, public BufferedSocket
 extern CoreExport UplinkSocket *UplinkSock;
 
 #endif // UPLINK_H
-

include/users.h

@@ -1,14 +1,12 @@
 /*
  *
  * (C) 2008-2011 Robin Burchell <w00t@inspircd.org>
- * (C) 2003-2014 Anope Team
- * Contact us at team@anope.org
+ * (C) 2003-2017 Anope Team <team@anope.org>
  *
  * Please read COPYING and README for further details.
  *
  * Based on the original code of Epona by Lara.
  * Based on the original code of Services by Andy Church.
- *
  */
 
 #ifndef USERS_H
@@ -20,6 +18,7 @@
 #include "serialize.h"
 #include "commands.h"
 #include "account.h"
+#include "sockets.h"
 
 typedef Anope::hash_map<User *> user_map;
 
@@ -43,7 +42,7 @@ class CoreExport User : public virtual Base, public Extensible, public CommandRe
 	Anope::string vident;
 	Anope::string ident;
 	Anope::string uid;
-	/* If the user is on the access list of the nick theyre on */
+	/* If the user is on the access list of the nick they're on */
 	bool on_access;
 	/* Map of user modes and the params this user has (if any) */
 	ModeList modes;
@@ -71,7 +70,7 @@ class CoreExport User : public virtual Base, public Extensible, public CommandRe
 	/* SSL Fingerprint */
 	Anope::string fingerprint;
 	/* User's IP */
-	Anope::string ip;
+	sockaddrs ip;
 	/* Server user is connected to */
 	Server *server;
 	/* When the user signed on. Set on connect and never modified. */
@@ -102,7 +101,7 @@ class CoreExport User : public virtual Base, public Extensible, public CommandRe
 	 * @param svhost The vhost of the user
 	 * @param sip The ip of the user
 	 * @param sserver The server of the user
-	 * @param srealname The realname/gecos of teh user
+	 * @param srealname The realname/gecos of the user
 	 * @param ts User's timestamp
 	 * @param smodes User's modes
 	 * @param suid The unique identifier of the user.
@@ -348,10 +347,9 @@ class CoreExport User : public virtual Base, public Extensible, public CommandRe
 
 	/* Returns a mask that will most likely match any address the
 	 * user will have from that location.  For IP addresses, wildcards the
-	 * appropriate subnet mask (e.g. 35.1.1.1 -> 35.*; 128.2.1.1 -> 128.2.*);
-	 * for named addresses, wildcards the leftmost part of the name unless the
-	 * name only contains two parts.  If the username begins with a ~, delete
-	 * it.
+	 * last octet (e.g. 35.1.1.1 -> 35.1.1.*). for named addresses, wildcards
+	 * the leftmost part of the name unless the  name only contains two parts.
+	 * If the username begins with a ~, replace with *.
 	 */
 	Anope::string Mask() const;
 

include/version.cpp

@@ -1,6 +1,6 @@
 /* Build bumper
  *
- * (C) 2003-2014 Anope Team
+ * (C) 2003-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
@@ -13,7 +13,7 @@
 #include <iostream>
 #include <fstream>
 #include <sstream>
-#include <list>
+#include <map>
 
 static std::string get_git_hash(const std::string &git_dir)
 {
@@ -28,7 +28,7 @@ static std::string get_git_hash(const std::string &git_dir)
 		fd.close();
 		return "";
 	}
-	
+
 	fd.close();
 
 	filebuf = filebuf.substr(5);
@@ -45,29 +45,16 @@ static std::string get_git_hash(const std::string &git_dir)
 	return "g" + filebuf.substr(0, 7);
 }
 
-int main(int argc, char *argv[])
+static bool read_version_sh(const std::string &version_sh, std::map<std::string, std::string> &versions)
 {
-	if (argc < 3)
-	{
-		std::cerr << "Syntax: " << argv[0] << " <base> <version.h>" << std::endl;
-		return 1;
-	}
-
-	std::string version_sh = std::string(argv[1]) + "/src/version.sh";
-	std::string git_dir = std::string(argv[1]) + "/.git";
-
-	std::fstream fd;
-
-	fd.clear();
-	fd.open(version_sh.c_str(), std::ios::in);
+	std::fstream fd(version_sh.c_str(), std::ios::in);
 	if (!fd.is_open())
 	{
 		std::cerr << "Error: Unable to open src/version.sh for reading: " << version_sh << std::endl;
-		return 1;
+		return false;
 	}
 
 	std::string filebuf;
-	std::list<std::pair<std::string, std::string> > versions;
 	while (getline(fd, filebuf))
 	{
 		if (!filebuf.find("VERSION_"))
@@ -75,24 +62,25 @@ int main(int argc, char *argv[])
 			size_t eq = filebuf.find('=');
 
 			std::string type = filebuf.substr(0, eq);
-			std::string value = filebuf.substr(eq + 2, filebuf.length() - eq - 3);
-			versions.push_back(std::make_pair(type, value));
+			std::string value = filebuf.substr(eq + 1);
+
+			versions[type] = value;
 		}
 	}
 
 	fd.close();
 
-	std::string git_version = get_git_hash(git_dir);
-	if (!git_version.empty())
-		versions.push_back(std::make_pair("VERSION_GIT", git_version));
+	return true;
+}
 
-	fd.clear();
-	fd.open(argv[2], std::ios::in);
+static bool write_build_h(const std::string &buildh, const std::string &git_version)
+{
+	std::fstream fd(buildh.c_str(), std::ios::in);
 
 	std::string build = "#define BUILD	1";
 	if (fd.is_open())
 	{
-		while (getline(fd, filebuf))
+		for (std::string filebuf; getline(fd, filebuf);)
 		{
 			if (!filebuf.find("#define BUILD"))
 			{
@@ -110,27 +98,91 @@ int main(int argc, char *argv[])
 	}
 
 	fd.clear();
-	fd.open(argv[2], std::ios::out);
-
+	fd.open(buildh.c_str(), std::ios::out);
 	if (!fd.is_open())
 	{
-		std::cerr << "Error: Unable to include/version.h for writing: " << argv[2] << std::endl;
-		return 1;
+		std::cerr << "Error: Unable to open build.h for writing: " << buildh << std::endl;
+		return false;
 	}
 
 	fd << "/* This file is automatically generated by version.cpp - do not edit it! */" << std::endl;
+	fd << build << std::endl;
+	if (!git_version.empty())
+		fd << "#define VERSION_GIT \"" << git_version << "\"" << std::endl;
+	fd.close();
 
-	for (std::list<std::pair<std::string, std::string> >::iterator it = versions.begin(), it_end = versions.end(); it != it_end; ++it)
+	return true;
+}
+
+static void read_version_h(const std::string &versionh, std::map<std::string, std::string> &versions)
+{
+	std::fstream fd(versionh.c_str(), std::ios::in);
+
+	if (!fd.is_open())
+		return;
+
+	for (std::string filebuf; getline(fd, filebuf);)
 	{
-		if (it->first == "VERSION_EXTRA" || it->first == "VERSION_GIT")
-			fd << "#define " << it->first << " \"" << it->second << "\"" << std::endl;
-		else
-			fd << "#define " << it->first << " " << it->second << std::endl;
+		if (!filebuf.find("#define VERSION_"))
+		{
+			size_t space = filebuf.substr(8).find(' ');
+
+			std::string name = filebuf.substr(8).substr(0, space),
+				version = filebuf.substr(8).substr(space + 1);
+
+			versions[name] = version;
+		}
 	}
 
-	fd << build << std::endl;
+	fd.close();
+}
+
+static bool write_version_h(const std::string &versionh, const std::map<std::string, std::string> &versions)
+{
+	std::fstream fd(versionh.c_str(), std::ios::out);
+
+	if (!fd.is_open())
+		return false;
+
+	for (std::map<std::string, std::string>::const_iterator it = versions.begin(); it != versions.end(); ++it)
+	{
+		fd << "#define " << it->first << " " << it->second << std::endl;
+	}
 
 	fd.close();
 
+	return true;
+}
+
+int main(int argc, char *argv[])
+{
+	if (argc < 4)
+	{
+		std::cerr << "Syntax: " << argv[0] << " <base> <version.h> <build.h>" << std::endl;
+		return 1;
+	}
+
+	std::string version_sh = std::string(argv[1]) + "/src/version.sh";
+	std::string git_dir = std::string(argv[1]) + "/.git";
+	std::string versionh = argv[2];
+	std::string buildh = argv[3];
+
+	std::map<std::string, std::string> versions, old_versions;
+
+	if (!read_version_sh(version_sh, versions))
+		return -1;
+
+	std::string git_version = get_git_hash(git_dir);
+	if (!write_build_h(buildh, git_version))
+		return -1;
+
+	read_version_h(versionh, old_versions);
+
+	if (versions == old_versions)
+		return 0;
+
+	if (!write_version_h(versionh, versions))
+		return -1;
+
 	return 0;
 }

include/xline.h

@@ -1,10 +1,9 @@
 /*
  *
- * (C) 2008-2014 Anope Team
+ * (C) 2008-2017 Anope Team
  * Contact us at team@anope.org
  *
  * Please read COPYING and README for further details.
- *
  */
 
 #ifndef XLINE_H
@@ -12,12 +11,15 @@
 
 #include "serialize.h"
 #include "service.h"
+#include "sockets.h"
 
 /* An Xline, eg, anything added with operserv/akill, or any of the operserv/sxline commands */
 class CoreExport XLine : public Serializable
 {
-	void InitRegex();
+	void Init();
+	Anope::string nick, user, host, real;
  public:
+	cidr *c;
 	Anope::string mask;
 	Regex *regex;
 	Anope::string by;
@@ -32,10 +34,10 @@ class CoreExport XLine : public Serializable
 	XLine(const Anope::string &mask, const Anope::string &by, const time_t expires, const Anope::string &reason, const Anope::string &uid = "");
 	~XLine();
 
-	Anope::string GetNick() const;
-	Anope::string GetUser() const;
-	Anope::string GetHost() const;
-	Anope::string GetReal() const;
+	const Anope::string &GetNick() const;
+	const Anope::string &GetUser() const;
+	const Anope::string &GetHost() const;
+	const Anope::string &GetReal() const;
 
 	Anope::string GetReason() const;
 
@@ -110,6 +112,8 @@ class CoreExport XLineManager : public Service
 	 */
 	void AddXLine(XLine *x);
 
+	void RemoveXLine(XLine *);
+
 	/** Delete an entry from this XLineManager
 	 * @param x The entry
 	 * @return true if the entry was found and deleted, else false